Видео

I've had them for 3 months and all has been good with them. Only complaints I have are one of my outer lights that use the white plastic bolt with the spring didn't line up well so it was a pain to put in so there's a slight gap along the top but can only be seen if you are standing right next to it looking down from above. Then I added some caulk along the top edge of the outer lights since they didn't look well sealed in some spots. But otherwise they've been great so far.

Thank you, I’m glad we could help confirm it!

That's odd, that should have worked. Next step I'd say is to make sure the pin is all the way in and all the electrical connections are good? Is it lighting up when in reverse, and if so what color?

Whelp at that point best to fill up even if having to with the hose going around the car.

The extra one? Which light is it coming from, the outer lights or the hatch lights? There are two connectors that have yellow and black wires coming out. One is a grey colored connector shown in the video at 8:26 that goes to the black resistor boxes for the outer lights. Then the second connector is a small black one with long yellow and black wires coming out that connects between the outer light and the hatch light to get the sequential blinker.

Yeah i just pulled it out of the housing. It was really hard to pull put. You could try pushing the silver pin downward a bit and pull the blue wire since those silver pins on the end of the wire have a little botch thing that helps it stay in the black housing.

Does your switch pull out at all even though you dont have fogs? If it does then i think you could use that switch but if not then youd probably have to look at getting a euro switch which has all the settings like parking lights and both front and rear fogs. Thats how mine is at least. Id have to get a euro switch to get rear fog functionality. Then if there aren’t any kits out there for the mk7 Rs you could look at getting mk7 gti fog harnesses to use with that switch and then lights that fit your bumper.

Thank you! I’m glad you enjoyed it :)

It is definitely worth it if you get the chance!

That was about 2 kilometers from the track. The whole area feels like Motorsport Heaven, definitely worth a visit if you get the chance

They are kind of loose in the corners furthest from the door handles. I added some double sided tape to the back and they've been good.

Hmmm that sounds not great. Going to try carving the glue out? I'm planning to use a little double sided tape to help keep mine in snug.

​@playingcars9577 Take panel off and drill them out if you want to take them off, otherwise just lay the vinyl with them in place, it works perfectly.

Thank you! Glad I could help you out!

Indeed. I got a couple puffy wind cancelation things for the current mic to try out first.