- Видео 35
- Просмотров 48 189
Diesel D
Добавлен 1 июн 2015
NoPros 22lr Christmas tree challenge!
@NoPro1962 Christmas tree challenge at 50 yards. Rifle is a factory CZ457 running an Athlon Midas tac scope. Ammo is SK long range.
December 25, 2024 🎄
December 25, 2024 🎄
Просмотров: 483
Видео
Henry Frontier 22lr with threaded barrel suppressed.
Просмотров 152День назад
Henry Frontier 22lr shooting suppressed at 250 yards.
Crossno 22lr liner at 100 yards
Просмотров 1,1 тыс.2 года назад
My Crossno insert in my Shiloh sharps 45/70 topped with a DZ arms 8x scope. Hitting the chicken silhouette at 100 yards.
Crossno 22lr liner for 45/70
Просмотров 3882 года назад
This is the Crossno liner for .45 caliber. Here I am installing it into my Shiloh sharps chambered in 45/70. I have put around 800 rounds through it and it is a hammer. Well worth the money especially if you want to be able to plink with your big gun and not waste ammo.
LPSD puller test hit
Просмотров 1303 года назад
Fully built D1105 kubota with turbo, built cub cadet rearend. All on a custom built frame. I have been working on this project over 2 years and getting closer to actually hooking it to a sled.
6.7 Cummins with s464 second gen swap on dyno
Просмотров 12 тыс.6 лет назад
Truck has EFI breakout with custom tunes, arp head studs, and a smedding 464 second gen swap. Stock injectors right now. It has a g56 6 speed transmission and dual disc clutch. Putting down 547hp and 1027ftlb torque.
Discing with a custom built Cub cadet 124
Просмотров 9 тыс.6 лет назад
This is my 100% custom built 124. It has a hydraulic 3 point lift and dual rear hydraulic ports to raise, lower and unfold the disc. The disc folds out to 8 feet wide and was built from the ground up. The tractor is 12hp manual transmission. It uses a GM power steering pump for the hydraulic pump.
Plowing with a Cub cadet 129 diesel
Просмотров 3,3 тыс.6 лет назад
Here is my custom built Cub 129 hydrostatic with a 2 cylinder Z482 Kubota diesel. Painted to look like a 1466 International tractor.
New Leslie RS3L runby
Просмотров 3787 лет назад
This is my buddy's new Leslie. Just doing some testing and it sounds sweet!
My homemade 1/4 scale Napoleon Cannon first shot
Просмотров 3,7 тыс.7 лет назад
I scratch built this cannon from White oak. I made all the little hooks and accessories. A local machine shop turned out the barrel for me.
Nathan airchime k5la and Bronze EMD bell
Просмотров 8607 лет назад
Nathan airchime k5la and Bronze EMD bell
Nathan airchime 1L 1 3A
Просмотров 7407 лет назад
This horn combo sounds like an M3. I think so anyways.
My new mixed cast P5 on a low mount and E-Bell
Просмотров 3457 лет назад
My new mixed cast P5 on a low mount and E-Bell
From P-pumed 24v to 12v swap first start
Просмотров 3708 лет назад
From P-pumed 24v to 12v swap first start
Nathan Airchime K5LA and steel EMD Bell
Просмотров 7448 лет назад
Nathan Airchime K5LA and steel EMD Bell
Nathan Airchime P5r24 and EMD steel bell runby
Просмотров 1,2 тыс.8 лет назад
Nathan Airchime P5r24 and EMD steel bell runby
Yadkin valley railroad Roaring River, NC
Просмотров 7678 лет назад
Yadkin valley railroad Roaring River, NC
Just got a 457 American in a wood stock. I put an Athlon Talos 4x12x40 with CZ rings on today. Also trying out a cheap CV Life bipod. Can't wait until range day. I chose a stock rifle because I want to see what I'm able to do without upgrades. Thanks for the video!
@@iam6345789 yessir those 457s are hard to beat. Mines stock except an Area 419 bolt knob and a trigger spring. It’s the 16.5 non match chamber barrel.
Super great shooting, man!! 👏 😊 I haven't had good luck with SK Long Range 😪 maybe I just keep getting bad lots? That was driving it home. Thanks for sharing!! 👍
That things a shooter! Sweet
Awesome D. Best Iv seen on this Target hopefully U go back at the Arctic Hunt Sun early eve deadline👀🫀🐏 you and that set up shootn Dead Nutz Bud! 🎯
@@NoPro1962 I will try the arctic hunt again!
Great Rip D! Nice set up I will put on board. Merry Christmas to you and your family🙏
@@NoPro1962 Merry Christmas and thanks for the cool challenge!
Carfanning 😭
That's super cool I love it.
Sounds almost like a P-3
It does
what clutch?
Zach kerber 5 pick dual disc.
@@dieseld5129 would you recommend it over Vogels spline setup? or have you never used it?
What motor you got on it
Z482 kubota
@@dieseld5129 how much do they cost i wanna diesel swap my 129
@@outdoorlife7146 they very in price. Hard to say and just depends on if you can find one. Mine came off an APU on a big truck. I paid $100 for it
@@dieseld5129 ahh thx for the help
What did the truck make hp wise in this video?
What'd you use to fold the wings and raise/lower the disk?
Hydraulic cylinders, used a power steering pump driven by the engine and had valves under the seat and remotes on the back like a big tractor.
@@dieseld5129 cool! I'm wanting to build a loader on a 1250 but don't know what to use for a pump. The engine is a v twin command.
@@kylekenan2321 find a power steering pump from a car, get a tank and plumb it to a valve and it will work great. Just make a bracket to mount it so you can run it off the pto pulley
Its nice to see well made self made cannon. Tired of drilled out bolts, and pieces of axle stubs called cannon. You’ve built a nice little gun.
Thank you, I appreciate it.
What motor
D1105 3 cylinder kubota
@@dieseld5129 thanks
I shot the 8717 not too long before they retired it, I always thought it had one of the best K5LAs I've ever heard.
That’s awesome man, it needed attention to the #5 when I got it but got that straightened out and it sounded awesome!
NS 4176 Has the exact same tuning
Would you restore a international 1086
I don't have a place big enough for that big of a tractor, but that would be a nice one.
Well I have one I was looking to restore it
What clutch do you have on there? How are the egts? I want to get rid of my vgt. Go easy on her, I don’t think the G56 can handle that much power!!!
It had a dual disc, it was in it when we got the truck. We are putting a built auto with full manual valve body now. Sorta making a streetable race truck. And eggs were like 1600
Any updates on the auto? Thinking about ditching the g56 for a 48re on my 6.7
@@joshhawkins5696 I have a few videos of this truck of how it is currently on my channel. He’s put a revmax in and it’s lost 2nd gear band twice now in less then 2000 miles and they wouldn’t warranty anything.
@@joshhawkins5696 ruclips.net/user/shorts81jGCo_EXmg?feature=share
You able to recall the serial number on this? I assume it’s an early 90s square tag.
I can't remember, and I can't find the picture I had of the tag. It was a pretty nice horn.
Diesel D For sure! NS is cutting some Dash 8.5s at a local scrap dealer and some have their original 90s K5s. Hoping to save one.
@@CentralIllinoisRailfan that would be great to get one, need to get the number boards also.
Nice! Would you say a m3 is louder than a k3?
Depends on how if the m horn is tuned good and if the k3 is American or Canadian. American k horns are louder than Canadian ones.
@@dieseld5129ummm.. bc rail and rail link k5la’s and k5h and l’s are damn loud
Freakin nice build
Late to the party. I would be interested in what rims and tires on that 124.
The tires were 26" tall on custom built rims made from old truck rims.
How much did the tractor sell for
6k, it went to a guy in Iowa.
Jeez dude, where'd that go ?! Lol
I need to make another video of the cannon. I finished the limber that goes with it too.
Is that disc homemade, do you have any plans for the disc while building it
It is homemade but I do not have any plans.
bravo , sweet rig you got .
What u went from a p24v to a 12v?!? How come?
Melted a piston in the 24v 😂
This is so dumb because one truck probably has a different gear ratio then the other
It was just for fun, we had nothing better to do.
Omg! This is frickin awesome! Please share more
I have since sold this little tractor. But I have some videos I need to upload of my other tractors. Thanks for the comments!
I have seen this build all over the internet...
Can you do a walk around of this tractor and show how you did the repower?
I will try make a video of that.
It seems pretty quiet.
Will O. Driving down the road in a Cummins and low quality video makes it sound way off
Diesel D okay.
That would be a K3LLA/K3HLA
M e t r a
Y e s m e t r a
That guy had to be confused lol
Yea 😂
How did you do your engine mounts?
Derrick Schupbach 2 pieces of 1/8" plate with a piece of 1"x1" square tube as a spacer to take up the room between the block and frame. You can see the two bolts in the side of the frame.
Ok if you get a chance to do a walk around video of it, that would be cool thanks
Cummins power!!!
Nice!
were are you located? I have a few horns and a bell.
I live in Madison which is above greensboro. Ive got about 6 horns and a few bells. But i do have air on my truck and get out an play for time to time.
+N&W F150 from
I'm in union Grove. we are a few hours apart, check out my other videos! I have air on my car and my truck.
+Diesel D We outta get together and make some noise.
+N&W F150 we can man! let me know!
Nice video. Im a horn collector myself and judging by the railroad we aren't that far apart. Maybe we can meet up one day.
Amazing!!!
Awesome horn!
71mm turbo, (I'm try in to sell) 191dvs, AFC live from power driven diesel and a set of their custom p-pump 24v 150hp injectors, 21* timing, fass 150, .084 lines, Valair 650hp dual disk, think that's it. I plan to dyno it after I get a different turbo setup!
What's it have done to it?