Видео

@@donh1572 I haven’t had a lot of time to train with the USW-G nor have I gotten it tuned to the same level I have my Raider, so I can’t give a detailed comparison of the shooting characteristics yet. That said, I like the A3T stock a good deal more than Raider stock because is a more solid lockup and I can get a more comfortable cheek weld with it. The original USW-G stock, while great for a holster, sucks for actual shooting. The USW-G with the A3T stock is also is noticeably heavier than the Flux thanks to being more aluminum, which means less felt recoil, but more weight if you plan to carry it around. Accuracy of the chassis-mounted optic appears to be about the same for both.

@@DonaldRay666 SBR stock. In USPSA you have to compete with a registered SBR since braces are explicitly not allowed.

@@Jethro3898 I use an MIE Phalanx for OWB.

@ thank you so much!

I was going to ask the same thing

It’s actually a Promag 32 round mag (actually holds 35) that I added a Strike +5 extension to in order to get 41 rounds. The stock spring is powerful enough to feed reliably after more than a few range sessions so I took the spring and follower from an ETS 40 round to get it to feed 100%. I would have just gone with the ETS mag if it actually worked reliably at all. The tube geometry is all kinds of wrong, so I’m stuck using a Promag tube instead.

I think I might have the regular P365XL one.

@ I guess we’ll see whether mine stays reliable lol. Just today I also switched to it for my main platform (M&P) so this will be interesting

@@montizzlefoshizzle7131 I mean there’s no way I could’ve continued like that if I was just shot either. Alternatively, just get good pepper spray like from POM instead. Most people don’t walk around with a giant can of bear spray and a pellet pistol in their back pocket.

@@jakebriscoe Smoky reloads. Fast burning powder like TiteGroup or Win 244 under coated bullets tend to do that.

Excellent work 👏🏻

@@JPFB-yp6pw I’m just waiting on Shalotek to release their 7.5” LC Warden slide without the slide comp so I can run it in CO. Though it might just end up being the same as a fuse slide.

@@AllOuttaNine after shooting the xxlc more. It is a big game changer. I just needed a little warm up I was very rusty. Now it feels like magic. It just makes it quite a bit easier. The dot comes back so fast, had to adjust a little to the new recoil impulse. I’d honestly recommend it!

Slippery slope XL

@@EzraLopezUSPSA I’ve tried Wilson Combat and OEM and that’s about it. My current setup is WC Xmacro for competition and a chopped WC Xmacro to 12 round flush fit mag length for carry. I find the palm swell for the WC XMacro to be perfect for my hand size. For mods, I have the MCarbo trigger spring kit, but I’m using a +20% striker spring from Sig Guy for hard primers.

@@DFogify For sure! Trying to hit M with this thing.

@@davidherrera8734 I’ve had no problems. Try checking your screws, they might be too long and need to be dremel/filed down to the correct length.

@@NavyPistoleer Thanks!

@@AllOuttaNine you shooting Maryland state?

@@NMranchhand Yes

@@EzraLopezUSPSA Ben Berry puts on very good matches! 3rd person recorded in horizontal.

@@cash2active Comp shooting is the way 👍

@@chapmanshooting yeah, I should upgrade to a Glock 34 to reduce recoil 😆

@@ernieelias8692 that completely depends on the weight of the suppressor, the recoil spring weight, and your ammo load. Generally speaking you’ll want as much power in your ammo as you can to cycle your slide because the weight of the suppressor is going to slow down the slide. Having a light recoil spring will help because it offers less resistance to the slide movement, but still needs to be strong enough to bring the slide into battery. You’ll just have to experiment a lot.

@@OMWU When I made this video, it was stock except for a crappy weapon light. Just have proper grip for proper recoil management. Since then I’ve installed the Galloway Precision trigger and spring kit minus the hammer spring, which is still stock. I’ve also taken off the optic and replaced the front sight with a Dawson Precision M&P Shield fiber front sight.

Thanks ​@@AllOuttaNine

@@shuumai My Micro Daggers use Glock triggers with some aftermarket springs and connectors. I only like the Micro Daggers for their grip profile, which offers more side palmswell over the zero palmswell on a slimline Glock. I don’t like the Micro dagger stock trigger.

@@AllOuttaNine do you have a complete G48? I added a Hogue grip to my Shield to get that palm swell.

Not sure why my replies keep getting hidden. Edit: Evidently when I use the word "sh0t", my comment gets hidden.

I haven't tested the P365 AXG back-to-back against the G19 and M&P Compact, but the LOK grip panels alone allow me to get a better grip on it than either of the two.

@@AllOuttaNine mine often disappear as well but I never understood why. Now I know lol

@@AllOuttaNine nice! I have Shalotek’s FLEX module but unfortunately it only comes with G10 grips which are damn smooth. I shoot it with their XXLC and it’s very forgiving. I’ve always wondered how the non-comp’d model feels

@@EzraLopezUSPSA Smooth G10 grips are the worst. Can’t stipple them, can’t machine them either because they’re usually hollow.

@@ernieelias8692 This one was a prototype that Backup sent me for eval and it never went into production. Should be plenty of P365 threaded barrels on web stores, though. It’s a fairly common item.

@@AllOuttaNine ohh okay ,I did see that it was a prototype I thought that was the name lol. Yea so true precision is all sold out and I’m just looking to get my hands on a good threaded barrel ! Just can’t seem to find one right now , any other recommendations ??

No, regular trigger

It’s an OEM Glock polymer mag with a bunch of polymer extension on it.

Didn’t put one on.

@AllOuttaNine Ohh, okay, that's why that happened then.

@@MrMechudo94 My bad,I had a piston on, but the ammo was underpowered.

@AllOuttaNine Oh damn. I didn't know that can happen.

Riton X3 Tactix. It’s a piece of 💩 don’t waste your money.

Nice! How’d you do at the match?

@@AllOuttaNine crumbled a lil bit on a couple stages, under self-imposed pressure haha but the classifier was decent for me! You crushed that one, dude

@@TheShredillacHappens to the best of us! That hardcover Mike cost me an M run if it was a C or a GM run if it was an A 😭

@@AllOuttaNine RIP 🪦

Just trying to be cool like you 😎

You can if it’s an SBR. And yes, the dot isn’t quite as easy to track as a stationary dot.

SWGC just submitted the classifiers. Just gotta wait for the recalculation!

@@AllOuttaNine Yup, saw that. Looking at them, you should be in.

👏👏👏

BattleSteel MOS 1913 rail adapter and a Monstrum Shrapnel medium optic mount for RMSc.

@@AllOuttaNine How is the offset and zero ? I run a holoson 507c on a gen 4 mos. I only run it in PCC defensive pistol matches but is also the bed side gun.

@@daviddominiecki9522 It’s held zero so far. Much better than the Strike rear sight mount I tried and the Glass Breaker optic mount from Recover. Height over bore offset is about what you’d expect from a regular PCC optic mount.

Did you use the strike industries mount?

@@daviddominiecki9522 I still do.

@@daviddominiecki9522 I use a BattleSteel MOS to 1913 rail adapter plate, then a Monstrum Shrapnel RMSc optic mount.