Видео

this one is an exhaust made for a 196 Honda clone it doesn't fit the mini diesels by default it has to be modified. the exhaust stud spacing on the diesel engine is closer together and uses a differently shaped port. so I enlarged the holes with a Dremmel and also reshaped the ports for proper flow. helpful hit if you need to bend the exhaust pipe and you don't have a dedicated pipe bender, go to your local hardware store and buy some play sand, fill the pipe all the way with play sand so you know how much you need, and then put that play sand in the oven at as high as your oven will go. once you have baked the sand so to say and it is nice and hot pour it in the exhaust pipe and that along with a heat gun/ torch will allow you to bend the exhaust without it kinking and restricting the flow. make sure to wear the proper protective equipment and be careful around hot equipment

@ravir.3012 they are off an 84 pontiac firebird trans am, I got them off ebay

how is a car that takes shots at the Corvette and more high class European cars like the 911 for a fraction of the cost lame? just shows you don't know your automotive history very well

Now that you mention it yeah it does💀 except the fiero predates both thoes cars by sevral years

true, but that is also not any worse than doing a clutch job on a manual trans car where the trans also has to come out

true there is no mistaking the sound of an old IDI diesel when it fires up. same with the old 5 cyl merc motors they sound so nostalgic

i just uploaded a vid where i show off the exhaust i have on my truck, check it out ruclips.net/user/shortsS-eaqFaooL8

I live in South Carolina its been 100+ degrees f every day the past week with 100% humidity I'm keeping my AC if i can possibly help it lol

You mean the Rubik's cube you have to disassemble before you Cirque du Solei into the motor just to find out your hands are too big to reach the final inch?

i didn't chose this life, it chose me because i got the "likes really old vehicles" autism

​@@pickles4412 shit at this point mid 2000s cars is just regular traffic because we're all broke

@@Wheagg true this joe biden econmy hitting eveyone like a sack of bricks

I'm just here thinking " that's not that bad" but I have been fixing cars almost 15 years now so I guess I'm kinda used to it 😅

modern diesels are significantly easier 💀the 6.5TA is not that annoying but when its squeezed into the tiny engine bay of the h1 its kind of a pain. most modern diesel trucks are designed to have the cab be easily removed for bigger repairs like injectors rockers EGR systems etc. worked in construction for a long time and i have a bit of experience working on just about everything, 2 stroke detroits, international motors, cats, cummins, off highway stuff mostly

you are right, Mine is a Cavilan-built hummer, not an ex-humvee. but I forget who makes them but there is a company, probably several companies, that make kits to add AC to ex hmmwv's I've seen them at car shows

That’s where you’re wrong. Some have ac

Worst year, my pickup truck would wax that T/A

wimpy motor sure big daddy GM didn't want anything to outshine the corvette, That's why this one is getting an ls4 swap so stay tuned👀 but the Fiero does have a frame. it has a space steal frame that the urethane and carbon composite body panels snap or bolt into. it was one of the first mass-produced cars to use this construction method. this method of construction is used by nearly all cars built today for weight savings and ease of replacement of damaged body panels. that space steal frame is also part of the reason why the Fiero is the only American car to my knowledge to have a 5-star crash safety rating without airbags

@@pickles4412 that's why it was a flop, I drive an all aluminum frame, body, suspension, engine, 2004 NSX, it's been up to 183 in 6th at 8000 rpm

@@BlakeH-mx5mm if you want to call nearly half a million units sold over 6 years a flop be my guest. that's more units sold than the first gen nsx and all gens of the MR2 combined while only being sold in the USA but ok bud.

@@BlakeH-mx5mm also you are one to talk the nsx was a flop not once but twice my dude 💀

so my h1 is not an ex-military truck 💀mine a civilian-built one. but there is a lot of weird stuff that needs to be fixed with these trucks military or civilian. for the biggest hummer-specific thing. blow the radiators out really good, the 45-degree angled cooling stack catches and holds a lot of debris like falling leaves and whatnot. also, helpful hint, when you go to an auto parts store do a vehicle search for a mid-90s GMC 3500 truck, idk what it is but if you search up an am general hummer in the auto parts store database a lot of parts that should fit don't come up.

The H1 is garbage.

not at all the intended use of the louvers placed that far forward to allow air that passes through the cooling stack to vent out the top of the hood instead of going back underneath the car and creating aerodynamic lift the next video i uploaded in my little series is a video explanation of this here ruclips.net/user/shortsOMTLbhAuUmA?si=FdQiolNa4V-2h9Uq

true, Derot Diesel always have some wacky engineering no matter what they are in

Airsoft Sniper Of SC thst meme is already stale

The 189th true but there hasn't been any good new ones since

Airsoft Sniper Of SC I'm going to thst one and operations dinnerplate on the 6th of January and most likely green

The 189th the only field I can go to is redfox and PBC. And redfox is no more so...

The 189th I'm gonna be at a private game on January 13th. Just me and a couple of friends. I don't have any big games planned for January.