Видео

It worked bud. Thank you very much. I striped him and cleaned it and it that didn’t work. Then found your vid and tried that. I did you a polishing pad on a drill and I already had the same polish. Perfect. Top man, he’s as his full speed and seeing things again.

Thankyou. You are a champion.

Thank you for the video. I used regular white toothpaste. It took a while.

MAN GENIUS!!!!!!!!!!! THX SO MUCH!!! CHEERS FROM BRAZIL

Hold the button on the top down for 10 seconds to reset it. Do it until you hear three beeps. It might get rid of that wobble, as it did mine.

If mine would do that I wouldn't even complain. Mine wants to beat itself against the same spot repeatedly.

Thanks for your information

I'm surprised it doesn't stall on that dark carpet. Mine triggers the drop sensor

My deebot , when it runs like 10s than eror. Any idea please 🙏 . But if we click home it goes to home straight and not eror

*I run the m6 daily, and my floors look awesome🌼 **allabout.wiki/Roborock-Robotic** I wet mop 2 days and dry sweep the rest of the days. When I first got it, I used the included disposable pads. I didn't like them--the dry pad has no depth so if it picks up a chunk of something, like dry cat food, then it pushes it around or drags it around the floor. The wet pad wasn't very absorbent so left streaks and wheel marks.*

Maybe apply some clear packing tape, then just replace it once in awhile?

I watched my Deebot get dumber and dumber until he just smashed into things. Thanks for the video! I put a little olive oil on a paper towel, rubbed it in and Lazlo works great again!

I was so tired of coming home and immediately vacuuming up the endless tumbleweeds of dog fur floating around my apartment🌼 Decided to give this task to a robot aka this Roomba and WOW. I’ve been a peasant for years, vacuuming my own floor and what not. It works great (doesn’t leave anything behind, works on schedule) and now I can come home without tufts of fur existing on every floor surface. 10/10 just buy it, it’s worth it.

I wish I found this video two years ago. Gonna go try this on my seeemingly-blind Deebot 900. Thank you.

Thank you very much for putting this idea forward but unfortunately it didn't work with my Deebot M80 Pro (two year old). I buffed it with PlastX using a Dremmel with a felt tip and it still bumps into everything. I tried vegetable oil and it didn't work. I reset the Deebot. Still bumps into walls.I finally resigned myself that the problem might be with the anti-collision function itself. Every commands using the remote still works so I suspect the infrared is getting to the unit correctly. Maybe a weld on the motherboard was substandard and it went bad after getting hit many times. I resigned myself to add a soft cushion bar to the top of the bumper to absorb some of the energy of the collisions to reduce further damage to the vacuum. I'll be using the left over PastX on the cars headlights.

Thank you for making this video. Worked great to correct the problem for me as well. I also added some foam tape along the bottom and top edges all the way around the machine to try to prevent damage when it does bump something.

srsly got board with the BLAH BLAH blah blabh BLah BLAH BLAH at the beginning of the video and stopped watching :/

I just cleaned mine up with a wet hand paper tower and it works great now. Thank you.

Thanks! I used meguiars cleaner wax and then an auto glass cleaner for good measure. Works great again. I feel so dumb for not thinking of this sooner. I wiped it before but never actually used any product.duh

I didnt have any of the plastic restoration liquid and so after cleaning the front bars with mild soap and water and let it dry, I then placed some clear (thick) packing tape and covered the black sensor bar with it, trimming the top half so that it’s not noticeable. It worked!!! I would probably have to replace the tape every now and then. Its much cheaper than replacing the whole robot!

Looks like toothpaste...

Holy shit, this actually fixed it! Thank you! I tried the Plastx compound by hand and made no progress because the scratches were pretty severe. If anyone runs into this issue, use a Dremel with a felt buffing bit and Plastx smeared over the plastic. I ran it around 4k RPM with very light pressure, making both horizontal and vertical passes. It took about 15 minutes to get it clear. IMPORTANT NOTE: WEAR EYE PROTECTION! It flings the compound all over the place and getting a petroleum based abrasive compound in your eye would be a nightmare.

Thank you for this! Will give it a try and see if it works for me :)

OMG! If it wasn't for you it would be a hopeless cause!

THANK YOU !!! I had the same problem and all fixed now with the polish !!! GREAT !!

After you've buffed it, put some clear packaging tape over it. Replace tape after 2-3 months.

Thank you! Im going to try this, just ordered the stuff you recommended. I thought this was probably the problem, and used toothpaste like you do on music CDs, but it didn't even touch the scratches and scuffs. Hopefully this works!

I *think* this really helped a 2 beep issue mine was having and if not it's a little more clean now. Thanks for putting in the effort to help out the rest of the world.

Thank you for sharing!!

thank you very much,situation has really improoved,if there was a way to replace that plastic part with glass it would be perfect.ty again.

Hi I too have a deeboo to 900 it always says “ pls check the driving wheels “ in spite of the clean wheels Any suggestions pls

mine quit picking up all of a sudden

It works good for me thank you

Dan, Please help. I just bought the 900 series and it doesn’t want to clean a dark multi-colored area rug. Not a thick pile. Any suggestions?

Also try using compressed air to blow away the dust behind the bumper. I used a can of compressed air and the solution described here and my Roomba is now behaving itself perfectly.

This worked great for my eufy. Thank you very much.

Yep, it works. Thanks!

Was sent here by Ecovacs, about to try this on my moms Deebot that we got her for mothers day. Hoping it does the trick!

You made my day :-)

Before going to the store for Meguiar's I checked to see what was in my car care cabinet. I had some Scratch Doctor Clear Coat Scratch Remover. Just as the Meguiar's did the Scratch Doctor worked to restore the DeeBot Infrared vision.

This worked like a charm. Thanks!

I didn't know it was supposed to dodge everything! lmao Thanks!!!!

Hello Guys, if you don’t have any wax or anything try using vegetable oil or olive oil. Anything oily will work. I just tried it on my Deebot and it started working as well:)

I’m really impressed that you came up with this solution. Thank you so much for taking the time to share it. Worked exactly as advertised with ours!

thank you !!

It works with my Ecovacs, however the fix does not last long... midway through the cleaning it starts bumping into everything again. Worth a shot though.

This is awesome! Our deebot isnt smashing into anything anymore!

This was so simple! Fixed in 2 minutes. I actually had taken apart the bumper to clean it from inside - without success. But polishing did the trick. Thanks!

I went through 4 replacements they all did it after 2 weeks. Gave up and got irobot. Its a bad design. Its the wrong type of plastic and the sensors ate not powerful enough to go through dirty plastic. The irobot i bought doesn't have this problem.

Very good fix!