Видео

I'm alive! Just working a ton more hours. When I started the channel, I was working from home, so I always had a few minutes to spare between meetings/lunch to film/edit videos. Now though, I work and in-person job, so I'm not always home like before - I'll try coming up with some more content here soon though 👍🏻

Hey, man! Happy to hear you're tackling this project! Feel free to DM me on IG if you have any install/worong questions! Also, the headlights are custom JewelEye headlights. There are a few retrofitting companies that can make a set for you. They are pricey though...

Omg you are ok tg dude, well im gonna do the install but the signal light you have i brought those too didnt know they where the same, i dont want the puddle light, just the drl and signal can i hook that straight to the turn signal wires ? Thats what i need answered and have you gotten the wire harness for sale yet i would buy that tomorrow i will make another account on IG i was suspended but ill make another to find you. Glad you ok buddy loved the video hope you post up more my friend

Fuses are never required to make something functional - they are a fail-safe measure. They are HIGHLY recommended on any accessory though. If a short occurs without a fuse, you will fry whatever accessory you installed as opposed to just having to replace a $0.50 fuse

You can certainly configure it that way using the door lock actuator wires at the door latch connector, but making it foldable using both the switch and lock/unlock will prove troublesome as you will now have 2 inputs for the folding motor.... will require a module to control both inputs accordingly.

@@ctmodularity90 I just want to say thank you for your 5 part series. It took me several weeks because one of my motors burned out. It turns out for my CSX I needed 5 amps as 3 amps kept killing my fuses. I too did modular and meticulously wired a measured section at a time with loom and also fed them through both door grommets which was a pain in the you know what. But now I have power folding mirrors on a press of a button and another mod to checkoff my list. Thanks again~ Cheers 👍👍👍

Hello! The one I purchased and installed are actually no longer available :/ - at least they were not last time I checked. I'll try searching again and post the link if I find them 👍

@@ctmodularity90 thanks!

The radio is a Chinese android head unit. There are tons of options on AliExpress/Alibaba

Hey there! I would refer you to my disassembly video - it's possible some bolts/screws may need to be tightened. If that's not the case, at least disassembling it will likely show you exactly what the issue is. Here is the link to my disassembly tutorial: ruclips.net/video/-yUo3-WHZvI/видео.html

I have Hyundai Genesis Brembo calipers on the front and rear of my CSX. There is a very good how-to conversion post on the 8thCivic forum

It comes standard that way on all CSXs (only sold in Canada). mine was imported to NC back in 2017. I have a plug and play kit for Civics to convert to digital in progress. I am just figuring out the last step, which is how to get the recirculation functions to work properly, as they are wired a bit differently on the US models.

I have already made a couple. Still figuring things out. It's pretty much plug and play with the exception of the turn signals, which has been done many many times 👍 There are DIYs on the turn signal portion on 8thCivic forum. I am creating an install instruction guide to go with the Plug and Play kit right now! Thanks for watching!

Sir where we can order your plug and switch harness you made? -from canada.

Hola, saludos desde Argentina, compre unos espejos de acura csx en ebay, ayer me puse a conectarlos pero tengo dudas con la ficha del interruptor de los espejos. Tenes un plano o unifilar por ahí? Muchas gracias

I gotchu! Still perfecting the Plug and Play kit, but I will have some to sell very soon!

Did you ever finish the plugnplay kit?

Shit I just saw this, do you or have you done that yet plug and play

Thanks! It's a custom CF one from a different Acura. I modified the wiring and resistances to make it work on my CSX!

Thank you very much! The head unit is an Android HU from AliExpress.. there are a few variants so searching 'Civic 8 android head unit" should yield the desired search results 👍

Yes, but not easily. You'd have to remove the turn signal assembly, open it up carefully, and then de-solder the old LED(s) and re-solder the desired color LED(s). I believe it is an SMD LED chip - unsure of the size. I can look into it, as I have multiple spare units. If I find a good way to do it, I'll see if I make a video about changing the LED color Thanks for watching, I appreciate the support 🙏

I just took one of my spare units apart, and the LEDs are actually DIP LED(s) - not SMD. They are replaceable, but taking the lens off is very difficult, as it is super-glued in all the way around (heat will not help much). The lens came off in 2 pieces for me (it broke). Thankfully, it's a spare, so no harm done 👍

Glad it was helpful for you! 👍🏻

Obrigado por assistir ao vídeo! Estas peças podem ser encontradas no AliExpress (Novo) ou eBay (OEM usado) de países estrangeiros (Taiwan, Malásia, Japão, etc...). A fiação customizada é necessária para a instalação. Obrigado!

Do the 8th Gen Civics in Brazil have the turn signals on the mirror? I am working on Plug and Play kits to sell

@@ctmodularity90did you ever come up with a pnp harness

Hey! I have an Acura CSX Type-S that I imported from Canada. It comes stock with the auto climate control. I'm working on making some sort of kit for the Civics, but it won't be completely plug and play

@@ctmodularity90 any updates on this?

@@Fifthcell Yes! I am in the testing phase right now. If all goes well, these kits will be PLUG AND PLAY and available in a few weeks (possibly end of the month). I have a prototype right now waiting for someone near me to let me use their vehicle as a tester.

Hey champion! Is there an update to the product?

Any update? Currently in process of doing it myself was thinking of making PNP kits

I'll be putting a kit together soon. It is pretty much impossible to make it completely plug and play, but it will be as simple as possible to install - some very minor work may be required though

I have mines installed completely but I had to Sacrifice going up and down with the mirrors show left and right it’s the only thing I can do and also is there anyway I can change the color of the lights to LED

@@Fd2Zay001your mirrors don’t power adjust up and down anymore?

You have to heat up the mirror glass to take the mirror assembly completely apart. I'll make a video on the complete disassembly this week for you 👍🏻

Thank you! 🙏🏻

The set I'm showing in this video is actually an aftermarket set I got off of AliExpress (total cost of mirrors (7PIN) = $150). Searching "FD Civic Power Folding Mirrors" in AliExpress should come up with the listing to purchase an aftermarket set. Alternatively, you could get used OEM sets for $200-$400 (depending on condition of the housings) on eBay 👍🏻

Do you have IG make it easier to reply to you sorry if I’m asking for to much

@@Fd2Zay001 Not at all! I'm here to answer questions 👍🏻 IG: CTModularity

If you're using the OEM folding switch (as shown in this video), refer to the beginning of this video. Power is run through the switch to the folding motor via the brown wire seen at 0:35

The BROWN wire in the door harness has continuity with the GREEN wire (which is one of the wires for the motor) we added to the door harness. The BLACK wire in the door harness has continuity with the BLUE wire (which is the other wire for the motor) we added the door harness. The BLUE and GREEN wires are from the custom intermediate harness shown in Part 2. The aforementioned continuity only exists when the switch is plugged in.

Thank you!

I appreciate it, brother!

@@ctmodularity90 Waiiiit a minute. Just how on Earth do you have an Acura CSX if you live in Maine!??!

I imported it in 2017 when I lived in NC. I moved to Maine in 2021 and brought it up with me

@@ctmodularity90 but how? It's nearly impossible to request something called 'A compliance letter' from honda headquarters. The only way you could get one was to literally ask the previous canadian owner to request it and send it over or something like that, no?