Видео

Thank you!!!!!

Thank you! Your videos have helped me many times.

Love these videos, but ... can you please go back and talk about 'breakpoints'.? Maybe a new video - next in the series. Whatever. This just seems to keep coming up in the forum and users are not understanding that using these will prevent small parts from falling through the grates and getting destroyed. Yes. You have to 'trim' the breakpoint tabs out after the fact. But you don't lose any parts. Anyway. This keeps coming up and I'm just hoping you'll cover it in a video I can share instead of repeating myself every couple of days. Either way, I do appreciate the time you've taken to create these videos.

THAT was better that WeCreat support !!! Instant new follower!! MANY THANKS!!

Is there a way to do this with images, like a small section of a photo to see how the differing power and speed settings affect the result?

Hey, you said you weren't going to make any assumptions...at 4:20 you went back on your word : ) Great video. I just got my machine and need all the help I can get. Too bad they keep updating the software and nothing remains the same. Keep making the videos. They are appreciated.

Yes it has thank you

how do you run the camera calibration?

Hello, very nice! What dob you use to clean the top/lid?

THANK u for these videos!

I noticed if the hatch opened while turning on the machine it stays on until I close it then when the project is done if I wait 2 minutes after all stops and open the hatch again the light stays on

So helpful! Thank you!

How on earth did you get the hose back on? I"ve been trying to get it back on for over an hour :'-(

Thank you that was very helpful

Hi Lonnie, I am trying to etch on a glass that does not stay in the rotary tool for WeCreate any tips on how to do that?

Thank you for doing these vids I have know idea how to use the make it program

Yes, yes yes! I need more of this. These videos are exactly what I’ve been looking for! Please keep up this amazing work. I am learning so much!

Have you experimented with already colored stained glass and using the same method? I am interested in engraving colored glass and then coloring in the etching…

I can’t get my laser to print or cut. It did 1 then quit. Brand new machine. What am I doing wrong? I tried beginners. 1st one was good. Next one the laser hit the basswood that was enclosed slid and now it doesn’t do anything? How do I fix it.

Thank you!!!!

Thank you for making this video! I removed the tray from the bottom as we unboxed it and I was having an issue getting it in the right spot.

Once again great video.

Hi. Do you have a video for when you bring an image into the software, how to modify, ungroup, get it to engrave and cut

I don’t have EDIT NEAR THE wecreat logo near the left , why?

ive been trying to engrave on a watchband and even tho the image is centered, the image "moved" and it ends up not being in the middle of the watchband. Have you every tried that? do you have any tips on that? The watchband surface has a very slight curvature but i dont think is significant. so i am not sure whats happening. I have tried it 2 times, but with similar results after autofocusing twice and checking the image is centered. Im getting the same results with a wooden keychain. Very informative videos! Thank you!

Hi there! I have questions! The way you could curve text, can you curve a line you've drawn? I haven't been able to figure that out. Or is there some way to draw a circle, then erase part of it to have a curved line? Next, If you upload an image you've created somewhere else, for example I made a drawing on Canva... When I upload it, can I turn it into a cut option, instead of just engrave? I cant figure that out either. Last for now... lol I finally got brave and updated the software, now my work space isn't accurate. It seems to not be showing the full area, my square board appears as a rectangle, and when I place my image on the center of the board it doesn't cut it when i placed it. It runs off the board.... I'm tempted to uninstall the new software but cant figure out how... lol HELP

Never a waste of time watching your videos, thank you!

Love your videos. Great tips!

Boy that’s a lot. How do I know when it’s time to clean it? Thank you in advance.

Can you please tell me the power settings for the tape? Thanks

Great video as always. Thank you. Do you have a link for the crumb tray?

Thanks! I will do that today!

If you’re not sure if you’ll hit the sides of the box, frame it which should test the outer edge of your image or change the power down to the minimum and run the job. If the head moves your box then you know you have a problem but hopefully you haven’t damaged your box.

Can you do a multiple jig like for keychains please?

Great information ty

Can you use spray paint?

Hey Lonnie, New to your channel as I am going to be getting the 40w unit in July. First, Semper Fi. 3/1 India Raiders 87-90. Happy to see another Jarhead out here be creative. Take care.

What about 1/2 gallon jars? What would you use for settings?

Thanks for the tips, especially the little rubber feet suggestion

Why do you need to paint it?

Lonnie your videos keep getting better! Great Job! Where did you get the screw driver?

Another great video. How about the alignment if you want to do two OPPOSITE sides of a tumbler? Name on one side and then how to align the logo (or whatever) 180 degrees opposite? Will your tape trick work - if the tape is stretched from one side to the other (across the diameter - either the top or the bottom)?

Did you drill a hole in the cabinet for the wire to exit? Can you show the location of that hole or please explain how you got that wire to the outside. Thanks - really like your videos!

OMGeez, Thank you so much for this vid! I was so worried about upsetting the laser with turning it. **Also, I used my cell phone camera instead of the mirror. Took pics at each step too before detaching things. Thanks again! Kim

Can you do this for other materials! Such as leather?

I want to know about the lights you added inside. Very much needed for when you open the top.

Thank you sir!!!

Thanks for the advice. Followed your advice and made a world of difference. WeCreat really needs to integrate a light strip inside that stays on.

Hi, what if I wanted to Engrave (just a line) [NOT Fill Engrave] an image I uploaded to the WeCreate MakeIt! Software. How would I do that?

Great job Lonnie. People are losing sight of regardless of how long it takes the difficulty of how hard the change takes, like 1 out of 10 its like having two lasers for the price of 1 and a third. That's hard to beat. Of course, there are people who just like to complain.