Видео

How's it goin homestead handyman, im still interested if you ever consider upgrading..

Hey im still interested if you ever could consider upgrading

What they dont tell you is when you go to buy. You are not buying a kit. You are buying 1 leg. So you have to buy 2 legs for each panel. 218 bucks per panel. 3 legs for 2 panels. 5 legs for 4 panels at 109 a pop.

Like that mounting system

For solar and wind.. do you install wind wires and solar wires into 1 charge controller?

That 12 V fan motor ain’t going to hold up that metal flap

If you raise your dimensions 1.0” on (all sides pieces). You can make a perch on the inside wall of the back under the roof, about 4.0” from the top of the roof. Choose a dowel rod dia., cut it about 3.” Long bevel one end. Drill your peg hole about 4.” Down on the outside of the back from the roof top. I like .375” dia dowel so find center & 4.” & drill a .375” hole for a tight fit. Pound in your beveled end dowel inside & the flush end flush with your back outside board. In bad or rainy weather usually the male leaves the box so the hen & chicks stay healthy. He seeks protection elsewhere. With the perch you’ve allowed him to stay sheltered also, (above the nest.) Watch your birds closely n see if I’m wrong. 😊 oh, n if you cut grooves about 1/16 deep n about .25” apart you can make a ladder for fledglings to leave the nest better when it’s time to fly and go back home while they learn to forge for meals. Mom n pop blue bluebirds teach their young before sending the fledglings off on their own.😊

My dream. 🙏

My new-to-me 2013 Raptor just started making this horrendous grinding noise on acceleration late last night. Glad I found this, because it sounds exactly the same, so looks like I'm picking up a new check valve on Monday.

How long is the drive between the two towns?

Loved the vid How many acres did you femce in?

no hole in my baffle plate.

Thank you...hat's off...

Why do you put an additional block on the opening? I've seen this done, I just don't know why.

What did you use for flashing on the gable ends??? Thank you

What did you use for flashing on the gable ends??? Thank you

Could you please add a link for the hardware?

Showing us your piece is like making a video while your dick just happens to be unholstered.

Thank you for a nice instructional video. Can a barn door be made weatherproof and security-proof?

Hello, I asked my grandson 5 year old what he wanted for Christmas? He said he wanted a bird house and a train. I’m very excited building a birdhouse for him. I will save this video for next weekend. Your instructions are very clear and easy to follow. Thanks!

how do you make those cooper lines that go directly into the tank

hello do you like chocolate. I like chocolate. hahahahahahahahahhahahahah

Mate Why are you wearing all that gear just to make kindling. Do you really need glasses gloves and ear protection. Bit over the top pal Suppose they don’t make men anymore just women with penises

The funny thing is when I was looking for splitters last year as an elderly woman the first video that came up showed a guy hammering the log into the other end then screaming how bad it was. I hadnt realized the name. Now Im wondering if he was just goofing but I never tried to find out what it was until this winter using different key words.

Hi i noticed you have a big hose clamp around the top of the pipe where he attaches to the ceiling adapter. Im cleaning my pipe for the first time and the installer didnt screw through the tailpiece, more like a set screw, but it bent in. And he didnt install screws in the other 2 holes at the top.

I want to buy one for myself. Any ideas on how and where? I'd like to order one.

If they are possums, you are lucky to have them. One of the best backyard critters to have. Don’t believe me? Look it up.

Thanks for your video. I had an old rocking chair that I had painted white 18 years ago for my daughter in law but she left it when she moved. It sat on the front porch for 17 years. After stripping all the white off, spindles weren't fun, I found 1 of the rockers was 1/2 way rotten where it made contact with the concrete. I thought I had to use wood patch knowing that probably wouldn't work. Then I found you! I just happened to find a piece of wood to get only 2 rockers exactly! Maybe my dad saved it for me! RIP dad. Thanks and sorry for the long story...I'm Italian! I could tell a story no other way! 😊 Thanks again! I'm going to go for it. Did you send on an angle on the inner rail? Have a great day!

that video gave me the info i needed for sure.. i was wondering how to do the rollers and brackets.. thank you

That sounds nearly identical to what Ive been hearing and came across the same fix. I bought the assembly and replaced the solenoid as well but to no avail it is still happening. Really thought I found the problem. Any ideas if there are any other components to this vacuum I may need to change or check? Not sure how to test if it is getting proper vacuum or not.

If you are experiencing this and you can’t buy a sink you can take a hot air gun and maybe get the drain fitting off by heating the fitting not the sink drain and maybe cut the fitting in a few places vertically on the fitting and slowly prize the fitting off being careful not the damage the sink drain the heat makes the glue come loose. I’ve done it before with PVC.

That is about as simple as it gets . You should also mention how important it is to have good help when installing the panels.

#armadillo

What's the conversion for propane BTUs to 9mm hollow points?

very nice Craftsmanship , do you buy kits or. Individual parts for all the Hardware needed? I’m a retired Professional Woodworker and I actually have a very large Extended Family and Networknof Freinds I’ve been thinking about building Several And give them away as gifts for Families to save on the expenses of the Funeral Costs that are IMO Outrageous

I'm planning on getting a couple of these. Except I'm going to be Lag bolting them to 8ft 6x6 beams then bracing with 2x6s because I am putting them on top of a seacan. Should keep everything together.

I have Similar Panels like yours from Sunpower But they are the 460w variant. (Bifacial) This is by far the Easiest Mount I've seen so far on youtube. Ive tried a few, Ecoworthy mount (it's the worst) EG4 Brightmount, It's really nice but there is a "LOT" of work involved to get them up compared to this. Thanks for doing the Earth Spike Method. It was something I was considering. Although I might just put rocks underneath my setup since the panels I have is Bifacial to try to get a little extra solar

I love what you did! My experience with ZIP Strips outside is the UV will make it brittle and break, maybe get some wire,,,

Welp I now know wth is digging these holes in my yard now. It’s most likely a opossum trying to find grubs.

Txs! (Barn-6 slidding wheels’s pamphlet is irreadable)

I'm putting up mine now. I have more in stock for purchase at NC Solar Electric LLC.

Well done vid, but what does one do when the piping goes directly into the tank? Waterless trap is used.

Good job

An update. Still works amazing! Hoof trimming, giving shots, milking - everything is a blast with this. Thanks!

Great video! It was hard to find a video that shows how to clean wood stoves with the ceiling close but you did it! Thank you! About cleaning the glass: we use wet newspaper with the ashes left after a fire and it works wonderfully and saves on chemicals!

How to drill if don’t have pocket hole

Nice system

Just installed a 10-panel array (395 watts) using this ground mount and it was super easy. Put mine on a small hill which did result in some extra leveling but nothing major. I enjoyed the video

alloy costs so much . i know it can withstand for decades even salty environments but i think stainless or galvanized and painted methods in iron will cost 1/4 .. or even less if there is local stock in market!!!! nice racking Btw

Great idea new EcoFlow delta pro 3 and EcoFlow delta smart Duo fuel Generator 4000 watts test it out on RUclips video 😮👍