Видео

Hello, Are you interested in testing products?

you make that seem so easy. no doubt you're a talented mechanic. i like your turn signals. can you please share a link or more info on them? i wouldn't mind adding those to my thurx 1200 r. thanks for sharing the great tutorial vid.

Hey man I’m doing this right now on a Dyna chopper I’m building 07 and I deleted the whole left said and ran my headlight to a toggle which connects to a chopper car style off on start key ignition switch I didn’t need to keep any of the left side right if I’m running my headlight like that? On the right I cut out everything but the grey wire which runs to the accessories terminal on new switch so when on it has power and the black and red to the start terminal so when turning the key it powers that wire. With the way did that did I need to keep either of the white and black wires? I changed my key ignition from in the neck to new switch and connected red and grey and red and black together and ran to the accessories terminal and red wire to the battery terminal to give the switch power. Sound right?

That's definitely a keeper video for the novice or new dyna owner DIY Mechanic nothing left out .👍

Can you fully turn the bike on? I never lock my fork 😂😂😂

Thanks for the video. I just finished the installation on my Thruxton RS. This video helps a lot.

Brother Would this set up work on 2005 Electra Glide Cvo?

Didn't you replace the front blinkers, completing them at about 10:14? In the last shot, I still see the pumpkins. I like yours better than the stock LEDs on the 2024.

Nicely done. I have a 100 miles on a 2024 Tenere and I am missing the Protaper Pillow Top grips with every mile ridden. Added "A Night Alone" to my regular rotation playlist.

Can I use the original clipons with the fairing?

Nice work. Looking forward to see more of this cool build!

I wish it worked with the handlebar risers.

Thanks for the video , I just picked up a 1986 Electra glide classic and the radio don’t work . I was looking to see how to take off the front farring and your video shows how to do it clearly . Thank you . By the way what radio are you using . Mines still has the cassette player and I wanted to up grade to something Bluetooth compatible?

If you want to save even more money you can make your own vinyl wrap with wood glue and Saran wrap. You can make it whatever color you want to you can just spray paint the Saran wrap beforehand.

I would wrap the tail too !

I have a 1987 FLHTC my self and i hear a strange sound somewhere betwin the font pulley and the hub bearing. You help a lot with this video, thank you. Take care

What exhaust is this?

Any clips without db killer?

Great video! Can you provide links where you picked this stuff up at please! Thanks!

Nice job man! Enjoyed the video. Good upgrades, and that exhaust sounds mean.

Such a great looking bike. Can't believe its discontinued. Did you get more power with the 2 into 1?

Dang thats one friggin beautiful Thruxton. Any idea if the Fairing and mountings could be fitted onto a Speed Twin 1200 2022?

What seat is that

a fridge is a source of ozone, and ozone is an agent which kills tires on your motorcycles

What year is this? Ive got a 95, wanting to put on some bars around 8", hoping to replace as little as I can. Hard to find much online the 90s-03 bikes and bar swaps.

This was super helpful but I was sweating bullets seeing that snap ring and no glasses combo 😂 thanks for the resource man!

What type of tool did you use to take off those bolts from the rear breaks

Why did the brake pads and the link look completely different than the ones you used in the video?

Bro what is that switch wiring job😂 good video but that electrical tape job is hilarious

Would you happen to know the name or part number for that red blue and black housing connector on the stator? Thnx

Damn! Thanks for the shout out bro! 🙏🏼

So at 2:35 , if i just wanted to adjust the handle bar down(closer), could i just loosen those 4 bolts? Or do i need to loosen more? Or is it not adjustable?

Should put a belly pan would complete the look

Qual a medida do penel

I did it last week. Happens to the best of us in the worst situation! Skål jockey shift forever!

Nice bike!

You didn't have to balance the tire?

Where did you get that front end lift from? Ive been searching forever to find adapters or a specific lift for my 97 Dyna FXDS.

RUclips is full of these videos and they all make common mistakes. You need to check the width of the rotors with a micrometer to see if they are within spec. That rear rotor is done. Secondly, you are putting new pads in contact with the discs. The discs need to be scrubbed with 120 grit emory cloth, then cleaned with brake cleaner, or you will just contaminate new pads with particles embedded on the disc surface. This is especially important if you previously used organic pads. This will ruin a new set of metallic pads. Thirdly, these Kawasaki lines are junk after 5 years, replace with braided lines. And finally, you cannot use a long extension with a torque wrench, you can over torque this way.

2 years later, what exhaust is that? Nice!

great work, thanks for this. curious - why choose a riser instead of just changing bars? i’m considering both at the moment.

Thank you

Great video! I just did this to my 2015 Dyna Wideglide yesterday but it looked way different than your dyna. I even had to remove the inner primary housing to get the rotor out because they changed the geometry just enough inside the primary to where you can't slide the rotor all that way out.

A few years late BUT is a headlight extension block needed to run the t sport fairing on a dyna?? Thanks bro.

Do you waive the torque settings of the bolts/clamps for the top triple tree ? When putting;g it back together

hey great video man! i just got a 2003 dyna low rider and its got a fender from a wide glide im tracking down proper wiring and a good aftermarket tail light like this as it didn’t have anything when i got it

My confusion is about something much more simple: I have the same bike, with the same fairing. How the hell do I get to the headlight bulb? I am a total midwit when it comes to wrenching. Help?

Great instructions. Just finished installing my fairing as well. Thank you!

Any change with the jetting switching from the s&s?

How hard was it to get the compensator bolt off with that tool? Experienced friend of mine told me he has never been able to use a breaker bar. Asking before I buy everything and try myself lmao.