Видео

@mehdi.bphotography9740 hi mate I would try use the seal pick I was using around the channel to try and get the worst off have a hoover as well so they will go into that. Then use some wash and wax diluted into a spray bottle. Or whatever you wash the car with. If it is really bad that chrome trim can come off. If you use a wide paint scraper and put it in between the paint and the bottom of the strip and bang it with the palm of your hand it will pop off. Don't use a hammer as you will damage the trim. When your finished use some silicone spray or white lithium grease down the channel it will free it up a treat. Hopefully this helps. Thanks for watching

@@SALTANDSUGAR-c7 thanks mate and thanks for watching

@japautosalon oh nothing worse mate. Hopefully it is just them plastic clips. They do break quite easily or you could be really lucky and it's just the screws loosened. I would suggest a little slip of rubber like a bicycle inner tube between the glass and the plastic clip just for extra grip. Thanks for watching

@SimpsonsClassics thanks mate slowly working up to the quarter panel it's till so daunting even though I did one on the 87

@@SimpsonsClassics thanks for watching

@velmathemini exact same to do mate. Take your time if it's just pads you should have them out and in in 15 mins. Just don't forget to take the cap off the master cylinder

@@velmathemini thanks for watching

There not bad. I'm usually not a fan but the only thing I could fault with driving is the 500 dings and bongs whe. You start it. I'd drove quite nice and the seats were quite comfortable. Still wouldn't buy one 😂😂😂

@RichieRouge206 thanks for watching mate

I'm not sure the brand. I need to get new ones though. Thanks for watching mate

@RichieRouge206 all good mate it was a month or 2 back

@velmathemini I wouldn't usually use a drill when tapping something but it was the quickest way and they were been welded at the back as well. Yeah heritage anything isn't cheap. Thanks for watching mate

It's helping the morris as well 😂 can't beat decent steel. Thanks for watching mate

It is a labour of love I have to admit Thanks for watching

The next episode we will button up the rear arch and have it in paint and move on. Work starts tomorrow. Thanks for watching

I remember that it was like white noise in the video mate. Thanks for watching

@velmathemini it's that time of the year again it's needed. I'd love to get it on next. But I've to work on the morris next.

I wish I'd kept it in the shed at the end 😂

I should have had the barn find fleece on for it 😂😂😂

Wait until you see when I'm finished with it 😂 you can use it in your what not to do in repairs 😂😂

@@RichieRouge206 it really is so rewarding. The key to a good spray job is prep. The spray job goes down south fast without it

@@RichieRouge206 I really want to film this again properly. It was the last video with my old phone. All shakey and bad audio

@RichieRouge206 getting there slowly mate. The workshop is starting to annoy me a bit but I have to remember I could be working outside. Take the rough with the s Smooth. Thanks for watching

@@velmathemini I know the stuff you are on about. I think I may get a bottle of it for the winter months. Although there is always a heat gun 😂 thanks for watching mate

@MiniDaly87 heat guns are magical things 😁

@pjcurran1717 thank you so much for your comment and feedback I'll be showing more fabrication work in the new year with it. And will also do slightly more detail in them as I go along. I really can't cover everything but I'll try and film as much as I can

@@Busterbrady-zw3yd thanks buster

@RichieRouge206 thanks man it really means alot to me. I was thinking it was 80s alright or early 90s with the 375 engine in it

@Conor.Twomey definitely not an ideal time to be at it. I think I did 3 in total waiting for the primer fo dry and tidying etc. Great to hear you have the floor repair panel tacked in. Any progress is progress. Thanks for watching

No problem at all mate. It was bloody freezing in there today and I've lost my hat 😂 I have a video of me removing it. I'm really hoping it goes back on as easy. Thanks for watching mate

@MiniDaly87 those hats are so warm. I've been using mine the last couple of weeks.

I probably should have but for the purposes of the video I just took the worst out as I was planning on shampooing it afterword. I have a few autoglym products the super resin Polish and the glass cleaner both don't dissapoint. Thanks for watching 👍

Thank you for watching. The wireless mics need an otg connection on the phone I learned that when the first time I bought them the phone I had didn't have one. The phone basically sends power back down the charging port to power the unit. The gimble is really good when it comes to filming

@velmathemini I thought the same even the sound is better. The one on the tripod is a note 10+ the one in the gimble is an a33

@MiniDaly87 yeah the a33 is a big difference

@@velmathemini thanks mate good to get an opinion from a viewer 😀

@RichieRouge206 I may give it a go I used to use pink stuff on the dash but it smelled after a bit. Thanks for watching man !!

@RichieRouge206 I want to bring a nod to the past with the car with them. I had a set in my first car and they came up on a local free cycle page brand new I nearly broke my phone trying to put in for them. The sub and amp is from my first car so it's a bit of history in it

@RichieRouge206 I'm a vw man through and through love them. My daily is a b6 passat. Your more a sweedish lover 😂

@@velmathemini it's a shame that it was filmed with my old phone. It really didn't do it justice

@MiniDaly87 looked like a long drive. Shame you can't go back again & film with your new camera.

Technically it did fire 😂 thanks for watching

@ No problem mate, just keep entertaining us. Thanks.

@@SimpsonsClassics no I definitely have my heating sorted for winter 😂 I was so annoyed after it was so close to firing. Might do a part 2 after I sort the gaskets out

Thanks for watching Cody

@@mcalvert39 you love your fire 😂 at least I got it early and didn't panic

@pjcurran1717 thank you pj there will be plenty more videos like this coming. Thanks for watching

@@dannyhanley8927 it went south fast 😂

@velmathemini I bought a fire extinguisher straight after that no more messing around. Yeah i noticed that in the video. I had to cut a good chunk out. This isn't a builders channel 😂 the engine is from the 87 parked behind the mpi. Thanks for watching mate

@MiniDaly87 I think we all should buy a fire extinguisher. Did you get a water or powder?

@velmathemini I bought a powder one I'll send you a pic of it on insta mate. It might be messy when it goes off but if rather clean that up rather than a burnt car \ workshop

@MiniDaly87 just seen. Yeah the powder one goes everywhere. I've seen someone use one at work. Better to be safe than sorry though 👍

It was all good fun mate. Sure what else would we be doing

It's a clip that slides down the side it's not really used being honest. I've changed the glass 6 months ago and it hasn't fallen out yet. It's fiddly to line up when you do fit it