Видео

Hi. Thank you very much. I currently have a used master cylinder from a KTM 390 Duke. The OEM master cylinder started to bite, so it had to be replaced. It is better to install a radial-type master cylinder, these are usually installed on sport bikes.

Interesting, thanks! The OEM master cylinder of our CB300R is 13mm I think, so to have a stronger brake I would need to get a smaller cylinder (so we have greater hydraulic advantage). Guess the 390 is smaller then? Thank you very much!

@@nandodean6759 I didn't measure the diameter. The OEM master cylinder and the KTM master cylinder differ in their internal design.

The ABS fuse has been removed. That's why you can do a stoppie.

@@VictorMikulin What happens when you remove the ABS fuse? Does the speedo stop working? Any other effects?

@@themotoevolution The speedometer works. Only the ABS light is blinking, signaling that the ABS is not working.

Дані взяв з Dragy і наклав на відео яке знімав на камеру. Верхній кружечок - це температура повітря. Великий - це швидкість. Правіше від швидкості - це перевантаження при прискоренні та гальмуванні.

Thank you. Life goes on as long as we breathe.

Thanks

@@SerhiiMariukhnyk Дякую 🙂

This video was shot in the summer of 2024. Now we have bad weather for training. I am waiting for spring so that the temperature is closer to + 10.

У мене все ідеально. Дивився на компі і на телефоні.

@@weetalic6167 www.motionpro.com/product/08-0536

@@weetalic6167 Щоб повітря змогло посадити покришку на диск. Проблема при бортуванні безкамерних шин в тому щоб спочатку відтиснути покришку від бортів диска, а потім надіти назад.

Дякую 🤗 Я хочу спробувати ще один лайф хак по заміні шин. Якщо все вийде то теж викладу відео

Wheel blocking with front brakes.

Super. I really like this motorcycle.

@@VictorMikulin Do your crash bars protect you foot pegs/brake/shift lever at all? Or are you having to replace those often?

@@xactoo Crash bars and hand guards fully protect these parts.

@@igor1467 я теж пробував їздити з передньою зіркою на 15 зубів. Для джимхани вона мені не сподобалося. Потрібна динаміка розгону. Тому я більше року катаю на 12 зірці.

I'm fine and so is the motorcycle. Although the fall is quite hard and not pleasant.

@@VictorMikulin Good to hear everything is in one piece :). What was cause of this crash? Too much front brake?

@@KestasLi I pressed on the front brakes at the moment of tilt change the motorcycle.

Thank you 🤠

mgym.fun/westpistards/CurrentResults.php

Це Dragy. Взяв дані з нього і наклав на відео з камери

Oui

Yes :) Next year I will use it again.

Thank you. There are small modifications. Increased idle speed. See the description under my latest videos for the main mods listed. Factory exhaust.

Hi. Thank you. Idle speed 6500 rpms

I didn't do anything with the suspension of the motorcycle. The front fork is filled with Motul 10w Factory Line oil. All changes in the motorcycle that I ride are indicated in the description under the video.

Thanks Viktor! The 12T front sprocket causes any damages or incompatibilities in the chain guide? Or does it fit without problems? I am thinking on moving from the 14T to 13T but I might consider 12 also. Guess changing plate from 36 to a bigger one isn’t necessary, right? Thanks!

@@nandodean6759 - 1 tooth on the front sprocket, it's like putting + 3 more teeth on the rear sprocket. The motorcycle will accelerate faster. The chain can be used for 106 links.

Thanks Viktor, I will try it!

Добрий день. Думаю що зі зростом 180см буде теж норм. Якщо готові до того, що мотоцикл під вами буде виглядати маленьким. Для високих людей можливо краще BMW 310 Adventure. Мій мотоцикл вже наїздив 30 тисяч, поки що все добре. Якщо мотоцикл нормально обслуговувався і його не намагалися розірвати, то все повинно бути добре. Звісно перед покупкою треба щоб його подивився механік. Краще брати вживаний мотоцикл бо він у вас все одно буде падати. Новий з салону дорожче коштує і кожна подряпинка сильно пригнічує.

@@VictorMikulin тебя спросили на русском, чего выпендриваешься на мойве? Schw@in. Так понятно?

@@usapower6208 Дякую)

Дякую 🤗

Дякую)

ABS was specially disabled. Very soft fork from the factory. When closing the gas, the suspension compressed, then went uphill, and at that moment I pressed hard on the front brakes. The reason for the fall is my braking error and very soft suspension.

ABS would not help in this case anyway

🤠

Як книжка пише 😁

This is already a way out of a reversal. Speed ​​too high.

Skill issue

Thanks 👍

Дякую :)

Thanks. Героям Слава!

Thank you :) Dima temporarily decided to take a break from Moto Gymkhana.

по намитому))))

Remove the plastic around the tank. Raise the tank. You may have to remove the tank for better access. It is not necessary to remove the throttle valve and the air filter.

Hi again Viktor. I have tried to get 16029-MBW-601 part but it’s discontinued at Honda. I am searching for a generic alternative - can you please confirm the screw needed is an M5? I see many M4 alternatives but nothing in 5mm diameter… thanks!

@@nandodean6759 www.ebay.com/p/2290523707

Thats 16029-MBW-J21 instead of -601, guess it’s also valid? Thank you!

Hi again! I managed to get the -601 in a french website and have installed in mu CB300R. I did have to remove the tank, air filter and pull a bit out the throttle body, as the frame was too close to the idle screw and it was impossible otherwise. Thanks for your help!