Видео

Sete minuto de abobora mas o tatu nao saiu da toca

It does not work, because you are using wood , if you use Aluminium discs then it should work , I also made one form pvc so it didn’t work , let you try Aluminium hope it will work,

It does not work, because you are using wood , if you use Aluminium discs then it should work , I also made one form pvc so it didn’t work , let you try Aluminium hope it will work,

You take help of charger and tell them. They will help you and rectify the problem of shaking.

In your project you will have to take help of flywheel which itself generate torque and allow your project be successful.

Dear you do not be disappointed. In your project there is some kamine which require little fine tuning. I am also trying this project. The placement of magnets is to be changed. It requires principle of Halbach Array in which the magnets are to be placed at 0 to 90° then next to be put at 90 to 180° and next magnet to be placed at 180° to 270° and so on in the same fashion in next row. If you want to be successful you may write to me. Thank you for sharing. Do not be lose hearted, God will help you. I observe that your magnets are placed deep enough. So try to arrange in Halbach Array.

You would have shield the magnets to direct the field to the right flow. Also the angulation between your rotors and stators, it seems, are not 'closing a cycle'. You need the last rotor to have same angular distance from the first one so the sistem will be in equilibrium.

Sell this to me, I make it work in 5 minutes , you don't know the golden trick

สู้ๆนะครับต้องมีช่องทางนำพลังฟรีๆของมันออกมาใช้ให้ได้จะไม่เกินฝันนะครับ

อันนี้ต้องหมุนครับหากใส่แม่เห็กถูกทางสรูทรมันใช้แล้ว

ออกแบบได้สวยแต่มันจะไม่แรงนะจะไม่สามารถเอามาใส่รถมอเตอร์ไซด์ก็จะยังไม่แรงนะครับออกแบบเปิดทางแม่เหล็กยังไม่ถูกพลังงานจะถูกตรึงอยู่ส่วนหนึ่งนะท่าทร่างออกทำนองนี้จะยังไม่ผ่านครับแต่ท่านออกแบบได้สวยครับคอยมาซื้อที่ไทยไปถอดดูข้างในนะว่าผมประกอบวิทีใหนทำไมมันถึงแรงและหมุนได้เร็วยังขอสงวนไว้อยู่นะครับขออะพัย

วิจัยหาช่องทางทร่างออกมาเถิอะครับโลกเรานะร้อนมากแล้วแม้ว่าพลังยังไม่แรงแต่เราก็นช้องทางของพลังงานอันบริสุทธิแล้วนะครับสักวันเราจะได้พลังแบบไม่ต้องเติมน้ำมันหรือื่นๆก็ได้นะชอบครับ

Energy always has an origin. People have to stop believing that there is such a thing as a free lunch.

Since 15 years, I have been dealing with angular energy electricity generation systems (R&D). My positive designs related to angular energy continue. In this regard, my own financial means are insufficient, I had meetings with many businessmen, they accepted the financing of the project, but they gave up when it came to signing a protocol, that is, when it came to formalisation. If there is an entrepreneur who will walk with me on this path, who is idealistic, has financial means and wants to make an official protocol, I would like to meet.

its an amazing build credit where its due and full well deserved thankyou

Hello for rotor your magnets are ok. But for stator you must use magnets North sud on thé sale face. Half, half. And it will bé good...😉

Muy bien me gusta

Thr problem is insulation ? Superglue is extremely powerful insulator, if the whole thing is shaking u need to secure the whole structure down, bolts, hot glue, whatever , u willl need huge amount of securing down for this device

Looking at it I can't imagine how many hours you spent assembling and disassembling repeatedly just to show people how it's done my respect, sir!

Das Ding ist scheisse....... Was hast du für Drogen genommen????

Perendev went to jail for investor fraud. So you're copying him?

5 Jahre Gefängnis: de.wikipedia.org/wiki/Magnetmotor

DA LI IMA DA SE PORUČI OVAKAV MAGNET MOTOR ZA SKLAPANJE I KOLIKO BI KOŠTAO. JA SAM IZ SRBIJU.

you're missing the magnetic shielding around each magnet

Try to use big magnates for Starter and fit the rooter magnates little deeper. Don't give up. You are near to success. May God helps you.....

Try this one from Brazil: ruclips.net/video/OsD873nj2xA/видео.html

Thank you for a great video sir!

هل ممكن قياسات المحرك

You are a good man.!! Keep working your ideas!! John Markidis from Greece.

Magnet motors do work, but you just have to know how to shield off the contra forces of the magnets. Also you can use magnets in combination with coils and electronically eliminate the contra emf.

I can see you have made several design mistakes.

Blindage magnétique avec nickel

Essa porcaria nein funciona pra que mostrar há me poupe

FIRST YOU NEED BAR MAGNETS and you need to put magnetic shielding( iron, mu-metal) on one half of each pole so it can move in only one direction, magnets have to be close enough to each other

Description complet project, please.

Don't throw it out. Even if it doesn't work, it's still a work of art.

thank you for trying and thank you for the honest opinion just out of curiosity have you tried staggering the stator magnets like the rotor magnets are?

Vidio yang ini kebanyakan bicara

Glad you tell the truth. This was my original invention... which was stolen from my shop many years ago... then a few months later showed up on RUclips. Then all over RUclips. It was never intended to go online. But some people just couldn't resist to steal my ideas. I'm glad you did this to show people that just because you have an idea, doesn't mean it will work. Especially with magnets. The problem with RUclips is that people want to Monetize their web pages... so they put up crap on their site and fake it. Which is wrong. I am happy you told the truth in this instance. I am vindicated finally... because I never intended that my ideas be exploited like it has been by stupid people and fools who just want to make a buck.

It is good to convert it to hydro Powe r

How much did they pay you to say this?

give answer to my question

Mr give answer why you can tune it on lier such as I dian film which put his leg on earth all cars go on sky

no traduce al castellano, no lo hace funcionar no se conoce potencia , , es una lastima los detalles que se desconocen

oh man, your english is so fucking bad that my ears get cancer from your voice. Its very hard to understand what you mean.

Thank you sir for your research and efforts..

Translation: I have wasted 10 years of my life

Trabajando y sin trucos

A big problem in your job is distance of internal and external magnets!! Of course it can not be rotated by that big distances! This is all people problem. In other hand, there is not any Free energy and magnetic strength (power) of magnets will be reduced during time because of losses and heat generation. Part of energy has to be consumed to keep magnets cool!

Haha it failed