Видео

Do you know what kind of leather it is? We would probably recommend our product LeatherCoat for this usage

You should use a dedicated leather cleaner that doesn't contain any conditioners or softeners. We recommend our Leather Cleaner Natural for this specific application.

You can use just garden hose and yield successful results. The only benefit of pressure is the ability to spread the product easily and quickly. Just ensure that you have rinsed it all off after and the lower pressure shouldn't be a problem!

It does not. You just need to be cautious that the seats are completely dry before applying it since the holes can trap the cleaner that you are using.

@ Thanks for the reply. I’ve had some persons in my region state car dealers advised them against leather coatings on those heated/ventilated seats. I couldn’t find any exact answer online, thanks again.

@@iJoker88 They might be referring to other types of protectants that tend to be more thick. Which can clog up the holes if improperly applied

Great question. You should get 12-18 months from this coating. If you notice that the ceramic characteristics are depleting in that range, I recommend applying our product Total Remover, then reapplying the coating. This will negate the need for polishing!

This is a great idea if you are willing to buy multiple wash pads!

Would definitely use Preserve on the rubber pieces. Trim EVO should darker the brown a bit and help a little with fading. Difficult to say though because we don't really know what kind of plastic it actually is. Best to try a test spot on somewhere inconspicuous first!

Glad to hear that you had a good experience with it!

Its between 1:10 and 1:15 with water. It will say it in the instructions located on the bottle

Is one better than the other?

@@AdamosGarage Comparing Waterless to Rinseless? Waterless is more convenient but Rinseless is going to be a safer option for your paint.

@@gyeonusa my apologies. I meant 1:10 or 1:15.

@@AdamosGarage We like 1:15

You can use this on that steering wheel, as long as you follow the instructions in the kit. We never recommend applying this product below 55°F. Then make sure that the seats are cool to the touch and never in direct sunlight.

We don't recommend doing this. The coating will have a difficult time absorbing into the conditioned leather

Because we haven't seen much benefit from layering wheel coatings. One layer has worked best for us and prevents a waste of product. Also you typically don't want a coating to fully cure in between layers.

For large gaps like door sills and the trunk area, we recommend an Bug and Grime or an APC along with a plush wash mitt. Then an easy rinse with an open ended garden hose. We steer away from brushes in these areas because you risk scratching when you wiggle them around these gritty areas. For tight places, a credit card wrapped in a soft towel is the move!

Good question. For screens you should not use anything more than an alcohol based product like Interior Detailer and don't spray it directly onto the surface. What you are mostly cleaning is dust and fingerprints. When it comes to protection, your only true option is a screen protector.

We recommend using the coating within a years time. Once opened, its only a month or two.

That would likely yield poor lasting results in comparison to Mohs. Rock the CanCoat for a year. Then after that use Total Remover to knock it down, then apply Mohs EVO!

Of course! You will have to come check it out next year!

It does not protect against friction. The only items that will do that are likely going to make your leather quite slick to the touch

@@gyeonusa is there any product in the lineup I can apply on top of the leather shield that provides protection against friction damage?

@@wsimon1800 Our only product that can help with leather friction is going to be LeatherCoat

@@gyeonusa So applying one more layer of LeatherCoat on top of LeatherSheidl for additional protection against friction damage?

@@wsimon1800 You can do this, yes

We would recommend Pure EVO thanks to its stronger chemical resistance!

Definitely recommend Pure EVO on black vehicles! It will help make the black have nice deep gloss

@@gyeonusa Thanks for the fast reply sir! I will order the Pure Evo this week!!

We only recommend one layer of Matte EVO. Then maintenance with a product like Cure Matte!

@@gyeonusa thank you so much! I'll have half the bottle left over. I guess hold on to it and reapply in a year before it expires after a full decon wash?

@@theomni123 Will it be going on matte paint or a vinyl/ppf?

@@gyeonusa matte PPF. The PPF is clear so that the car's original paint comes through, just matte.

@@theomni123 You should use a good amount of the bottle on matte ppf. Its going to absorb more of the product than paint would due to its porous nature.

A single layer gives you up to 36 months. A second (top) layer will give you an additional year. Wash the coating like normal after it has cured. Then do periodic decontamination washes throughout its lifespan. Also use a topper like Wetcoat or Ceramic Detailer!

We do not recommend doing this. You will run into to issues when applying Leathershield. What kind of leather is it?

@@gyeonusa full merino leather from BMW!

@@sueddo2634 Okay cool. So that is a semi-aniline leather which shouldn't require any sort of conditioners if maintained with quality cleaners. It has a poly coating on it to help protect the grain from mostly UV. But, once again, we recommend going straight from leather cleaner to leathershield.

How do you deal with cleaning it after? Do you apply conditioner on top or the gyeon cleaner in between the 18 months?

@@87adamrg Maintenance should be just a periodic cleaning with a dedicated leather cleaner or Interior Detailer. Most modern leathers don't require conditioner to be used

We have heard of it being done, but we can't recommend doing this for application

Great question. It is what you should use on full aniline leather that needs conditioning. On leather that you are okay with being slightly slick to the touch and want to do cleanings/protecting more often. Maybe you are nervous about a year long ceramic coating and want something a little bit more simple to use. Thats when I am reaching for LeatherCoat

@gyeonusa thanks for answering my question. I'm general leather shield is more durable than leather coat? Is that an accurate statement?

@@e.jharris3498 Absolutely

Hi there, sorry to hear that you are having some issues. We recommend reaching out to our customer service department for help in this situation. Send an email to hello@gyeonusa.com!

We do not recommend applying Mohs EVO to your windscreen or exterior plastics!

He shows you in the video.

For the glass on the panoramic roof, we recommend View or QuickView. Or CanCoat EVO as a more versatile option

Love to hear it!

We don't recommend applying this to vinyl trim. But you can use it on leather on your doors as long as you prepare the surface properly!

@@gyeonusa Awesome, and perforated seats take no harm, correct?

@@ArthurMSoto Correct. Just be cautious when cleaning them that you get the cleaner out of the holes as best as you can. Then let them dry out for a while!

Yes it can! This is the product that we would recommend for that use.

@@gyeonusa Most excellent, thanks for the response

We always recommend at least 12 hours in a controlled environment after the application of CanCoat. If you are going to do this then we would apply Cure overtop after! Also, public car washes are not going to be a good means for preparation of the surface before the coating. We recommend a hand wash and decontamination process too.

It it matte or gloss?

We would recommend Cure Matte for this application

@@gyeonusa Thank you from The Netherlands !

We don't have a single product that can protect every interior surface. Preserve is the most versatile being able to go on plastic and rubber surfaces. All in one products don't provide the results that we strive for when we deliver high quality products.

We need more information. What are you using it on? What towels are you using?

@@gyeonusa Mix of TRC Pearl and sometimes soft MF scrub pads. P&S Sidekick express to be exact. Happened on 11 year old black Mercedes leather and a ‘23 Chevy, the chevy was dirty enough to need strong. Thanks

@@gyeonusa I have since diluted it down 2:1 with DI water so we will see going forward.

@@Chunkychocolatemilk7 There is a chance that you are removing some dye. This sometimes happens, depending on the type of leather and how it has been maintained in the past. Is there dye showing on the towels after you use them?

If it is a photochromatic visor then we don't recommend using Mohs EVO on it. We would lean towards our Ceramic Detailer instead!

Love to hear it!

These product are only designed to be used on leather. If you are looking for a light cleaner that's safe on everything, then check out our Interior Detailer!