Видео

Than k you.

Thank you! I have seen Michael Johns use these this way! That's when I first started using the Durkee hoops with the clips!

This is fabulous!! Thank you!!

that was a great class on the bandaid and greaet helpful hinst and i feel the same about black thread thank you the video and for the design i will use it a lot hugs

Gheez nevermindchecking if we can see u, watch u don’t cut his paws. U also don’t look too fussy about their trims either. Have u ever cut one ifthem

Hi Regina , I thouroughly enjoyed your tutorial on making a Quilt Rod Pocket , with your help i was able to make one for my Exhibition entry quilt and it turned out perfect!! im so excited as it is my first entry ever with Victorian Quilter,s Guild Victoria Australia. ( the picture is my husband !! Cheers, Silvy Turner XXoo

Her little tongue is so cute! What a cutie.

Thank you so much! You are a lifesaver!

I do the same with my stabilisers.

Hola !... Cuales con las medidas de la corbata... Gracias

Thank you so much for making this video. It helps a lot as I’m a visual learner.

Well, I dug out my 1991 and a set of seat from my 1995 thunderbird Super coupe.... Both of mine have a spring on just other outer hinge latching system. When I say outer, I mean, outer hinge, closest to the doors. As the inner hinge is just a pivot with no mechanical latching .. there is a tension spring that hooks on to the cylinder/tube of the upper side of the hinge and the other end of the spring connects to the lower end of the hinge on the pin the slides in the arch slot. Now, the pin doesn't appear to be on yours, let alone the spring. Or at least it is difficult to see in the video... Soon as I pulled the spring off (shot across the room) my hinge flops around too.. Type in to Google search box, "1990 thunderbolt seat hinge" ... Then click the tab "images".... You will see a few photos of your hinges with springs and a couple with out... I hope that helps point you in the right direction, boss.... That was fun.... Any other challenges for me? On a side note, what are the odds, that your video came through on my recommended list, beings I used to drag race Ford Thunderbirds, 1983-86's, and then 1987-88's, then 1990-97's... That some oddity of a part, I could reference to my stick pile of junk, and visually confirm an actual 1990 hinge out of a Thunderbird? Strange how weird life can be some times... Good luck, any further questions, I will do my best to accept the challenge of answering it/them. While it is important to note, none of this is meant to insult your own intelligence or life experiences and abilities, but rather, I choose to live by the notions, that sometimes, when person is just too close to a project, it often times helps to bring in fresh eyes and hands to give a new perspective.. at least, I know it helps me allot, and the older I get, seems the more often I need outside eyes looking in to help pull my own head out of my a$$, so I can see straight.. lol... Sucks getting old.. again, any further questions, ask..

I believe that does lock up, durong collisions, or throws of inertia... Manually or physically hold it in the hand, in the proper up-right position as it would be mounted in the vehicle, and move it forwards into the edge of a workbench or something that doesn't move, and i think, you will discover that the seat backrest at that sudden moment of stoppage, thst the backrest doesn't continue to keep moving or pivoting forward other then the minor slack in the system... That fee inches of travel, is designed into thst seat, to allow for visual access to locate the lever, that is politely hidden by the B-pilar and seat belt hanging if thst was the year, over-shoulder seat belts were issued? But it allows the driver & passenger to tip the seat forwards enough, to not only see the tilt lever, and also, gain better access to it with the hand, otherwise, it is stuffed out of sight and hard to reach for it, until you know it is there .. please feel free to correct ke if i am wrong, as i do not know the year make and model... These kinda look like they are out of a Buick or Pontiac and possibly a Cadillac that had the decanting tilt and lean or the decanting tilt and sway front seats, thst when tilted forwards, to gain access to the back seat area, the back rests of the whole seat as an assembly, not only tilted forwards towards the steering wheel, but also leans or pivoted towards the center of the vehicle, due to the pivot points being at different lications, still on axis to each other, but a few degrees twisted off axis, which allowed more room or access to the rear seating area of the 2 door models, which often times had doors thst were very heavy and long, often times, exceeding 5 feet long. That made getting in and out of the front seats wonderfully easy but on a two door model, they still had rear passenger slots, more squeeze-in room was needed, and thise few extra degrees of the backrest pivoting forwards abd towards the center line of the vehicle, made the worlds of difference.. i am curious to fibding out what you come up with, as per, the factual reasoning behind your question(s). I look forward to learning about this.

Yes I always have. The minute I come in my house.

Those clamps are sold on Amazon. I bought them 2 years ago.

Keep them brushed and they won’t have tangles , I brush mine every day

OMG! The tongue!!!! Oh she is so adorable! What a good little girl! Thank you! This save me from having to shave my 4 mos Yorkie for a few mats. She HATES being brushed, having her face washed, etc.......:(. I try every day to be positive about her brushing and give treats and lots of praise doing this daily, slowly, gently. I can't get her to be OK with it. Makes me so sad.

I like your carrot!

Nice video and cute project just in time for Easter! Thank you

So adorable ❤️

Where can I get this embroidery pattern?

The pin side is supposed to not pull the hair out or break the hair. Fortunately my yorkie loves being brushed with the pin side..

I had a previous groomer shave my morkie bc she found 2 small knots under each front leg (her words) n no other knots. I brought him in as a blk n white ball of fur n picked up a pink, white n grey scared n shaking puppy! I thought she was giving me the wrong dog. She Said ik he is short but I gave you a jacket!!! I literally cried! He was 12 wks old at the time, now he is 3yrs old, he also needs to be medicated for his grooming. I won't ever go bk to her.

Thank you so much🦋

I want to thank you because I to got busy n haven't brushed

So much effort and skill went into your quilt. Thank you for sharing it with us.😊

Great job adorable yorkie

How did you get your white fabric so Stiff ?

This was great since it’s the first to show the large attachment. Thank you!

Hus

Hus

Can I buy this design in his?

I need a better brush. My brush that is similar to that does absolute zilch for my yorkie, I have to use a slicker which I know can hurt and is not good for yorkie hair. He has super thin skin and hair in certain places. He does not get too matted but he gets little knots in places like his belly and armpits and he hates me brushing them. I also need to teach him to lie down like that while I'm brushing him, he's usually fine getting on his belly but he's very resistant to do it while brushing him and I don't want to force it as he already dislikes brushing but will put up with it mostly. I'm new to small dogs and long haired dogs so it's a learning curve for me right now, he has short hair at the moment but longer on the beard and legs

(

Thank you, thank you, thank you! I have searched online and through youtube for a guide to trimming my Yorkie's hair. I zoomed in on pictures, I looked up definitions of grooming jargon, and I was frustrated! Finally! A real dog owner who could show exactly - and I mean EXACTLY HOW you cut your puppy's hair. It allows me to take that info and "translate" the professional groomers' instructions. I could never figure out which corner of the eye, the inner or outer, to start the part for my puppies hair. You actually show that angle! And where in the world does the ear begin and end and how to shave up to leave the top knot? You made sense if it all. If you are a dog owner and want to save money, watch all 6 parts of these instructional down-to-earth videos. My frightened rescue puppy and I are immensely grateful!!!

There is a reason for groomers to shave dogs! Stop lying to people! Brush your dogs Before they get matted! OUTRAGEOUS 🤬

my problem is my Yorkie's tail - the matting at the top is bad and it seems to hurt her if i brush it as it snags so i have to cut it out but i will try the coconut oil

Where do i find the mug rug pattern

Very cute! Thanks for sharing.

It looks so amazing and I have 2 little girls that I know, would love her. How do I download the pattern? Leonie

This delightful ornament will be perfect for my 2 granddaughters this Christmas. Thank you so much.

She has clean eyes.. how you do that

What a mess

That is painful for her if your hair was a matted mess would you want someone to pull your hair please don't put shirts on a long haired dog there skin needs to breathe and of course it will matt

this was so helpful, thank you for taking the time! Sorry the first attempt was such a mess! Too many overlaps

I was trying to create the design to be continous, Now, I understand that it will find it's own path, not me. Thank you

Cut longways through fur knots will be easy to separate.

My Yorkie HATES the metal toothed brush like you are using, and I know it hurts him. I refuse to comb him with anything metal. Also, refuse to take him to groomer because they shaved him and made him look like a darn lion. I wish you’d get that long hair out of this sweet girl’s eyes. It has to be bothersome to her. Oh my!

Great idea !

Thank you for adding this video. Love seeing that its not shaving. Like every other people. Thank you ❤