Видео

best video for automotive student like me!

Great video! Very informative and detailed, now you just need a cameraman or a tripod and it'll be perfect. 🙂

The tpms sensor needs to be 180° off from the duckhead when you mount the tire to ensure that it’s totally untouched and the tire will drop down over it. You can easily break a sensor installing a tire. Ask me how I know.

I feel vibrations at 65mph+...could it be tires? I had them balanced but I don't trust the ones I went to and it was standard balancing not road force balancing...struts are original and I'm at 180k miles so maybe it could be them?

This guy loves to scrape the equipment carelessly on the face of the wheels. Watched him do it also on his other videos. So crazy to watch. It’s cringe worthy..

This guy completely murdered this wheel. No finesse at all and smacking every tool and piece of equipment off the wheel. And notice the yellow dot light spot of the tire not aligned with the valve stem. This guy is amateur hour at best. This is a video of what absolutely not to do!

Makes me cringe every time I see this guy smack the tire spoon off the face of the wheel while dismounting. Never let this guy do your nice wheels

The red🔴 Green🟢 dot's on tire do they matter y/n

Hard to follow with the camera being moved around so fast. Thanks for the explanation on how they work

I've watched the kids balancing out the tires at places like Discount Tire with the Hunter and they don't even bother with these steps....Not joking.

Awesome Video

dude calibrate holy fakkk

my god i so miss this machine. psu broke down and i sold it, I remember doing this just for fun showing everyone how cool it was,

so nice how the pain is peeling

Best road force balance video on RUclips

Dam good information

I use coarse steel wool with brake cleaner before I stick wheel weights..then tap it down with small hammer

I have a Jeep Wrangler with 33 x 12 Mud and Snow Tires on it. when I had the tires mounted the shop put Ballance Beads in the tires instead of Weights. It's semi ok. But sometimes when I stop and Start again, there is lots of Vibrations at 40 - 45 mph and again at 60 - 65 mph. then the next Stop and Start, might smooth it out, very little to no vibrations. can this be corrected with Road force Balancing? removing the Balance Beads and using weights instead?

I wish these machines turned the tire/wheel assembly at highway speeds, since this is where most vibrations occur. A tire will act and run very different at 30 than it will at 60-70. Having said that, I wish I could find a tire shop that had tire guys that took the time to really dial in a new tire. Most tire shops are nothing but rush, rush rush. I now have my 2nd set of new tires on my E350 Super Duty that vibrate/shimmy at anything over 50. Yeah, the tire shop rebalanced them and it made a bit of difference but I found one rear tire has probably at least .75 inch lateral runout, the wheel is NOT bent. I will now, take back to the tire shop to show them and ask why the wonderful Hunter did not pick this variation up and eject the tire??

I had Goodyear put an expensive set of tires on my van. It had a odd vibration, and a Wierd road noise afterwards. They balanced it a couple of times, but nothing helped. I put up with it for about three years. I finally took it to a shop that could load force balance the tires. Two tires were good, but one was off by 45 and the other by 50. Goodyear wouldn’t do anything about it. I replaced those with Michelin tires, and no more issues. I haven’t bought Goodyear tires since then.

Sounds like a lot of sensors and stuff to fail

what can I ask the tyre shop to get all the things done for my 4 wheels and tyres? runout, road force, and balance?

I got this done at my dealership and they said my tires can't balance because the tires are 6/32. Is that right? You can't balance tires with thread life at 6/32?

van Bladel. Bladel is a small town half an hour away from me in The Netherlands.

What about the tpms

Best video yet on this. Thank you!! My shop I do not think knows how to use theirs. Sadly…

my car has ZERO vibration with the stock wheels and tires. Purchased a NEW set of wheels and tires, then got a vibration at 65 mph and a slight wobble on the front end at idle speed. Took the wheels and tires to 5 different tire shops and 2 bent rim repair shops and they tell me the wheels and tires are FINE ... I gave a guy a ride in the car with the wheels and he DID feel the tire hop but said it was my suspension. So i said, why is that hop NOT there with the factory wheels and tires, but it IS there with the new wheels and tires and he said i dont know but your wheels are fine.

Great video, I feel I could almost do my own tires if I had that machine. The problem today is that people are not trained properly how to do the balancing the best they can get it.

Thumbs up for using Simple Green!!!

I want You to balance my wheels:)

The soft key not working, any idea?

will this machine do roadforce balancing on a 225/70/19. Ford F550 tire

I just so wish that someone in the UAE understood how to balance wheels like you do.

Where did you first check that rotor with all that runout? I would like to know how you check that your mounting tooling is true and that it is not causing runout. Runout is excessive with my 4100, the shaft is true, but the faces of the mounting tooling are not perpendicular to the shaft. At the outside edge of a "finished" rotor, the runout is .006" It's driving me crazy. Did you ever clamp your tooling in the lathe to surface your tooling?

You do break the tire down in clockwise. No one must have shown you that once you bring your demount rollers in position there is a pin (black plastic ball) that you push on top that locks the demount rollers in position. That way you are pushing down on pedal demounting. More comfortable that way. Also, the second stage on the inflation pedal activates the blaster hose (on the left side of tire changer). It doesn't increase air in the inflation hose. Good demo otherwise.

i've been watching these videos, and considering purchasing this for home study. In your opinion, as someone familiar with this program, is it good for home study?? for a tech like me who has been in the field for a long time, but wants to improve electrical and driveability diag?? Awesome video!!

How much does that .machine cost?

Nice demonstration, this tire machine definitely would make lives easier if it had a press arm however, I would try using the top roller as one, also lubricating when dismounting is helpful. Wish you the best brother 😉✌🏼

Great video on how the whole process works with this machine. Great video editing as well.

Not touch screen🤣🤣🤣you made my day😆🙌

Love the tires!

You have to apply both inner and outer weights as indicated when using SmartWeight or you negate the very purpose of that mode. If you look at your first spin, SmartWeight showed static balance in the red and couple balance green (within tolerance). When you just put weight on the inner and did a check spin , you threw your couple balance AND static balance out. That’s why the machine requested more correction weight than before plus wasted your time. Change the mode to dynamic if you want to balance one side at a time like that (plus it’s a better balance). Scroll to SmartWeight, press and hold the control knob for a few seconds and it will let you choose between static and dynamic. There is also a fine mode that will disable rounding if the car is very sensitive to vibration.

Hi Jim, thanks for the walkthrough! What do you think about garages and dealer sevice centers who state that Road Force "isn't necessary"?

Love this type of balancing. It really does make a difference. Hard to find dealers or garages that do this type of balancing however. And yes it does cost more but if done correctly it’s a one and done deal.

Good info. Its been a while since I balanced a tire. I just had mine rotated and balanced today and the kid said my one wheel was at "22". But its also a 275/55-20 from a Ram. He said it was fine, so I'll take his word for it.

Thanks for not saying the rotor was warped

this one helps me learn more

How much do i get with the machine?

Helo

OH MY GOSH THANK YOU SO MUCH THIS VIDEO HELPEDD ME AHH please make more electude yt videos I just started an auto shop class and my teacher does it too fast but this was so perfect thank you!