![A Rednecks Garage](/img/default-banner.jpg)
- Видео 74
- Просмотров 74 230
A Rednecks Garage
Добавлен 13 ноя 2007
scrap oxygen acetylene torch setup
I've been wanting a oxygen acetylene torch setup for a while I wound up getting the tanks a few weeks ago and with this last bit of scrap I took in I was able to buy the gauges torch and all that set up so I took this old hand truck I've been saving for this exact use and finally built me the cart and put everything together then tried it out It's been 15-ish years since I last used a cutting torch so I had to relearn a thing or two by the end I got familiar with it
Просмотров: 924
Видео
face tracking camera and unboxing a new old monitor
Просмотров 1314 дней назад
today I finally unboxed that old new Dell computer monitor and surprisingly it works that went so quickly and uneventually I decided to review my face tracking camera mount thing It's pretty neat I'll end up using it as time goes on for a few things
Saturdays are for trees and cleaning
Просмотров 209Месяц назад
help with pulling down a tree first thing in the morning then going back home to clean the garage
5/18/24 scrap day
Просмотров 686Месяц назад
5/18/24 scrap day 6000lbs at .05 using the big trailer that i upgraded with Carter axles form @trailerpartsunlimited
tow smart adjustable hitch
Просмотров 121Месяц назад
unboxing and first impressions of the tow smart X mount adjustable dual ball class V hitch rated for 10k and 14k
big trailer parts came in
Просмотров 303 месяца назад
some of the stuff that i ordered has showed up just waiting on the rest now
cleaning, firewood, and a stuck truck
Просмотров 1,3 тыс.5 месяцев назад
cleaning, firewood, and a stuck truck
badlands winch pulling down a limb #shorts
Просмотров 9Год назад
badlands winch pulling down a limb #shorts
old whites mower gets a John Deere snow plow
Просмотров 155Год назад
old whites mower gets a John Deere snow plow
71 year old man here. I took a welding class at a local community college after I retired. The main thing I learned was that I need a lot of practice to ever get good at welding. Lots of fun though. Good video.
Acet @ 4-5psi and OXY @40psi. Slow down and allow the preheat to do it's thing. If you need more heat open the Acet knob and adjust the OXY knob to get back to a neutral flame while your torch is still burning, you won't need to adjust the regulators unless your PSI starts to dip. Good job on the cart BTW.
whats the cost of the package
The tanks I bought off Facebook marketplace I found a gentleman that buys old tanks and he will get them to send off to be pressure tested cleaned and field and he sells them at a very reasonable price The two tanks you see there I paid $250 for their owner takes I can exchange them anywhere I can want The torch set hoses gauges all that outfit was 260 I think I got it from tractor supply it's the Hobart medium duty set It comes with everything you need the wrench nozzle cleaners stuff like that I suppose everything else you see the hand dolly and the toolbox I welded up on the top all that stuff I have accumulated from scrapping in the video you see there I had the original tires on the dolly and they wound up popping shortly after just with it so old and I switched them out for a lawn mower wheels the small plastic ones and they work just fine
I hope you make your dreams
What do you think about the hitch after towing? IF you replaced the "U" shaped pin will you link where you found the replacement? TY
It's been enjoyable I've liked it It's saved me a lot of time from switching from different receivers or this without or the other quite a few times I find myself backed up underneath the trailer ready to go and whoops I have the wrong ball so it's as simple as just flipping it over so it's taking a lot of headache out as further you shape pen it's okay I will use it till I lose it I guess I mean you can put a couple regular hitch pens in there either or did I really like it nah would I rather have regular hitch pins sure but is there a problem with it no not really The only problem I could actually see and it don't affect me too much because where I live I'm pretty comfortable with all my neighbors but if you live someplace with a lot that is or you knew someone was going to screw with it I would definitely switch over to locking pins but that's it I mean I I used it I use it almost every day at least every weekend sometimes switching back and forth a couple times through the weekend and it's made a better experience Rather than switching the whole hitch out or trying to change balls on the one hitch would I suggest that absolutely Is it as good as BMW or a bulletproof I don't know I don't own those but it can pull 10,000 lb down the road just fine
You don’t have enough heat. Turn up the acetylene & oxygen knobs and always cut on a little angle into your burn.
I figured that out towards the end you see me go off camera I bumped everything up a little the metal was thin and I was trying get the feeling of it again 2008 was probably the last time I used a cutting torch
Sorry for your adhd, you'll hyperfocus and figure it out once everything is clean.
Once it's all clean that's like the best feeling ever but then I don't want do nothing because I don't want to make a mess but then I get a call to haul a little scrap in so then it makes the grudge messy again so I have motivation to do something because I don't care if it gets messy again but I can't do nothing because it's a mess is a vicious cycle lol
I've had the exact same problem do you have a little bit of money where you could hire a young kid to help out for a little bit it's a motivating factor. It's a win-win the kid makes a few dollars and learns some skills and you get the satisfaction of getting all your projects done and your shop cleaned up and who knows you might make a friend out of it.
Usually my son will come out and help and keep me company or my dad will stop by when he's taking the dog for a walk My best friend has ADHD also and unfortunately we both work very hectic schedules right now but we used to body double he'd come over here we'd knock out a bunch of chores and we go to his place The next weekend and knock a bunch of stuff out with that for a long time but I've just been so busy last couple weeks everything has accumulated lol
That guy's usually me but I work way too much ot lol
Lay off the meth bro
Holy hole in a doughnut! Way to go for free gas! Now you can sleep in the back seat tonight. Lol
I am sorry, but you will never be able to help an operator the way an operator helps you.❤
🤷🏻♂️What did you think!? It's called get your ass out of my scrap unloading yard and don't come back until you have gloves hard hat safety glasses on and by the way it feels so good when it quits hurting your fired!🥳🍻🍻🍻💯👍🏻✌🏻🇺🇲
Stand back ya clown
Stay out of the line of fire my boy!
This why workman's comp is so expensive
Never mind, I’ll unload it. 😊🙏🏼
When you get out and literally stand next to the trailer smfh 🤦🏽 say thanks to Jesus for the reminder you ain't invincible 😅
Dummy, get back!
Dumba** for being near the work area.
Check your email. Kaleb Carter sent you a email sir
Honestly when I seen this comment first I thought it was a spam post until I put the clues together I will reply to that email in a sometime fashion I promise lol
What is that edit
ayoo first view haha
Nice find for free. Those old craftsman pull 15 amps and would dim the lights noticeably in my garage. I couldn’t run anything else while it was running or pop. 😂
time to have shiny fan blades lol
Time to strip sand prime and paint
Just gonna have to spray paint over it
Plastic paint tend to do that, it just has to be a microscopic imperfection that water can get into. It is terrible for people who paint their house where I live, because when it is water beneath the cracks and the temperature drops below freezing the cracks expand, then it might thaw and rain and freeze again and the paint just flakes of their houses..
Truthfully I never thought the paint would come off like that so that was a surprise to me like I said In the video the most annoying part was that the grease was still on it
I get excited over things like that too. I can afford anything i want or need but... Cool. Its not wasted.
GRRR
grrr
Why are the childrens tents next to this dangerous tree?
good question me and my buddy spent the night before down there. we burned a large brush pile and wanted to just hang out and they are small because i am very short and i fit in it just fine so i have never need to buy a bigger one
Please remember to move after cutting a killer
i should have, one day i will learn the hard way
That tree was dangerous nice job taking that down.
It's never worked out when I've tried using what I don't got.🤣🤣
I could slide that block up on some cardboard or a piece of plywood.
Well looks like your going to smash the appliance in front of the block!
If you thought that was bad you should of seen what the claw did to it when it got unloaded
Don't pick on him he only has one arm.😢
Need another pulley each pulley doubles the force if you had 4 pulleys aligned😅 right you could do it by hand
That is true I do have more but didn't need for this
Bahahaha!!😂
# Friggin Junk
I have the exact same bike 😂
Nevermind, its simillar, mine has no clutch
Boing
grr
Just 1 thing, clock that exhaust 90 degrees so you can breathe
I plan on it its not welded in yet just mocked up
@@arednecksgarage I got ya
Bet he’s a volunteer fire fighter ….
that I am
1st, GRRR and a AHRRG
Hi, Have you found parts for this bike? I have a Xiongtai looking to purchase bits
+ElCabo Vasquez nope i have not not for that exact bike but they all are the same really what you find on ebay is probably going to work and other parts and things i have just make myself new bolts tap new threads got to work with them a little but but i could not kill it i traded it off but hoping to get it back in a couple weeks and work on it more lol they are so cheep to work on and brake but heck a whole engine is like 300ish off ebay so cheep and a lot of fun hope u like yours and i would love to see some vids
+zip25265 ok well so far everything except the exhaust has been relatively easy. I can't seem to find like an fmf exhaust all I get from ebay is the cheape generic ones. I have a nibbi carburetor w/upgraded filter also have a cdi box with upgraded spark plug supposed to respond a little better but again having issues finding an exhaust for it online that's why I was wondering if tou have purchase or searched for parts.
12-19-09