Видео

The rollers come off the roller itself just like normal. The roller head piece that you slide the paint roller one comes apart for easy cleaning.

mark mckay Pretty easily. I usually picked them up at Lowe’s. I’m sure places like Sherwin Williams that sells the airless sprayers sells the rollers too or they can order them for you.

For me they’re at home depot for $12.98 CAD.

Size matters bro...size matters

I’m pretty sure you can purchase shorter ones. I wanted the long one for the 12 foot ceilings.

You are right , after 2 hours you will feel the weight , especialy after ceillings...

as well...lets say you are doing another colour..you have to release pressure to gun right?.. and then undo roller end... wash it...but what about paint that is still in those two extensions?

Kiss Deano Yes I did add the extension pole because I was painting 12 foot ceilings.

thanks...but what about washing ...how does one continue with second colour..do u have to wash inside pole?@@eyekande

@David lol

Kiss Deano You have to clean all the paint out of the rollers and all the paint let in the hose. You do that by taking the roller off and taking the hose that’s in the paint bucket and putting it in a bucket of clean water. You then press the button as if you are painting again. It will suck the water out of the bucket and push all the remaining paint out of the end where you took the roller off and the paint can go back into the paint can. Soon as you see water instead of paint stop to prevent getting a lot water in your paint. Then have another bucket to continue running the water through the lines to get all the paint out. Once it’s clear water you are ready to start the new color. Take the hose out of the bucket of water and place it in the paint. Start sucking the paint up and keep letting the water flow into that the dirty bucket until you see straight paint. Once you see straight paint out your (cleaned Roller or brand new roller) back on and start painting.

it doesnt go directly on the roller slightly underneath , i havent used the jet kit but have used this and i love this . The downside with the jet kit is if you're doing interior you still get overspray even though it's minimal because of the roller and a guard you still get it this has no overspray whatsoever

Tom Smithlin for your fence just use the gun sprayer, because with this roller you don’t gonna be able to paint the wood joins.

Home depot . Each extension $ 45

Lowe’s

Leo Tully I feel that its the cutting in that kills me, thought about using one of these now for a while, It would save a lot of energy going back and forth to the pan, Thanks for the demo

Leo Tully the Graco jet roller is faster.

Barry Oneill For cutting I recommend the Sprayguide from Titan, since I use it I reduce the time painting more than 60%.

So this way you don’t need to cut in corners?

@@GeTintheCLAN You still have to cut in any corner that is adjacent to another wall or ceiling that is a different color.

Justin Stokes To clean the roller you just pop the roller off the actual hand piece and take it over to the sink and push the guts out (plastic center piece inside the roller 4 pieces. ) and then just disassemble the guts (takes 3-5 seconds) and clean the guys off then you just clean your roller under the sink as you would any roller. Once clean assemble the 4 piece guys back together inside of the roller (very fast and easy) and then just slide the Roller back on the hand piece and lock it in and your are ready to paint with a new color or be done for the day. Good luck!

@@eyekande Do you have to wash the sprayer before changing colors or not?

Evarson Azevedo Yes every time. Scroll down in my other comment I just added and it explains how to do that.