Видео

Nice

wth, Intresting choice to run this pc with ur TV but I just dont see the point, 9590 was worst cpu in that whole line up it had no benefits over 8350 and just a bit faster than 8370e that only used 95W, but putting fx line aside there plenty intel i7 cpus 6th gen 7th for pennies that blows this cpu out on stock speeds without any oc required and so much less heat. When I heard this cpu goes for 100$ on ebay I though to myself maybe those stock was not sold out for so long that seller forgot that still selling these cpu, for 90$ I saw 1950 amd threadripper being sold in quite few places and that cpu has 16 cores and still 180w... still interesting video

I have a problem with my 2015 jetta Se tsi 1.8 L. I was driving this morning and suddenly the check engine light was blinking and the traction control and EPC lights both came on. Everything I’ve been able to find online points toward replacing the engine coils and spark plugs. I had the spark plugs replaced about 1.5 years ago at a vw dealership. Do you think replacing the engine coils would resolve this issue? If I try this should I also replace the spark plugs even though they were replaced somewhat recently? The car is just below 180k miles

Mine arrived last week and fitted it. I did have a problem with the radio buttons not working once it was installed. A little cable tie mod underneath the switch to lift it up a little and it works perfectly! I love how it look in the car.

Great video, thanks for making and sharing this with us! I'm considering purchasing a 2025 S3, and if I get one I will definitely be upgrading this trim piece as well. <Cheers, Joe>

Just bought one for my RS3 8Y. I hope it will look better that the piano black!

cool this video comes at the right moment, i am rebuilding my fx system for server things, Video Coding, nas and for fun. and i have the sabertooth 2.0 Gen 3. But i am able to run the memory 32 GB @ 2400 Mhz on my FX8320 CPU. I still need the old cpu fan to make my setup complete, but then i can post some informations here. There are some scenarios where PCIe 3.0 does matter beside NVME. I used the board on linux and windows, and on linux folding @ home for example ran quicker using PCIe 3.0. (GPU Folding, CPU Folding is always faster as linux is more efficent with multithreaded Cpus) Today , i would think about NVENC Coding on GPU, where the cpu is pushing data towards the GPU as fast as possible, that might benefit, a bit, too. I will test it. I am glad i saw in your video, that there is an option with e modded bios to use nvme, ´cause that does matter A LOT at video coding! Thank you, great Video!

Scary

All around beautifully done from the 1st to this last video... perfect.

Thanks for the video! I have the same car and was wondering if the valve open sound was annoyingly loud. I think I might just get the non-valved version.

🙂 i have three different am3+ boards, and i checked the cpu support list, looks like the highest is 8350 8370, the cpu u mentioned i check on ebay and theres two different FX 9??? and those cpu's are kinda sketchy because it looks like not just any motherboard supports those cpus, i think u have a much larger pool of compatible used boards if u stick with 8320 8350 8370, unless maybe you can tell me if FX9000 posts even tho its not on the cpu support list? thanks for the video

🙂 the 7900XT has dropped to a new historic low of 700 bucks

Damn, I have looked like this directions a lot, thank you

The ONLY video on YourTube that shows what a bitch getting the connectors to the coil packs off. I spent an hour trying to get mine off and gave up for fear of breaking them.

Learned this while working on my jetta but to get those style clips out just push them in then pull the tab like normal and pull back out, has a 95% success rate

Good video. Short and to the point. RSE10 looks great on your GLI.

Was going to do a max am3 or i3-i7 ddr3 compatible. But this showed me aint worth it in long run since ddr6 is coming out next year but congrats on solid 720p killer and low 1080p!

I really liked both this and CAST's video taking a look at AM3+, really awesome content!

You’re suppose to add a thin amount of anti-seize or grease on the hub centric part of the hub not cake it on the back of the spacer.

You’ve done old CPU content why not old GPU content?? Bring in some old Radeon Fury cards, maybe some NVIDIA 700 series stuff. Its crazy to think about how old that stuff has gotten

Came for VW Jetta mods, stayed for AM3+ content

I had the Asus Sabbertooth 990fx R2, actually preordered it, and had a pre binning Fx-8350 chip, and 2400mhz ram. That hot boy Ran 5ghz all day long for like 10 years at only .010 over stock voltage.

i have two of those motherboards Sabertooth 990FX R3.0 and the sabertooth 2.0, i still use the r3.0 board today with a fx 8350 overclocked to 4.8g, i wanted to get the ASUS Sabertooth 990FX Gen3 R2.0 but its to expensive for such a old board...i love messing around with old hardware.

Love the intro!

Hey, have the same car in the same color. Upon jacking, did you use a pinch weld adaptor for the floor jack or did you just jack it up on the pinch weld itself? New to anything car DIY, so this helps a lot.

just use a Dremel

How did you get windows 11 working with an FX cpu or not compatible cpu?

Thats what the screw on top is for. To adjust the seam

Great video!

Are you happy w the 15mm I was thinking of doing 12mm. Your thoughts?

How have they held up so far? Are spacers safe? Thanks! Car looks sick

I enjoyed the 3 videos of this series, as I've owned 3 computers with AMD cpus ranging from a phenom x4 9650, a fx 6300 (which I also learned how to overclock), a ryzen 5 2600, and today I own a ryzen 9 5900x. Why I say it was 3 computers is I'm still using the case I built the r5 2600 pc in, but everything except the fans and psu has been upgraded now. And along the way I've had my fair share of good and bad upgrading experiences. Upgrading gpus was interesting for me as I mostly play Minecraft, which is cpu intensive, but not multithreaded, which meant that cpu/gpu combos that would be balanced in other games, would be cpu bottlenecked in Minecraft because of Minecraft only using 1-3 cores heavily even while running shaders. Back when I was daily driving my fx 6300 PC, I've always wanted to know how upgrading the cpu to something like the fx 8350 would affect the performance of it, especially after I had upgrading the gpu in it to a r9 390 I was given by a online friend, but I opted not to spend 150$ on a obsolete CPU and happy I didn't even tho I was almost too curious to not do it.

I think you'd be able to get that card in there if you put it in at an angle. I have a similar kind of case with a lip all around and I've squeezed in a TUF 4090 that once inside it's almost touching the intake fans on the front lol. I do have a liquid cooler too though so maybe your cpu air cooler could've got in the way. Good stuff though I love doing stuff like this.

You got the 3d res turned down to 50% for the 6750 but 73% for the 7900?

Oh, I missed your part 3, gotta check that before I watch this one! edit: You probably could just remove that middle fan, it probably doesn't do much anyway, though this was just a test and the permanent GPU will be the 6750XT, right?

How are they holding up 2 months later I do a lot of high way driving recently got a small rock hit on my back side door. Would you recommend

Are those the factory summer rubber? If so how good/bad is it on snow? Looks good!

What is the diameter of the wheel hanger you used? Thank you

How did you get the metal clip to screw into the headlight housing? What are you holding onto and twisting? When I try to install, everything just spins.

nice.

I'm surprised you did not go with the asus tuf sabertooth R.3 that came with m.2 slot on board

How did you get windows 11 on an FX cpu? windows 10 say my Fx 8370 can't use windows 11

I wish I had a fx9590 but I have two fx8370 😁

ruclips.net/video/IUoO4b3ifTI/видео.html

Cool

Can you please provide the tools you listed with the sizes in writing

good video i jujst got one for my audi b8 a4, mine takes 5l flat. About to do this later tonight to my car, but am struggling to get the hose extensions on, any suggestions?

My one and only SLI rig was woefully obsolete when I built it last year but it was fun to see just what an early SLI rig (2x7800GTX + C2X) could do. I've run a modern GPU with a C2Q. It is pointless but it works...sort of. About the most GPU you could reasonably throw at this without severe bottlenecking is like a 1080 Ti. Converted into 30 series terms, you're looking at a 3060, roughly speaking. I'm running a 3060 on Gen 3 with no issues. Of course, I have a 5600X which is a much more suitable CPU. However, I have run my 3060 with a 2600 (played Starfield on that) and, with overclocking, this FX will likely have a similar single thread score. Congrats on the BIOS mod. that's quite an accomplishment.

I love madness. I usually don't go to that extend to buy/sell/buy/sell multiple components to achieve what you are after, but I usually pick up trash/old computers and try to get the second or third best CPU/RAM it can run and drop a GPU so that I can build another PC. Sadly, this way of doing things has let me to gather too much cases and mobos that I don't even know how to get rid of, haha. Anyway, a few of these PCs I got for cheap/free were AM2/3/+, but like you said, it was much cheaper to go intel, so the AMD mobos I have will probably end on the trash or second hand market for really cheap. Hope someone like you comes across and enjoys some old and slow AMD chip.