Видео

Don't drop it in the sand.

You totally sold me on these! I'm going to get a pair of slippers for my dad. (Also, as a fellow amazon influencer I learned A LOT from watching this!)

I replaced the fill valve on a Karat toilet with a Korky. The Korky started surging when filling after a couple of years. After reading reviews, I installed a Fluid Master. Moving forward, Fluid Master will be my go to.

I have a couple of these, one telescoping ladder like this and an extension ladder version. For contractor work, the extension ladder version is probably fine. But for the average person, investing in a step ladder version is the better choice for several reasons. First, for most home use, you won't be up against a wall. A step ladder that can be used anywhere is FAR more versatile. And many of them have the option to be folded all the way open into an extension ladder configuration as well. They are a bit heavier. But still lighter than options such as the Little Giant folding ladders.

Thanks this is something I'm looking into.

I have been contemplating on getting something like that but My biggest concern with electric pump is any little spark in the motor / battery can cause the whole thing to explode ? Most of these pumps say “ not for volatile fluids “

Appreciated excelent cool

Thank you for the video. It really helped me figure mine out.

Gread review! Do you have a video about their screwdrivers? I want an electric one but always get overwhelmed with choices.

thanks, I was wondering how those things work. I think they are kind of cool for emergencies inside your car when you are traveling.

"WARN," eh? Is that a threat?

I sat in 3-4 of these chairs at Osaki USA today because I am going to buy one. I settled on the Titan Rejuv. Looks very close to the one you have. After sitting in 4 chairs today 20-30 min each I had a slight headache driving home. You mention that.

You are a GREAT teacher. I feel like I could actually do this myself!!

I know which ball I’m playing. I don’t need a rubber stamp.

So I am guessing the stamp is infrared ink, and all you need is an Apache Helicopter heat scope to find your ball in the rough?

This has nothing to do (that I can see) with *lost* golf balls.

Great video. Just thought it was worth mentioning that coffee that has not been run through a paper filter contains cafeol and cafestol which can increase triglyceride levels. So you might want to consider post filtration on the way to your cup. Cheers!

Your video quality is excellent, but views are falling short. I can help resolve these issues if you're interested.

Great, realistic perspective on the program. Nice editing too I think staying the course is key...you never know what they will throw at us next! 😃

I'm sorry, is this golfing for complete morons? Did this "tip" really necessitate a RUclips post? Sweet Lord.....

I have never known a fellow golfer who put an X on their ball, much less more than one in a group.

Nice product! Some Emoji stamp add-on sets would work too! Hit golf shops to pitch as golf shop ads for their balls versus stamping costs.

As a 50 year old - this is great!!!

Thanks Ron, lovely to listen to you as ever.. looking forward to your new series of these.. keep them coming.. xx

😂😂😂 it’s disgusting with a Carmel macchiato with pumpkin sauce 🤢

Just brought one

I got the fluid master as you recommend. The brand new fill valve burps small amounts of water randomly. Any fix suggestions? Seems to flush fine

Nice and quick review. Im looking for a rear handled circular saw but can't decide on which one. Id love to get the skill worm drive but its not available in my country. I was looking at the milwalkee. Both milwalkee and dewalt are available to me and im not on either battery platforms so makes no real difference which saw i get from that point of view. To help me decide, why do you believe over all the others that the dewalt is the best?

Thanks for the review. My neighbor at my last house had two London Plane Trees with their huge leaves. In the fall they would form a pile in front of my gate about three feet high. The Toro Blower Vac could not handle leaves that large but would mulch my Red Maple leaves.

I use the vacuum only on the beds. I find that using the lawn mower with mulcher (no bag) and then going over with bag attachment takes less time. The mulcher reduces the leaves to 1/5 volume and the bagger is roughly the same capacity as my blower/vac. Also, it's much easier to empty out the bag on the lawn mower.

Waffle waffle waffle

Do you think it is powerful enough to use it as one-bag concrete mixer? I have used a Makita slow-turning drill, and it handled it, but I don't have it available where I am at, I need to get one to mix about eight bags, and I don't know if this will handle it.

Pull the trap

I have never had a clogged drain in my life. People must live like pigs.

Saw backer rod in. Didn't see calked finished product.

Hi Ron, just doing a few corrections here, the magnet on the back of an Iphone is called MagSafe (TM) that allows the phone to charge wirelessly. Also that other Iphone you tried is not an Iphone 12 as it has a button on the bottom of the device, i believe it to be an Iphone 8. Other than its a great video, and i hope you have an amazing Day.

Thank you! I've had a new seal for a long time but was afraid I'd break the plastic getting the canister out. After watching this I was able to change it out very quickly and easily.

Does the head have counterbalance for adjustable tilt?

Love this!! Can you provide the product name by chance? All I see is Hampton Bay formica at my local stores.. thanks!

As a user of this head and tripod I can say that the part of the head below the red pan drag adjustment is not a control. This is why it's not in the instructions. The ball has become partly unscrewed from the head. That's why you can see it wobble. The head needs to be taken off the tripod and tightened up. I've not had a problem with either the pan or tilt drag sticking.

Just for the record, it's NEEWER {"NEE-WURR"}, not "newer".

That's not the flush valve. That's the fill valve. Flush valve is the unit with the flapper . You made a mistake dude.

I bought this fluid head for use on my Manfrotto legs as it seems to be lighter than my existing Manfrotto and Vinted heads. The pan mechanism seemed ok, but the tilt mechanism is rubbish. After unlocking the tilt and setting the degree of damping, the tilt movement always seemed to stick at the start before the actual tilt.This meant that the tilt action was completely useless. Luckily Amazon have a great returns policy, so it’s gone back and I will continue using my more professional heads…

Very useful quick description . Thank you very much

Question: I purchase on of these from an action house with a no return policy. When turned on, it may or may not start up, mostly not, I tried different outlets and situations however can not get to run more than a minute or so,. Do you know if there is any way to reset this unit?

Thanks for the follow up.

Thank you for the Tripod fluid head tips. Mine is arriving this week and your video has given me a useful headstart... Cheeers.

Soft and neat

More like under butt ya know what I’m sayin

so when those big teeth hang up, you'll have to replace that proprietary pilot bit...