Видео

I’ve never ever had an issue with them. If you get water on them they can smudge, but other than that they’re perfect for candles, tins and glasses. I’ve never heard of them wrinkling before 😀 These work great! Thanks 😊

You’re welcome, these ones are nice and easy to string up.

@@chris01479 Thank you for watching the video. I haven't been printing waterproof labels with water-based ink. To protect water-based ink labels for outdoor use, you can try the following methods: Laminate the Labels: Use a clear laminate sheet or tape to cover and protect the labels. Spray Sealant: Apply a clear, waterproof spray sealant over the printed labels. Use Waterproof Labels: Purchase labels specifically designed to be waterproof. These steps should help protect your labels from getting wet outdoors. That’s all I can really think of, so hope it helps.

Yes, Goof Off can remove paint. It is a strong solvent that is designed to remove adhesives, stains, and dried paint. However, it can also damage the underlying surface if used improperly, so it’s important to follow the product instructions and test it on a small, inconspicuous area first. Thanks.

It can be frustrating when your labels don't match the available templates. Here are a few options to consider: Online Template Creators: Websites like OnlineLabels.com or LabelJoy offer customizable templates where you can input the specific dimensions and layout of your labels. Custom Template Software: Use software like Adobe Illustrator or Microsoft Word to create your own template. Measure the spacing and size of your labels and create a custom layout. Third-Party Label Suppliers: Companies like UPrinting or SheetLabels might have compatible templates or offer custom printing services. Hope this helps. Good luck.

@@PurchaseReviews thank you so much!!!

@sweetpeasscentyessentials You are welcome. Thank you ☺️

Using a 40:1 fuel ratio in a weed whacker designed for a 50:1 ratio might cause some issues, but it shouldn't prevent the engine from starting entirely. The 40:1 mix is slightly richer in oil, which can lead to more smoke and potential fouling of the spark plug, but it should still run. Here's what you can do: Check the Spark Plug: Remove the spark plug and check if it's fouled with oil or carbon. Clean or replace it if necessary. Drain and Refill: Drain the 40:1 fuel mix and refill the tank with the correct 50:1 ratio. This ensures the correct mix for your engine. Prime and Choke: Ensure you are following the correct starting procedure: prime the engine, set the choke, and pull the starter cord. If the weed whacker still doesn’t start, it might have another issue such as a clogged carburetor or fuel line. I had the exact same issue with a petrol weed wacker I was fixing a few years ago. I basically had to give it a clean from the inside out. Thanks

@PurchaseReviews Thank you soo much for your detailed response!! I genuinely appreciate it!! I really didn't think that it would prevent it from starting. I have primed it and pulled the string over and over and over while using the choke in all 3 positions. I'm only 35 years old and I just legitimately could not pull on that string anymore. It's unbelievable how big of a workout that is, lol. I wasn't able to mess with it today as I needed to cut my grass which takes a good 5-6 hours and has occasionally taken over 8 hours. I just used the 2 weed whackers I've been using. I use 2 different ones because one has string on the head and I put a different head on the other one that has metal teeth on the end for thicker brush and the thicker weeds. That way I can just grab the weed whacker I need at the time instead of having to take the head off and put the other one on every time. I'm really trying to get this one fired up so that I can put an all metal brush blade on it. Then I'll be able to start pushing back my woods line that's been starting to take over my yard. I'll keep you posted on the progress!! Again, thank you for your quick response and the best answers and advice I've been able to receive from the 20 other places I've looked for answers!!

@OhioBoii330 You are welcome, anytime 😊

Hello, it says that it can also remove scratches from resin, but I have never tried it on resin so I couldn’t give you a definitive answer. I’ve only ever used it for removing scratches from Hesalite watch crystal.

Much appreciated. Thanks so much 😊

Do you mean like a film wrap to keep dust out? If that’s what you mean, then no. I usually box them up and sell in orders of around 30 -40. I’ll only use some bubble wrap to protect the tins from denting, and that’s about it.

@@PurchaseReviews sealer from the rust

@jonystube oh ok, no I don’t, the tins I use are made from aluminium, so they don’t rust.

Around an inch of slack, or a fingernails length is fine 👍🏻

Wow, amazing that it’s still in tune. I’ve seen some of the new ones now cost around $300, almost unaffordable.

Only if it’s made from acrylic glass, otherwise it will not.

No, the labels I use are not waterproof.

Yes, locking tuners can significantly improve the tuning stability of your Fender Player MIM when using the tremolo. Locking tuners work by clamping the string in place, which reduces the amount of slippage and movement that typically causes tuning issues, especially when using the tremolo bar. Some of the reasons why locking tuners are beneficial: Reduced Slippage: Locking tuners prevent the strings from slipping around the tuning post, which is a common cause of tuning instability. Simplified String Changes: Locking tuners make string changes quicker and easier, which can be particularly helpful if you frequently use the tremolo and need to re-tune often. Increased Stability: With the strings securely locked in place, the tuning stability is significantly improved, allowing for more aggressive use of the tremolo without the strings going out of tune. Consistency: Locking tuners provide more consistent tuning because the strings are anchored in the same position every time, reducing the variables that can affect tuning stability. Many guitarists who use tremolo systems find that switching to locking tuners makes a noticeable difference in maintaining tuning stability. It is a relatively straightforward upgrade that can enhance the performance of your Fender Player MIM. Thanks for your comment, and good luck with everything 🎸 😊

Stainless steel appliances, yes you can. Granite I’m not sure, it could stain the granite, maybe test it on a small area under the countertop first. Thanks

@@PurchaseReviews thanks a lot for the prompt reply . You are awesome !😉

Thanks so much 😀

Haha, thanks. I’m Australian, but was born in the Netherlands 😊

Your welcome 😀

Yes, the Kit-Cat Klock is indeed mentioned in Stephen King's novel "Bag of Bones." In the book, the clock serves as a minor but memorable detail in Mike Noonan's summer home, Sara Laughs. The clock, with its distinctive rolling eyes and wagging tail, adds to the eerie atmosphere of the house and contributes to the supernatural occurrences that Mike experiences. The quirky nature of the Kit-Cat Klock contrasts with the darker themes of the novel, making it a notable detail for readers.

​@@PurchaseReviews i thought first it was felix the cat clock, but then it say the clock is broken and the eye is fell off, it make me think its not felix the cat clock because it have eye move behind the plastic eye. So it must be another similiar clock.

Thank you 😊

Thank you for the comment. You are welcome 😊

Ethanol and oil do not mix well together. Ethanol is a polar solvent, and oil is non-polar, which means they can separate when mixed. This separation can cause inconsistent lubrication, potentially leading to engine damage.

@@PurchaseReviews wondered why u had some there?

@@goldeneagle99 nope, it’s just regular unleaded fuel.

From the Avery website.

You can select the size you want, and they will send them out to you.

Can also use WD-40

You are very welcome

Your welcome, thanks Sherik

Up to two years if stored properly. I keep mine stored in a cool dry room. They are also kept in airtight containers. Thanks

@@PurchaseReviews Thank you 😇 That was helpful 🙏🏼

Thanks Michael 😊

Very handy portable tuner. Good for alternate tunings also. I got one of those Warus tuners a while back for my rig, have you seen those? There’re also amazing. Have a good day 😊

I change mine yearly for the same reason, only a few of us are using it. They recommend changing it yearly.

Thanks Sarah, it’s either I get lost in terrarium’s or planted aqua-scape aquariums. Love it 😊

Also, I found this container on hard rubbish on the side of the road. Couldn’t believe someone would just throw it away.

@@PurchaseReviews it’s crazy right!? I payed $3 for this 🙂 one of my best finds ❤️

@@PurchaseReviews you are very talented 🌿🙂

@sarahk4047 yeah, people are strange, they don’t know what nice stuff they have, and so they just chuck it out 🤔

Thanks so much for your comment. You’re very welcome. Much easier to make the tumblers when you have the correct information to follow. Thanks again.

They’re almost sounding like some kind of accordion. Yep, I also still polish mine too 😊