Видео

Flying Death propeller for a hole cutter ... now thats what woodworking is all about, yeah!!

Excellent and smart

Thumbs down because you didn't really say anything about what you were doing. DUH How are we supposed to know what you're doing?

😄🤩😆 really smart 👏👏👏 thank you 🤝

Can we build flat frame, but head nozzle is adjustable using micro stepper motor, maybe only 200 or 300mm height

It is important to remember that holding stock flat with magnets or weights doesn't actually negate the fact that it's cupped in the first place. Once the item is cut or engraved and you take the bracing off, it's going to return to its curved state. There may be a minor reduction from releasing some surface tension or removing an area where the most severe deformation exists. But overall, you likely still have cupped or twisted stock. In general, I think there's some very good ideas here for holding and positioning work pieces, especially for repeat items.

You skip over the fastening of the PI to the spacer, the back to the matrix, also the screw link no longer works. I am unable to find m3 screws of length that goes through the entire case and am unsure if I'm literally supposed to glue the screws to the spacer.

FYI, the drawer has little clips on the side that allow it to easily be pulled out... One side you push down, the other you push up, as the rails are mirrored.

I loved your work and I want to do exactly like you, but I did not understand exactly because I did not see the laser machine connected to the box. Does the aluminum filter pull air to the outside or does the fan pull air from the outside to the inside?

I’m just thinking about how much better this video would be if you weren’t mute I’m sorry for you😢

Mele Kalikimaka first, My engineer came out in viewing, As I always tell my wife (50 years) this is just an observation not a criticism. The big chunks of metal will waste a lot of material and has big risks. I love your magnetic hold downs and pins, My observation here is to make them so they protrude above the material less then the space between the material and the laser head- that way if you make a cut error the only thing that you damage is a hold-down.

Why did you use the offset during the focus test? Is that the material thickness?

cool!

anyway, i can get the volt label file, so I can slap my logo on it easily?

where is everyone ordering the parts from? amazon? aliexpress?

Nice!! I’m gonna run with this to make a cooled smoke and noise eater box.

great video it must take along time to make

Awesome build and great video! Where did you source your belt for the Z axis? I'm having trouble sourcing a 3000mm belt loop... the ones I've found on Amazon all ship from China.

Great video with some useful suggestions. Thank you ☺

Great video!! -- one small question. what solution are you using in the sponges? I bought some with your link just now. Just wondering if it's water or something else. Also saw you using it on the Beer Caddy video. thanks millions!!

thanks so much - great and informative ideas you have!!!

love that cabinet i am just about to build the laser from further fabrication as well any chance you are willing to share the plans for the cabinet the link you made dosent allow you to download it 🙂

What's the size of the puleys you are using and what belt. Thanks

what is that blue film and where do you get it

Great Job

The image website ?

Why keep the the enclosure and the gantry apart? Wouldn't that make everything even more rigid and stable if you connected them together?

Hi Kitty! I love seeing Mr.M. So much tape!so many machine guts! I loved this just for the sounds. It’s like PCB mukbang

It's a great little oven

Have you tried making surface mount PCB's at home? Let me know below how it turned out!

Legend 🔥🔥🔥

Very interesting experiments. Thanks for sharing the ideas and the files. Although I fail to understand how the various spikes help with the bent board… I have seen someone screwing the metal spikes on a perforated metal plate to make a replacement of the expensive honeycomb, though. Personally, I just use duct tape to fix the board on a grid (one made to cool down baked pies). Not perfect, have to ensure I don't tape in the way of the laser, but kind of work.

how do you have your z axis setup? does it home when you power up the machine? want to part with your controller setup config's?

Can I use gt2 6mm belt for x and y? Because it is only available in my place!

great ideas dude. we all fight the same issues :)

A magnet enclosure is a great idea. Magnets are much more fragile than I realized, and now I have a bowl of broken magnets that I use. 😂

Thank you so much for this nice tests and the sharing on thingiverse. 😀

EXEPTIONEL

MAGNIFIQUE BRAVO

I'm strongly considering building one of these to house my K40 tube.

Do you have a steel plate under the honeycomb that the magnets are attracted too? Only ask because isn't the honeycomb aluminium?

Give me more ideas for my own DIY thank you. Was wondering you have any ideas about how one would winterize the window. It gets to -40 here in the winter and I just don’t see two thin sheets of plexi holding out the cold for long.

No

Thanks for the video. What size laser head did use? D12, D18 or D20

Great ideas. Im blown away. This is what I wat to see. People with a video like this he dont have to ask me to like and sub. I did it in first few minutes.

Is it really cheaper to build vs buy?

Dear you deserve a million Likes for this Helpful Video, Thanks.

Hast du zufällig das Slicen in Cura gemacht? Wenn ja, welche einstellungen hast du genommen für die Stützstruktur? Irgendwie will es bei mir nicht so recht.

Hey nice job! I have a couple of questions. I am making wine boxes of 4MM MDF and I am struggling with the glue. What king of glue do you use? Some boxes of mine went a bit unglued. I don’t know is is the right word. Sorry for my English And the second one, I saw that you are putting some nails on it? What number do you use?

There is no single or best avarage setting for the reverse scanning offset. You need to calibrate the offset for EVERY speed you intend to scan at. This is not a proportional scalling system, If you set an offset for 400mm/s it will not work for 399mm/s or 401mm/s because this is a simple lookup table system .