Видео

Hi, do you think the onboard processor and ram can be replaced/upgraded? I feel it does get under powered for an intense workload and liver performance.

hi! i have the same one and i try to change some settings but every time i turn it off and back on they go back to how they were before i changed them!!! and my camera makes these beeps when shutting off, can you help?

Thank you so much!

Super návod. Díky.

Excellent. Couldn't work out how to get the back off. Hidden screws under the screen housing? Who would have thought. Saved my TZ57. Thank you.

Perfect,i prefer adding just a little bit of milk and i was just wondering how to do that ,thank you so much!

Dziękuję! Dzięki tobie zdjelem obudowę bezstresowo bo męczyłem się i bałem ze połamie. Nie każda ściąga się tak, samo a ja mam ten model. Wyczyściłem i jest tak cicha że ledwo ja słyszę 😂😂 wcześniej chodziła jak traktor na polu. Że zagłuszają telewizor 😂. Dziękuję! Teraz będę czyścił częściej bez obaw że coś uszkodzę 😊

Came into one of these printers entirely by happenstance lately with no guide or anything, so, honestly, you are a LIFESAVER. Just showing me how to pull the tube out along with the rest was huge. I know it's been two years since you uploaded, but I want you to know it made my day!

Is there anyway to repair the plastic lid if its broken off of the supply reel? Im attempting to glue it back on but i have no idea what to do if it wont stay. The didnt seem to make the reels with the ability to take off that plastic cover part.

Hlavně tedy musím říct, že nám přišla bez ochranných folií na celém čelním panelu. Tak trochu pro mne záhada. A tedy prádlo malého dítěte ( body apod.) na šetrné sušení pozorujeme u rukávů a jiných místech nedosušené :( Celkem uvažujeme o vrácení

Dobrý den, prosím o info. Máme tuto sušičku, vidím, že i Vám ihned po zapnutí (v čase videa 5:47) píše sušička "Zdravím...." Nejprve vyčistěte filtr. Je to standartní hláška, která "pro jistotu připomíná" při každém spuštění sušičky tuto skutečnost? Pořád jsme nevěděli , proč to píše? Filtr vyčištěn a nikde jsem se o tomto nedočetl ani v manuálu.

Thanks for a great video. It made my battery swap easy. I used a generic battery that initially showed zero charge, which I thought was unusual, but it appears to have accepted a charge well.

Hello The LS1 is a nice camera and works very good. Have one and made two slideshows of sample images on my cannel :-). Greetings from lower Bavaria.

Very helpfull. Thank you so much 🙌🏻

Dobrý den. Podle názvu kanálu si dovolím psát česky. Chci se zeptat, zda nemáte nějakou zkušenost s řešením "bricknuté" MC-101. Omylem jsem jí vypnul během aktualizace a od té chvíle nejde spustit. Je již mimo záruku, z žádného ze servisních míst v rámci ČR (na které mne odkázal Roland) nereagují. Moc díky za reakci!

This phillips company makes useless trimmers which no one can repair, even the company itself cannot repair them. I bought a phillips 5000 series trimmer machine for 200€ and it stopped working one day and I took it to phillips store/care and they said we can't fix it bcz I don’t have that component which components damaged and I took away the trimmer machine to a local electronic technician and he did several checks. After seeing and telling that many of its components are damaged which are not available in the market and he angrily said that the DC motor of this machine runs on 1.2v dc and its battery is 1.2v then why install such a big circuit board in this machine. There is a need and its charger output 15V dc supply, why not install a small charging module in it and run it directly on the battery and there will be very little difference in the customer's pocket. If someone is thinking of buying a Philips trimmer machine, then they should buy the lowest price trimmer machine, so that if the machine is damaged, if it is not repaired, you will not waste much money while buying it. Sorry for my weak english.

Wonderful .. thank you for taking the time to share .. i love my HX and am trying to replace faulty lens .. wish me luck 😀

Thank you for making these vida, they're always useful

Good video. I still can not figure out why the machine gets jammed and no longer sprays the bottle. The bottle itself is fine, the machine just will not do as it was designed to do!

sir lens new miljate hain online

An excellent video, showing very clearly each step and identifying the important parts. Thank you!

Hi thank you for this unboxing video. Just want to ask if the charger and battery are included from the box? Or you bought it separately? How long can you use the battery with full charge? Thanks in advance.

Hello, I have this same charger and has always worked great but for the last 2 weeks one side charges and the other side does not? I put a battery in and the light turns red like it is charging but never charges the battery, ay suggestions? The left side works fine, just the right side is no longer charging... Any suggestions? Thanks

Thank u

Thanks

Thanks!

Good video! Thanks for sharing. My C note buttom is not working properly, need to press harder then the others. Maybe is dusty?

Any idea if I could use this technique on one of their rugged phones? Other videos show people taking apart the whole phone, this one made me wonder if that's really necessary...

Thanks!

thank you for your hard work and sharing this video.

My launch Switch really heats up. REALLY bad. Now, it’s not overheating thankfully. But it’s time. I’m putting the Corsair XTM50 high performance thermal paste on it. Looking to see if I should put on some thermal pads to other chips. After, I think the Switch will be super thankful and run much cooler. Hopefully.

Thank you!

Can you help me? I bought the same model of the cleaner today, but it is not turning on. It only blinks a bit when I press the power button. Yes, I charged it like 3.5 to 4 hrs before use. Please help.

Omg, after 2 years finally I can make more milk foam, thank you so much 😁

This helped me a lot thanks men

Hi! Did you use a heat gun?

I love it how this product has a label at the bottom that clearly says : no serviceable components inside, yet when it brakes down, it's components are quite easy to service. My unit had an issue where the front buttons didn't work, took it apart, reconnected the ribbon cable front the button assembly pcb and they came back to life. No idea how that could have caused the issue.

Actually instructional, with no nonsense and a lot of closeups. Must have taken some time to film. Maybe the music is a bit much but you can watch it muted.

Need a special battery o is just a normal battery?

Looks like my ge76 has a similar issue. Not sure what to do

Thanks. Exactly what I am looking for.

Do you know if it's possible to get at the keyboard? I spilled some water on my laptop a few weeks ago (mostly been off since trying to dry it out) but now two keys aren't working properly, when I first boot up the C and B keys work fine but after an hour or so they stop working; except they work again if I mash them a bit, and the RGB still works and color cycles like the rest of the keys. I took the cover off thinking I'd try and clean it out but looks so daunting to think getting past the internals, would it be worth it to try or am I just making a mess?

Good very good

Hello, did you disassembled this camera further? I'm trying to take motherboard out of the camera body(trying to replace plastic battery holder), but no success Can you give advice how to put it out?

Amazing I cannot believe you don't have any comments on this I'm going to subscribe now and hit the bell. Keith

Thank you. Fixed mine with the help of your video.

wow thank you, honestly great video, but by the time i saw it i was so frustrated that i could hardly bear to watch the intro!

Omg thanks im so dumb i had 2 controller sets was trying to setup for 4 plays XD

Thanks a lot for this video. My old PS4 had more screws on the back and so a different way of opening it easely. The model i have now is the one in your video. I was struggeling with understanding how to remove the bottom part. Your video showed how to. Cred to you making this video 😁👍

I just got mine for Christmas and can't wait to start using it, but I need more hex bits. I don't know what size/type to look for? Any help would be appreciated. Thanks.