- Видео 860
- Просмотров 180 518
Backyard Creations
Великобритания
Добавлен 23 сен 2011
what i get up too
let me start by saying what i do is a mix of things,
its not scifi all the way but it will pop up,
only subscribe when you know what your getting yourself in to 😂
a heads up im learning as i go im not an expert.
prop building art craft work metal work sculptures
as like a lot of you im just here to show the ups and downs of making things,
i make what i like or there wouldnt be any point.
nothing to write home about but hey maybe a little fun along the way thrown in for good measure
as well as building .
i encourage the creative only.
your welcome to ask me questions related to my channel
let me start by saying what i do is a mix of things,
its not scifi all the way but it will pop up,
only subscribe when you know what your getting yourself in to 😂
a heads up im learning as i go im not an expert.
prop building art craft work metal work sculptures
as like a lot of you im just here to show the ups and downs of making things,
i make what i like or there wouldnt be any point.
nothing to write home about but hey maybe a little fun along the way thrown in for good measure
as well as building .
i encourage the creative only.
your welcome to ask me questions related to my channel
king kongs hand on the large side short#3dprinting
3d printed
king kongs hand on the large side
cut the hand off the figure
in 3d builder
then printed it larger
king kongs hand on the large side
cut the hand off the figure
in 3d builder
then printed it larger
Просмотров: 37
Видео
3D printing a hand not just any hand short#shortsvideo
Просмотров 233День назад
3D printing a hand not just any hand 😁 i will be back with a bit more info like subscribe bla bla bla
christmas gift welding short#metalsculpture
Просмотров 2021 день назад
Welding a sculpture christmas for some one its 😊sorted
welding sculptures learning as you go along, A christmas gift from a welder
Просмотров 7421 день назад
welding sculptures leaning as you go along A christmas gift from a welder as in myself..... well the woman in question does like birds, a small peace of the video was lost my battery went flat, but it was me welding a spoon on for the back
beetlejuice baby 3d print but much bigger
Просмотров 65Месяц назад
beetlejuice baby 3d print but much bigger and i nearly broke one of my printers dont make the same mistake 🙄
BEETLEJIUCE LETS SEE HOW BIG WE CAN GO ?😁 SHORT #3dprinter
Просмотров 472Месяц назад
BEETLEJIUCE LETS SEE HOW BIG WE CAN GO OR IT COULD JUST ALL FAIL ? BUT I WILL BE BACK ETHER WAY ,
beetlejuice baby 3d print
Просмотров 86Месяц назад
beetlejuice baby 3d print um should i print it bigger, say beetlejuch 3 times and i will think about it 😊 like subscribe bla bla bla
Batteries Not Included 8 inches wide 3d printed short #3dprinter
Просмотров 1,2 тыс.2 месяца назад
Batteries Not Included 8 inches wide 3d printed had to cut it up in a cad and was left with some gaps after 3d printing it, so i filled them with carbody filler, a simple led light does the job for the eyes , also has a large magnet in the base, and a small peace of metal in the top of the ship for it to attach too
inspiration you cant beat it short #metalsculpture
Просмотров 172 месяца назад
inspiration you just cant beat it . when it kicks in go with the flow, full build of this hawk is in my videos, thanks for watching 😊
metal work Art. Hawk sculpture finished
Просмотров 1332 месяца назад
Hawk metal sculpture made from cutlerly and sheet steel. apart from i do like making things, its your support that keeps me going, thank you 😊
back to the future pitbull hoverboard my take on one
Просмотров 4933 месяца назад
back to the future pitbull hoverboard my take on one
Hawks head. i just cant leave it alone short #art
Просмотров 6794 месяца назад
Hawks head. i just cant leave it alone short #art
how to make a steampunk bluetooth radio
Просмотров 3775 месяцев назад
how to make a steampunk bluetooth radio
blue beetle scarab 3D print and painted
Просмотров 2377 месяцев назад
blue beetle scarab 3D print and painted
the pirates of the caribbean monkey head 3d print short#
Просмотров 2187 месяцев назад
the pirates of the caribbean monkey head 3d print short#
I WASNT HAPPY SO I MADE THEM ALL OVER AGAIN
Просмотров 877 месяцев назад
I WASNT HAPPY SO I MADE THEM ALL OVER AGAIN
Hi friend, I would like to know how to process the flavour of local cigarette tobacco. Can you help me with that?
@@JawadAjory not sure what you mean by flavoring it, If you mean like you can get different flavoured e-liquids Maybe you could try and add some of that to some of the tobacco as an experiment As you can buy it in different flavors
Nice one 👍
The stems have a high nicotine concentration if soaked in a tub of water will make a insecticide that can be used on the tobacco next year
wow i didnt know that but i wish that i had known it at the time, as some of my crop got infested with aphids
Jaffa kree👍👍👍👍
That’s Incredibly Awesome!
Cool project 😎
its nice being able to lay my hands on things that i cant buy from the shop 😊
Those look great... 👍
thanks i will say its fun being able to 3d print, some times,
Awesome work!!🔥🔥
thanks 😊
Fantastic work!!👍👍👍🔥🔥
your to kind😊, i am passed those nuts and bolts figures now lol, im still learning 😊 and im managing to hide my welds even better. so im happy with the hawk. well most of it lol. have a great day 😊 .
So cool!!!👍👍👍👍🤟🤟🤟I love it!
3d printing oh its for a rainy day, i can do it with my eyes closed lol, give me metal work any day 😊
shocked how many views i have had and likes, as this project was an easy one. thanks for your support
🎉
😎 cool..
cheers ...
That's cool. Gonna try it. Thanks.
Greetings. Much thanks for the video. This is my first year growing, and I'm wondering why my leaves are different colours. Like yours, some of my leaves are a very uniform shade of brown, and I've got others that are more spotty, or have "dried green". Is that normal? Thanks again. Much to learn.
hi if you are drying them out i would go in there every day, and open the leaves up more so the air can get to them. thats all i can really think it might be
Thank you for posting this I been raising my own tobacco for 2 years put in 2 different types the other was very mild l prefer a bit stronger I'll try ordering some others to mix From Colorado US Cheers
hi there its good to have some feed back, its been a long time since i grew any, but i had people smiling here in the uk, when i was grwoing it some were shocked that it was even possable with our climate. have a good day ,😊
the making of the hawks head is in the link below ruclips.net/video/OWIgf9eOv5s/видео.html&ab_channel=BackyardCreations
Cool piece 👍
thanks 😊
i dont upload alot, as my health isnt so good these days, but i hope that i make the wait worth while when i do upload. thanks for the subscribes 😊 👍
Great work, looking good!!🔥🔥
@@Jeanclaudevanderfield thank you. I've been working on the wings which I'm really pleased with
"Flora and Fauna are the Seeds of Life!!!" - St. Immigration."
thank you for all of the views and likes. also for getting me to the 400 mark, keep on subscribing 😊👍
Nice one that's some work in that project ..how long does it fly on full charge.. 😁👍
if i sit it on top of my E scooter i might get four miles out of it 😂cheers for the like. some of it was a pain in the bum to make lol
Looking good..👍
thanks chap im looking forward to seeing where this takes me
Not a fan of the song choice. Just my opinion
its so hard to find any good music that hasnt got copyright
So true! I like to use White Bat Audio songs, if I don't compose them myself. It's more steampunk, industrial, cyber, and 80's style compositions, and the creator allows a lot of his music to be used as long as you credit him somewhere in your description. He's on RUclips and has links to downloadable albums as well. His name is Karl Kasey. So if you're looking for some cool beats to use with videos that have that genre, I like his work. @@farscape3100
Hawk Tuah?
Those are cool..😎
thanks im still learning how to paint them, im dreading painting the last one when i print it, oh getting those skins tones right lol
Well that's different..I like it cool project 😮
thanks 😊
'Promo sm'
looks proper clean! nice work buddy.
i like the first bird that i made better than this one but i thought that i would mount it anyway, i have a plan to make another bird. i want the practice
What a beautiful site,no stopping you now..get making things 🤣👍
touch wood i will come up with some thing. thanks 😊👍
@@farscape3100 I believe its touch steel in your case 🤣🤣
and i have another bag to pick up, so i really have to make some thing nice out of it all
Must be horrible not having a shed/workspace I'd be lost without mine. 😮
i can 3d print all day long but the real creative stuff yes the weather holds me back. ive made roses in the snow, i havent really got room for a shed, and that does drive me crazy
we had a tornado 🙄
More red is the color, stronger is the smoke. Light yellow leaves are much milder. My reddish leaves are quite strong. Got to make a mix I guess. Bigger the pot, more reddish the harvest. If I want mild yellow leaves, I’ll try with lot’s of small pots.
Thank you for all your hard work. Cheers m8.
its nice to know 😊. and my subs keep going up, for some strange reason 😊 and they seem to be hanging in here for me too which keeps me going. thanks for the comment 😊
dam the way the subscribers are coming in i will end up having to print this 😂
The 3d print of Bicentennial man is crazyy
i wanted one for years full size lol, as i have a full size c3po. but im happy with this one the detail is amazing on it
im learning as i go along i hope im able to encouage others to be creative to 😊
Nice
thanks 😊 some times i have to put it out there, becuase im trying to please everyone 😊
Looks cool.👍
cheers , its one of my fave films
Was this one of the reasons you gave your wife when you were trying to justify buying a 3D-printer?
lol i replaced her a very long time ago with a full size star wars c-3po ..😂 now i can have anything i want 😂
i hope you print her mate..
No messing ,i bet you could make these blind folded 😅
not the first one lol
Don’t worry about the hater’s mate good watch 👍
its mixed content on my channel, not everyones cup of tea. just trying to encouage people to give some things a try , and if i can do it well 😊 thanks for the comment 😊
Nice stash..😁👍
im a happy bunny and more to come
@@farscape3100 is the mother load, plenty to play with..👍
The robot
Can you make one for me
never let anyone put you off what you find inspiration for 😊
thank you so much for putting in the extra time and effort, the way you knot them up you see in old paintings ans stuff aswel... i am growing and making my own tobacco aswel and always wanted to try it this way. may this year be a good one for you too, you have helped in keeping a tradition among farmers here in holland alive and my thanks is great.
your very welcome i dont think that i have ever had such a big thank you, and ive been on youtube i think now its 12 years. one more tip if you have any other plants in your garden that have aphids on them, keep your tobacco plants well away from them, the aphids will thrive in your home. if you bring the leafs inside.
@@farscape3100 thats usefull ues bit i dry mu leafs in a shed so hopefully it will never come to that, i dry my leaf with burners, so that it gies quicker and leaves sweeter tobacco to be made into pipe tobacco flakes. but i want to try and make a sort of mini flakes of of this very traditional way of maturing the leaf. ive seen it dont in very old artwork and photo's of the past. so again greetings from holland. and thanks🌹