- Видео 2
- Просмотров 6 258
Garage_Bilt_Diesels
США
Добавлен 13 фев 2021
Beginning to Vlog on Diesel repair and modifications, Specifically Cummins
Almost FREE 1st Gen 12 Valve Cummins
Just a little walk around of the free 12 valve and a little Intro!
Links For Good Content!
VBELTandSON
ruclips.net/user/VBELTandSON
DecentGarage
ruclips.net/user/decentgarage
FullHook Performance
ruclips.net/channel/UCxGKyeBPaNkUqDyJx-rWl7A
Links For Good Content!
VBELTandSON
ruclips.net/user/VBELTandSON
DecentGarage
ruclips.net/user/decentgarage
FullHook Performance
ruclips.net/channel/UCxGKyeBPaNkUqDyJx-rWl7A
Просмотров: 75
Видео
GETRAG 360 Shift Top Disassembly and Reassembly
Просмотров 6 тыс.3 года назад
GETRAG 360 Shift Top Disassembly and Reassembly
Much better video than most Getrag top end rebuilds. I just did mine thanks to your video. My issue was I couldn't shift into 5th and reverse. Found the roll pin for that shift fork gate came out. When I disassembled the skinny cross pin from 3/4 was broken. Can't wait to get the first gen back on the road!
solid vid, makes me a lot more confident in rebuilding mine. hoping with the body lift, the stub pulled, and the cross member dropped I'll be able to pull the top cover without removing the transmission from the truck.
I. Having trouble putting it back into the tranny could you offer me any advice? I have everything in the correct orientation on the cover but it won't drop into the tranny for some reason
My getrag has problems shifting into other gears once shifting from out of fifth any other time shifts fine just ordered top plate rebuild kit as trans gears and synchronizers are fresh hoping this helps
Is all that required if I just need to change out the spring?
Sorry I’ve been away a while, but yes it is, the spring will only come out the bottom unfortunately
Should use a magnet to put in those chubby guys for the detent
Do you know where I might be able to purchase this top cover assembly? I want to use this for building a sim racing rig
Just came across a drop-in one on a forum, about 450usd
I have a 89 and it won’t go into 1-3-5. Would that be a role pin trying to come out or do I need to get the rebuild kit with new springs and dent balls ?
Just watched your video and I have a problem with it 5th and Rev. The shifter keeps jumping out of Rev. Shift gate hanging up what is the problem. Help!!!!
Without seeing the inside, it sounds like you have a worn out synchro once it clicks in it should stay
What kind of headlights you put on that truck? I purchased the phillips led and the are pretty good. Copy of trucklite from what I know. The only crappy thing was the adjusters snapped when ai went to adjust so I had to grab some jeep ones and modify them to fit.
Funny you should say that, They are From amazon, Cheap Trucklite Knock offs, I used the round style in a suzuki samurai and they were great lights, so i found the same ones on amazon for the squares and as it is, been a year of pulling trailers and ranch roads with no issues thus far!
@@garage_bilt_diesels181 good stuff man. Glad to hear.
Would I be able to replace just my 3-4 fork?
If that’s all that’s wrong with it
I meant to ask whether I would have to disassemble all of the shafts or could I just pull just the third gear shaft?
@@andreweverett6925 your going to have to at least the 5-r shaft and to get to it but you could do it in theory but the detents being out of whack could be an issue
What size punch did you use to take remove the roll pins?
I would have to look, but if I remember correctly it was an 1/8” or 3/16”
great video! where did you get the rebuild kit?
Thanks , I have searched lot to find shift fork repairing video like this. Very helpful
My get rag 360 will get stuck in any gear I can get it back in neutral fine with a screwdriver and it goes in every gear fine but the shifter has ton of slop would that be my problem. When I say a lot the shift lever will hit the dash before going into third gear
I changed the oil no metal flakes it looked good
How does the actual shift stub look? Seeing as you have a ton of play, I would look there also check on the two screws in the side that hold it in square you may have sheared on and it’s not moving squarely in the shift tower
@@garage_bilt_diesels181 just now seeing your reply but I matched my shift stub up with one from a hood shifting get rag used a caliber and they are the same. My problem is my 1&2 shift rail is loose and my 5&R is loose. What is the cause of that ?
@@garage_bilt_diesels181 I can use a screwdriver and move the gates on both of those and it moves the whole rail so that is why it is getting stuck because the stub can’t reach the gates
@@gagedavis3890 the detents in the shift rail towards the front could have excessive play in them… I grenaded a 2nd getrag in 2 months and went to an nv4500
Nice truck
Thanks man!
Thanks for the info.
I have a question on my shifter its really stuck and there is no broken spring I ordered the rebuilt kit to do the rebuild like you did is there anything thing else i need to look for so those three shaft would move smoothly ?
You could have worn shift forks, or one of your roll pins could have walked out and could be binding
Video was a big help. Thanks!
This video is great would have been nice a couple months ago had the same broken spring. Need more videos like this