Видео

Soon. 😊

@@WATTScostumes cheers mate. Getting it nice and smooth is hard work. 🥵😓😄

I’m using both PVA and CA glue. CA glue to hold the frame in place while the PVA dries. 😊

Can’t please alll I guess. 😊 My new video don’t have music in it.

Cheers. I think it’s because of the finish. The wood for the secondary planking is much finer than the first planks.

@@genojoe3176 Cheers Joe! 🫡 well, I got the ship exactly 3 weeks ago today and I’ve probably spent 70-75 hours on it so far. Give a take some hours. It’s going to slow down with the hours the next month until I have holidays in mid December. Then I can pick up the slack 😅😅 Have to spend a lot of time on the hull, it’s imperative that it’s on point 👌😁 Apparently my family wants to see me again, so taking it easy from now on 🫶 It’s fun to build something different than sailing ships, this is my first ship without a sail.

@@TheBurningSail Family? what's that! Just you worry about that ship!

😅😅 I’m not allowed to bring Missouri upstairs, so I’m confined to building it in the workshop 😅😅 No to find something else I can build upstairs, so all wins. 👌😅

😂😂 ​@@genojoe3176

@@ech0tang0 😅😅 I got a new camera holder, so I was checking to see if you could actually see what I was doing 😅😅 And this is is my first time I don’t have music in one of my videos, thought I would try it out. What do you think? Silence with confused eyes or RUclips playlist? 😅

@@ech0tang0 oh never mind me. I get what you mean now. 😅😅😅😅 Thought you meant me looking confusing into the camera to see if everything was ok with the shot. 😅😅

@@kingbattledestrucionjuegoe7999 cheers mate. 👌🫡😁

@@BennyCFDcheers mate. 🫡🫡 I’m using contact cement, once it’s in the deck it’s nice and sticky and you can just put the pieces on. Ca would talk way too long to glue every single piece on.

@@kingbattledestrucionjuegoe7999 Ahh no worries mate. It’s 135,5 cm long 18 cm wide 32 cm heigh. Don’t know how much it weighs, but the parcels it come in said near 12 kg. But there was also the paint pack and some other stuff. I would guess when completer it will wraith around 10 kg. Cheers for watching mate. 👌🫡

@@kingbattledestrucionjuegoe7999 excuse me?

​@@TheBurningSail he/she means centimeters I think !? .

@@barriewright2857 yea he wanted the measurements. 😊 Gave them to him in another post. 😃👌

@@jamessmckay cheers mate. 👌🫡😁

@@maxclickenhof1049 hiya mate. That’s the pin pusher from Occre. I have a couple throughout the years but this is the best one I tried so far. You can get it here occre.com/en/products/pin-pusher however I’m not sure what you need to pay in import tax, so it might be cheaper if you can find one in your local hobby store, I dunno. But that’s the one I use. 😃👌

Cheers mate. Although I know the planks are out of scale. 😅🫡

@@markthaxton3839 purchased it online from a Danish web store. 😁 It’s just a normal cutting mat size A1 I think. 👌

@@TheBurningSailthank you!

@markthaxton3839 no problem mate. 👌😃

@@colinjohnpack3105 that’s a matter of preference. I personally don’t like full planks on a size like this. If it was smaller then I might do it, but the outcome is much more satisfying and a lot nicer in my opinion 😊

You’re absolutely correct. I just got it confirmed from the curator of the New Jersey, that none of the Iowa class battleship had/has portholes in the hull. They had in the superstructure tho. And I’ve already soldered the LED’s in the hull. 😩😩😅

@@TheBurningSail battleship New Jersey is about an hour from my house. I visited that one day and spent the entire day there just walking around. It's fantastic. I'm going to check through my pictures. If I have some good pictures that look different I will send them to you

@ that sounds awesome Joe! I really want to see one of the battleships in tel life one day. But that requires me to fly to the states 😅 I’m really interested in being absolutely sure that there are no portholes in the hull. Makes sense if there isn’t, but at the bow and stern, just below deck there might be a few portholes. I’m not 100% sure yet. Even tho Ryan the curator said that there isn’t. He also might know for a fact 😅

@@TheBurningSail Ryan lives and breathes on that ship. He knows every square inch. I met him when I was there. Really nice guy

@ he seems really nice, and odd in someway. He tends to stop mid sentence and then talk about something different. 😅 However I think it’s because he’s just a huge New Jersey buff that he has to stop himself so to stay on topic. 😅🤷‍♂️ which is relatable. 😁

Just two layers more 😅😅😅that’ll be done in an afternoon. 🤪😅

The mini sander is the Proxxon Delta Sander. It can also be used to cut as you can replace the sanding part with either a 8 or 1,2 mm cutting blade. I love mine to bits. 😅😁🫡

Go for it! 🙌🙌🫡

From Occre. The link is in my description below the video. 🫡👌😁

Cheers mate. 🫡👌

Took about two days, most of that time were spent on cutting and painting strips tho. I used contact cement and that was really fast. You can probably do it in less than two days, I’m just not fast at times. 😃

@TheBurningSail yikes! I figured as much, but the end result is amazing

@ it wasn’t that bad really. I might have spent a day cutting strips and a few hours planking it. It goes faster with cement than if you use PVA glue

You mean the for the smoke generator I reckon. It’s been decided for me, that I don’t want a smoke generator (wife told me that I didn’t want it anyway) 🤷‍♂️😅

It’s just a normal cutting mat, but big. Think it might be size A1. 😁

Cheers mate. 😁

@@rocuall no idea what that means. 😅😃

Cheers Joe. 🤩

@@ech0tang0 I’m hoping I can keep my regular upload with once a week. However, some things may take longer to make than I actually have available, have both a full time job and a full time family. 😃

@@WATTScostumes im Building Santa Ana on the side, so ambitious build I’m used to. 😁 Cheers, I’ll do my best to make it special. 😃

@@TheBurningSail The Santa Ana looks great. A very meticulous build. You are right on the timeline of what it will take to complete the Missouri . In my mind I figured 3 years. Have fun. Best time spent. Cheers

@WATTScostumes thank you mate. 👌🫶

It turns out that there actually is a few. I just don’t know where they are 😅 But most is drains and whatnot.

@TheBurningSail drains have to be to the aft, above the waterline. On a warship, i think they are somewhat hidden.

Just got it confirmed from the curator of the New Jersey. There are no portholes in any of the Iowa class battleships. And here I’ve already soldered the LED in the hull. 🤪😩😅

@TheBurningSail oh ! Too Bad ! BTW just paint the LED thé same color as hull, and don't connect them. Lesser loss.

@ they at already connected and everything is wired. But I can just cut them out if need be. The insert are also blinded, so I would have to drill a hole in them before the light could be seen.

@@ech0tang0 cheers mate. 🫡🙌

Cheers mate. I’ll do my best to make it a good build. 👌 It’s 135,5 cm long. So yea it’s very big. 😁😍

This is the new USS Missouri in 1/200 scale from Occre. You can find it on their website on Occre..com. It’s massive! 😁😍

@@Curtis_Wooden_Shipyard yea it’s pretty cool. 😍😁 Cheers mate 👌

Its new to me too. First time I’m doing a ship that doesn’t have sails. Spent an evening cutting planks. Turns out it wasn’t even enough for half the ship. 😅😂😂 it’s HUGE!! 😱

@@TheBurningSail Dig in! You have a long road ahead!

Fanden? 😅😅 you trying to speak danglish? 😅 Yea it’s big, like massive big. 😍

@TheBurningSail I'm hoping it means what I think it means and not something completely perverted lol 😆 😅

@@GregWilson635 depends on what you wanna say 😅

@@GregWilson635 I plead the fifth...

😂😂

@@Occre she’s well underway. 🙌🙌😁 it’s a beautiful kit! You guys did a really good job. 👌👌

Hi Greg and thank for subscribing 😁😅 I’m sorry to disappoint you, but this ship requires no sails. 😃

@TheBurningSail oh no 🤦‍♂️ 😢 I'll recover I guess . For some reason YT unsubscribes me from multiple channels every week lol

No sails for the burning sail. 😅😅😂

Yes, this will probably be a good spending. 😅

@@TheBurningSail I have seen the benders in action and one is pretty much mandatory with something of this scale. This is going to be amazing!

It’s going to take the amount of time it needs, no rush. But it is a pretty big build and something I’ve never done before I wood and in this scale. 😅

@@TheBurningSail HUGE kit!

There’s no plastic what so ever. Everything is wood, cast metal parts and loads of PE 😅😅 Cheers man. 🫡🫶

@@TheBurningSail did not know that. Sounds great.

Thank you very much, I hope it is to your liking. It was a wonderful model to build and I had loads of fun doing it as a black ship. Thank you for making it possible. 🙏

@@TheBurningSail We really like your videos and can't wait to see more!!

@@Occre 🫶🫶🫡

Thanks brother! It was really fun to build. 👌🫡

@@ukdave57 cheers. And thanks for watching mate. 🙌🫶

Cheers Greg. 👌🫶 It’s not a bad beginner ship or a ship to have fun with, like I did. 🙌😅