Видео

There is 1 screw that hold the eject mechanism behind the barrel. Remove it carefully. There is a small spring in it (if you have an ejecting model). The barrel then slides out backwards. Sometimes, it gets hung up on the screw post. You just gotta give it a little umph to pull it out.

@@guninkdesigns3838 thanks

Yes and yes. As long as you have a mock that fits the chassis. A Suppressor may need to run without the metal shroud.

The “button” on the side should be spring loaded. When you push the buffer tube into place it should click or you need to push the button a little so it does. If it’s not clicking into place the spring may be compressed or something else. If that’s the issue I’d reach out to support.

Damn, it’s pretty close!

Bro, don’t have to apologize. You do you. Tons of options out there. That’s why I love em all. Thanks for watching.

@@orgcodekush chose you’re own adventure. lol.

I'm going to throw the piece then try to find them in the dark.... can you tell I was dropped on my head as a child?

@@orgcodekush 😂

No. You can run it with out a tube. In their case the tube only holds the brace/stock. Sadly, no codes. Just the link. Thanks for watching.

@@guninkdesigns3838 thx for uploading it i left a like

After you swapped? Or in general? The PS4 buttons sit slightly differently as the curve is different on the face plate. It it’s factory then your pad inside may be loose or broken.

@@guninkdesigns3838 yeah, after. I know the button dont have a curve but im still thinking about the solution to solve this with glue, melted plastic.. idk Something thats like increasing height of the square button.

Is this a statement or a question?

just pointing out the obvious

@@redfoxproductions5489oh. You meant is a miniature gun. lol. I thought you were saying minigun like the weapon.

Thanks for the feedback. I’ll see about turning the intro volume down so it levels out.

@@miniaturecollections2020 yeah, tapped them out. Shaved them so they are cleaner and will likely add a drop of glue. Thanks for the comment.

@@gregoryfranks7347 there are a few places but most are from China. Sometimes on eBay someone is selling but the price is high. Red Wolf Airsoft sometimes. Tonya Toys. A few places. Just gotta find the best pricing. Thanks so much for watching and being a long time follower.

@@guninkdesigns3838 yes I've seen those places. Looking last night I see 1 place that said Atlanta but they must source them then resell. Thanks for the response. I definitely appreciate it. Cheers

No idea about the Winchester. It was from a client. Same for the Python but you can find them here

www.targetprice2010.com/e-commerce/mini-model-357-magnum-python

@@guninkdesigns3838 thank you 🙏🏽

Thanks. Glad you liked it. I was actually thinking about redoing it in a more compact version. It’s pretty long. Lol

@@cashmeoutside8646 it is a range use. And I have multiple AR9s and various other. This is for fun and experimenting with options. Thanks for watching.

@@treydayy62208 very cool. Hope you enjoy it!

@@aviesto2417 thanks for watching. I know they still have some issues with some international shipping. I have not tried to ship to Central Asia yet. But many other places in the world.

@@guninkdesigns3838 I've been thinking to find company that can ship this product to my country so i can get it but it's gambling (schrodinger's third party) i hope they can fix it. I can't own real assault rifle so I wanted check if I could do something about it and I found goatguns. Also watching your videos makes my day :)

It is the only part I wish they would address. On my G22 that I have mounted it’s a hard pull but it runs okay. On something with a better trigger pull it would be better but I’ve only run the G22.

@@guninkdesigns3838 awe man saved me money in two seconds thanks 🙏🏽

@@erictheguapo I’m not an attorney nor do I live in Cali. I think, however that it would depend on the build.

@guninkdesigns3838 Thank you for the response. I didnt find anything specific tobthe PI-X beingnillegal in California but I went tobthe Micro Roni website that sells a similar product and on their site it does say it is illegal in California to own and/or use in California. I need to move out of this state .

@@erictheguapo ​​⁠​​⁠bro- the entire East coast could burn and I’d rather live on a raft than in cali.

recovertactical.com/disclaimer/

@@erictheguapo ruclips.net/video/LEGfy7kUPSY/видео.htmlsi=oyYQtTEusFc-wwBe

If you’re referring to the firearm when I pull the trigger, yes. It’s proven to be pretty accurate though. No issues. The trigger is just harder to pull than I’d like.

@@guninkdesigns3838 so its not loosed and its not a flaw

Glad it helped you.

@@-Tokay- yeah. If they are bigger than stock they will likely be an issue.

I saw someone use a dremmel to make a hole large enough for their sights to fit in and it worked.

@@erictheguapo I guess that’s possible. Depending on the size of the sights. Not a bad idea to try it on my extra one.

ruclips.net/video/PWRmofZFqWg/видео.htmlsi=ELzJf05DcyjIKdWS I did a video on some other frames but I didn’t have a Dagger lower. It might but I’d rely on their website to verify proper fitment.

@@guninkdesigns3838 ight thanks

@@beforedeth2104 well, I have a lot of guns. This is fun and adds the ability to add tactical features and so on. To each their own. Definitely don’t have to buy one. This isn’t an EDC or the one I grab in case of emergency. I have plenty of those.

Yeah! Ray has the lock on printed parts. He’s creating them non stop! Good stuff!

Sorry I didn’t catch this response before. It was pretty solid from 15 yards. I was surprised. The flex doesn’t seem to affect it like I assumed it would.

Good question. They “feel” the same. The only variable is the PS5 is more curved the button height is slightly different but playability is just fine. In my opinion.

@@guninkdesigns3838 thank you💪🏽

Pretty sure they are a bit different. The PS2 is almost completely flat, and I believe the buttons are very short comparatively. I have not tried it though.

The ejection mechanism… the small spring goes between the main part of the barrel stop and the the thin part gets pressed against it. Hold them together and pop it in place. Put the screw back in. *make sure the barrel is in first. Let me see if I have a video with this newer part.

If you can’t get it hit me up. 668-983-3892. Happy to help. I think I might have that part to show. I can’t find a vid with the new version.

Yes. You would need to modify the buttons the same way. The PS5 body has a different curve to it so they don’t sit at the same exact height but yes. The toggles are the same but rotated 180 degrees.

It’s a 3D printed part from the movie. If you join the GoatGuns Addicts FB page. There is a guy called Raymond who now sells the kits.

Thanks for watching. It’s not perfect but it’s fun

Hmm. I assume they are doing this based on the upgraded threads. It takes a little umph, but it has to be snapped together.

Thanks for the help.. I just had to find the right angle and it fit in. I really wish they made that clearer as I didn’t want to break it strong arming it. I get my Glock 17 on the 19th of this month and very excited to give this a spin.

@@zackariahkadri6306 good deal! Have fun.

It’s just a flexible piece of plastic. If isn’t working then make sure it’s making contact with the mag release on your weapon. All it does is transfer your pressure to the release. Is it on the correct side on the pistol as well?

Technically, it should fit in the hole but it’s not a buffer tube. So for a standard AR platform it would not work.

@@guninkdesigns3838 Thanks for the reply. I am looking for a buffer less AR9, that does not require a hollow buffer and tube/spring.

I guess I need to go ahead and order a dagger frame. I have two slides, but I don’t have the frame to test fit.

If you have not already, join the Facebook goat guns group. There is a guy on there named Ray, who is selling a new version of this kit and a fantastic group of people to help with painting ideas.

Haven’t tested multiple triggers. Here’s what I’ll tell you, based on what I know of the Gflex or “most” triggers, it should work with no real issues. However, you won’t get that beautiful trigger pull. The extension that makes this unit work will be a harder pull. I wanted to test a smoother trigger but haven’t yet. I’m using a Glock 22 in mine and it has a shitty pull already. Love to know how it goes. They have a return policy.