- Видео 21
- Просмотров 217 599
mcedsonrunescape
США
Добавлен 23 сен 2008
.
Fixing GE Energy Smart LED Christmas Light Strand
Disclaimer: this fix is not a universal fix. There could be other problems that cause your light strand to stop working. I am only offering the testimony of what fixed my light strand completely.
* I do not recommend using these lights in a way where they can be rained or snowed on. I have had a handful of white LED versions running for years without one problem because they have been kept away from rain/snow. *
There are no replacement bulbs for these models on the market at the time of recording this. Only Ebay and Etsy have postings for replacement bulbs (3.3V, 0.066W). I bought a cheap 50 bulb strand of lights that uses the same bulbs purely for replacing bulbs on my big strand.
* I do not recommend using these lights in a way where they can be rained or snowed on. I have had a handful of white LED versions running for years without one problem because they have been kept away from rain/snow. *
There are no replacement bulbs for these models on the market at the time of recording this. Only Ebay and Etsy have postings for replacement bulbs (3.3V, 0.066W). I bought a cheap 50 bulb strand of lights that uses the same bulbs purely for replacing bulbs on my big strand.
Просмотров: 716
Видео
Review of Lanzar Heritage HTG257 after 5(?) years
Просмотров 6 тыс.3 года назад
(I couldn’t upload this video the normal way because apple is stupid now. so i had to do it all on my phone.) i used this amp for several years. it worked fine if i could keep it from over heating.
The Elusive Sky Megalodon
Просмотров 194 года назад
This was the easiest meg kill I've ever gotten lol
Rowboat Glitch - Sky Dive
Просмотров 715 лет назад
First I saw a rowboat float up into the air. Then when I later tried to jump into the rowboat the we had on our brig (which was invisible), I think it teleported me to the one in the sky.
Drilling Out 2002 Focus Ignition Lock
Просмотров 183 тыс.10 лет назад
the instructions I read said to measure 3mm down from the key slot and mark the spot. Use a 4mm drill bit to make a small pilot hole, then use a 10mm drill to drill a 35mm deep hole. I can't tell if they want you to drill out all of the "tumbler" things. If you follow those instructions, however, you WILL definitely drill all of them out. If you are able to drill a smaller hole and avoid all of...
Strongbad Space Jam
Просмотров 1,1 тыс.10 лет назад
Another Mash up of Space Jam and "Strong Bad Techno (Rydel Remix) I used the one and only Audacity to make this of course! Didn't spend too much time on it, but I at least tried to even out the two tracks and keep it from clipping so much. lol Thank you to Rydel for making the best remix of the strongbad techno song! EVERYTHING GOES WITH SPACE JAM I do not own right to either "Space Jam" nor "S...
Elektro Slam 1.1 (Quad City Dj's vs Toneshifterz)
Просмотров 4411 лет назад
After finding the slam jam meme, I had to try my own mash-up. this is actually a fixed version (1.1). the bass from elektro shock was too much and made everything sound nasty. so, I removed a lot of the bass to make it sound better I have no experience in mixing nor audio and i used Audacity, so I know this song sounds pretty crappy. it's just for fun
Two example shots of my small air cannon
Просмотров 3211 лет назад
50 psi with 2" cuts of 1" dowel rod. The accuracy is terrible in the wind though.
Christmas eve 2012 (2nd vid)
Просмотров 1011 лет назад
Second video i recorded of christmas eve. It was a couple minutes after the first video. Grandpa was still asleep. I would say that everything turned out great. We thought christmas was going to be ruined 2 days before...
Grandpa sleeps through christmas =)
Просмотров 4111 лет назад
Christmas eve. when everyone is ripping open presents and yelling across the room, good old night-shift- grandpa gets his nap.
Minecraft LED Sign - Any 5 Letter Word
Просмотров 24912 лет назад
If you want a detailed video of how this works, please comment below.
BF3: AT Mine Sabotage Lolz
Просмотров 27213 лет назад
they had around 6 or 7 mines in the middle of the road which is the worst place. so i threw 4 of my own in the middle also. i got 15 different exp things. lolololololol....
what i hate about mw2 online (read description)
Просмотров 5214 лет назад
what i hate about mw2 online (read description)
cloud's (cardboard) buster sword (comes apart)
Просмотров 23 тыс.16 лет назад
cloud's (cardboard) buster sword (comes apart)
summary: dont put amber bulbs
Call a locksmith that knows what there doing moron 😂
This is the best video I've seen so far for demonstration and what you felt you could do better etc. How everyone explains it is that you go straight into the hole and that kind of fucked me up
😂 love the truth you rock
Nice work. This will help me a lot. I have 3 strands of these but they are c6 white.
As soon as your key starts to act up, replace that crappy Ford cylinder with a cylinder from Strattec. Do it before things get too bad.
Thank you for the ingo on the drill process & what it looks like after.
Great
I rarely comment, but Im forced to so others find out ask questions, this method of taking your ignition cylinder out… that takes all of 30 seconds, under the column your see three holes, 2 are for removing the screws so you can remove the bottom shroud, the third hole is for releasing the ignition lock, push on it and it will release the cylinder. Only if you have the ignition on! So no key? There’s a hook tool to release it, because if the lock is off the pin has not rotated making it out of alignment. Stop drilling shit out!
If you can, please help. My shroud is a one piece. Can't get to the push pin to release it. Nobody knows where the key is either. That's why I'm replacing it
Nice video. That was a shit design for a ignition cylinder. 🫤
This amp is 2ohm stable. It isn't 1ohm stable
I mention what the amp is rated for in the video. I said I was going to upgrade to a different amp ( Scarr audio RP-1200.10, which would be able to handle 1ohm stable at 1200 watts. I have been running that for like a year or more without any issues.) but I do say that I did go outside the ratings when I knew I was going to replace it (the lanzar amp). I ran it 2 Ohms bridged (which it's not rated for) but It still ran ok. But if you know how an amplifier works, then you will know that you can technically run almost any amp on whatever resistance as long as you dont go over the amp's power rating.
my ker is tening bt car dosent stat
am asking anyone who can help me plz gyze
my car hard stat bt i don't know egnition cos of thAt
I think you meant fusion sword
No car theif is going to take this much time to steal a car IMO
This video is not for people who are trying to steal cars. This is for people who have the common problem of the ignition cylinder faulting and then their original key doesn't work anymore. I had my original 2 keys and nothing worked. the lock just stopped working. So I made this video because no one else had a video about doing this procedure. the original ignition lock ends up faulting after a certain amount of time.
What’s your RuneScape name
I don't play runescape anymore. I had a handful of different names.
Not sure why you got thumbs down but whatever . I have the same JBL's on a HTG 137 Lanzar and they sound great !
Thx for the info
1:19 I know the feeling.
Sorry I just now saw this. LMAO that was clever. I rarely check my youtube channel stuff.
we are giving this a whirl and seems that the with the knew tumblers, the tumbler does not turn far enough to engage start.
Thank You! Your visual was the best because I could see exactly where the pin location was!
All i heard was too high LOL
You spent way to much time explaining your fails!
Adjustable spanner take any ignition off simply adjust to size of ignition and place over barrel and pull towards you not down
Should have pulled one way or another on steering wheel while jiggling the key
Use good pliers and swist stuck thing out.
Sorry dude,only had to use ice pick to remove tumbler. Didn't drill and it popped out
That’s only if you have the keys
DON'T DRILL !!! Simply watch tutorials on how to remove the ignition assembly, (easy, stuck or not) and when it is out simply remove the tumbler from the housing, (one c-clip) and pry out the side-bar lock and springs, (tutorials on that as well) no more problems, and it doesn't cost a dime. No keys or tumbler to replace or code.
I can't find any tutorials
Where do find this at
I need help.....lost my key 03 chevy tahoe n in walmart parking lot.....I cannot get it to turn all the way over but far enought to light up the dashboard....now left on too long n my battery is drad
in some vehicles... there is a push pin style of lock ina eighth inch diam hole.. mine is almost directly under ign. cyl. key in on position. insert torx style tool an push. my prob is key won't turn atol. !!!!!***!!! IF CHIPPED!!! DO NOT BREAK TRANSCEIVER RING ATTACHED TO KEY CYL. thas the basics
Nah, drill...
you could have just drilled the locking pin since you already took off the hood of the steering wheel
NOT TRUE ON A FORD IGNITION...For Future viewers: Just Drilling the pin out doesn't allow you to get the cylinder out because that black ring on the inside has to be turned and line up with the opening that it fits into. You have to turn the cylinder before it will come out.
Yea it has to be turned to acc to be pulled out so either way your gonna have to pick or drill the lock
If you do the drill out correctly and take out that little lock piece do you still need to buy a brand new tumbler? Can I just take out that piece with the hole and drive for a few weeks? Thanks!
Really appreciate this video man. Gonna give it a try tommorow. Car got stuck at work and had to borrow a car. You the MVP!
but when u change the ignition key what happened with the cheap
+Abraham Rosales Avila the new one is still working perfectly =)
you just have to turn the steering wheel a little to unlock the ignition, you ruined a perfectly good ignition for nothing
+Guiseppe Falzarano sorry I forgot to say that I already tried turning the wheel in the very beginning. It's the most well known way of getting the ignition to "unlock" and turn over. However, this was not that problem. I had been having problems with my key turning over for a couple months before it finally quit working completely. That's why I searched the internet for alternate ways to get the key to turn, and tried for over an hour to make it work. It would have been much easier to turn the key over and remove the bad ignition lock the standard way. It never worked, though, so I was forced to drill it out.
+Guiseppe Falzarano it is an extremely common problem with 2000-2003 ford focus. When it finally quits turning at all there is literally nothing you can do except drill it out. I've been pulling, pushing, twisting, turning, banging, and begging with my wife's ignition for the last 4 hours and it will not even pretend to budge.
@@mcedsonrunescape i noticed as i started this reply someone else is telling you the same, for had had recalls for years for this problem so it is a common problem. they just finally stopped, didn't get them all for sure just stopped spending money. im concerned about no programming , i thought these were reader key systems and had to be reprogrammed
Yah very true,i looked it up after i had smashed, drilled,swore,i found an old jigsaw blade stuck in there and now broken drill bits.I saw i learned and drilled out the pin,waalaaa!! out,now i start it with a gate hinge.!@Bercilak de hautdesert
@@koro287😂
Great video! I thought I messed up but then I saw you drilled out alot more in the key cylinder... i went for it and the lock pin popped out. After more drilling, I was able to get the key back in the cylinder so I could turn it... that did it! Thanks for your help!
I have a 2002 ford focus an I have the same problem as to the key will not turn until the key is hit a couple of times, this video was very helpful to my issue,thank you very much..prefix fix..
You went to low, you were supposed to go where as mentioned, although- the diagram was visually incorrect. It would have made that button fall out and you could pull the whole thing out.
This is true fact. If you drill too low, you will damage the outer part of the lock cylinder housing and possibly cause the cylinder to hand up where it damage has been done..
THANKS!!! Trial and error is the best way to learn, very helpful!
Nice. Have you used anything to strengthen it? I made a Cardboard machete on my other channnel. JGame87
Yeah don't pull that orange tip off. That's illegal.
First tsurugi
@MrNatedogg305 thats a recording of our 96" projector screen :D
what a beast!
@mcedsonrunescape I guess it was a wise investment for me to buy an upgraded JG full metal piston with bearing head.
Nice. Better quality would be appreciated it though.