Видео

Maybe add some ceramic blocks to the stove bottom to keep the intense heat from coals from overheating the floor ?

What might help is putting bigger tires on it as a upgrade however you may need to cut the body shell needed to provide clearance otherwise upgrade the suspention to stiffer one either third party or just go to your hardware store and eye ball the springs to best fit

Where u get the tires from

Throw some paddles on it and rip it in the snow! Snow racing is such a blast

I thought the shocks are built to be a dead shock and not rebound all the way like your showing. Being its rebounding like that, there is to much air in the shock.

🎉🎉🎉🎉🎉🎉

Looks like a pump track, not a skatepark. Either way though, Micro B is definitely a fun RC.

track is too tight and too short....You have the room, expand!

Put 5° camera and it turns even better 55 weight oil in the right rear and right front

stop letting go of the steering wheel, it will make a huge difference in being able to control the car

Great video! I appreciate the pointers on those o-rings!

Wow😮

The pilons on the right look fake lol

To the carpet statement you made, don't use rubber slicks. Foam tires are usually used on carpet racers that are similar to this.

Must be from all the burnouts on the drag car

If you wet the track down then roll it then wet it before running the car it will be more realistic and wont get as squirrely.

I like that traxxas flag you have I was wondering were you got it

Anacondas tires 2.8

All I can hear is u flicking that wheel. I really shouldn't Sterrett like that

We run, when its coulder outside, proline angle block tires (2.2 on 2wd buggy) when parkinglot bashing. These look to be exact same profile. They hook very good without any help, so if the car doesn't run well its most likely a setup thing like you mentioned. Prepping them would help, but also would make them wear out even faster. Normally we run louises on concrete and asphalt, only when these don't work anymore we take proline's since they cost 3x as much to run on pavement. I think, no, i'm sure you can have a lot off fun racing parkings with a few guys with the same cars (preferably 2wd's because they are more spectaculair to drive) since we also have a lot off fun doing it. Not to be rude, but if i would put my buggy next to yours in a friendly race you probably would throw it in the bin or race back to the shop to tune it. I know they are not exactly same cars, but think somewhat comparable. Also their handling has surprised some off my other friends with big 1/8 4wd rc's or spectators that occasionally stop to look whats going on... They are really fast, and not just in a straight line.

Hey my dad and I love watching you and I sub to you

Or...just learn how to drive? This was painful to watch. (Editing didn't help either) Sorry, i know its not fluffy rainbow feedback, but if the only comment you get is 'awesome video' then how will you grow. Yes, using sprays that make the tire compound temporarily more aticky will help with traction, which will help with lap times until the surface picks up enough dust.

Wait until a tool falls behind the drawer, so much fun 🤔 popping out the drawers 🤫 Alright for on the bench, have one of these ... just a different brand 👍

While I do appreciate the effort it takes to put out any sort of video for the world to critique, I don’t think that track is near big enough or that you are reaching speeds that those adjusts will make a bit of difference. Looks like you have the space, open that track up my man!

Awesome

Good video

Simple green for tire prep

Why do you make your tracks so small?

Great tips agreed dive into the transmission we do that on our drag slashes get them spinning freely. Great video can I make a suggestion track needs to be wider 👍🏽

Made in China

Cool , I love jumping my Granite , the slash looks fun 😊

I like the length of your track but the center length should be at least 4 ft. wide and open up the outside by same then you got a perfect dirt oval.

Your shocks have limiters in them?

Thank you I had never installed the bushings and this was perfect!

Dude, that track is terrible

You don’t need to trim the body, just raise the rear body mount up to the last set of holes. Also, remove all the factory grease from the transmission and differential, lube everything with Rem fluid. You will gain 3 mph by doing this.

You could have raised your rear body mount and wouldn't of had to trim the body

Solid build 🤘✌️

Have to bring out some of mine soon.

I have a Modify,.. are the front clipless system, the same width as the truck system???🤔

I forgot? 😊 Where did you text , where is your track ???

Oh, my God, the car is gay.

Claira says hi uncle cory.

i bought the last mudboss in SD havent even opened it yet and might not

Cool little track..🏁

The box says mud boss so that's what it is I don't care what the complainer say I have one and it will always be a mud boss

That thing is pretty cool

nice car

I am in trenton definitely interested in a visit did not know echelon existed thanks for the knowledge my friend

Love it!