Видео

My blade in the middle is is about 3mm above the other two and I get that same little stripe like you showed

Whats this called

You need to adust your detacher, so that both front and reae tines are touching the grass at rhw aame time/ level.

You only showed us you sharpened them, but you didn’t show us how to fix the problem

What setting do you use 1,2 or 3 i just have take off 1 blade on toro tightened to 65lbs

You could make a shield with light gauge steel to cover up the deck rise and lower mechanism under neath. I just got one for my Mother and they told me to push the deck lift foot pedal and take some tension off the deck before adjusting the dial raise and lower knob. Maybe try that before turning the knob!

What is that system you used to sharpen your blades...looks awesome

You need new blades

Love it! Thanks for sharing ❤❤❤

What is the tool or the vise where you set the baldes for re-sharpening?? Where can i get that??

Great video, but I won’t be spending bout $250 on a balancer. Thanks for the info though.

I think it's a 24.5 hp engine. 27hp is the fx801v

👍👍👍

The new 6 Pack Bags Innovator 800! Holds 8 meals and has tons of ice packs and plenty of space for other things!

I never mow when it's even a little wet. I know if you do it for a business, you need to, but for people just mowing their lawns, don't mow when it's wet? Unless you live in England, you should have plenty of dry days to mow and not worry about the deck getting gunked up.

which model do you have ? ... you just say, They have all of these ....

$216 for the balance tool mounted to the wall! Wow!

Wow, a $200 blade balancer.

I want to get to this level of skill😂

Late Spring stripes are on 🔥🔥

Never sharpen your lawn mower blades razor sharp sharpen them at a 30° angle and the edge of the blade should be 25,000 radius.... The first quarter inch of your blade does most of the cutting... Make sure your deck is level from side to side in the front should dip down a quarter inch lower than the rear... That's The Sweet spot...😊

Back in the good old days on eighth of an inch run out on your mower blade was the limit of run out that was acceptable.... So don't be throwing. . away a good blades... I'd like you to know the standard of run out still applies to modern day so that way you won't misunderstand what I said... A blade can have a 1/8 inch run out..😮

That's good. Unless you have a bent spindle.

Bearings in spindle let go and the blade shaft dropped down lower then the other blades

I like the simple green idea, first thing I thought though was I'm using a pump up sprayer to apply that. Thx for the video!

Absolute rubbish about a bent blade leaving ridges! You are using a ROTARY mower,ergo the blade/s rotate in the horizontal plane, therefore the low AND high side of the blade/s both pass over the area of grass multiple times as you mow. A bent blade will result in an uneven cut if you rush the. Mower! II too am in my 70’s and have been cutting grass for over 50 years!

i look at a lawn like yours and wonder what would bend your blades. something much easier and faster is check tire pressure. you probably have a flat tire. 9 out of 10 times it is a low tire not a bent blade

You wouldn't run out of gas If you look down at the sight glass for the gas😅

I have the fs91 with the speed feed head and guard on. The line does not meet up with the line cutter…. It will not cut the line. Any input? Thanks!

I have the exact same balancer and just love it! It moves so freely.

For 12 dollars a can, I will clean my deck by hand.

Enjoyed the videos, bent blade & fire pit. The blade balancer? Name & brand? The building is just like mine, I have a 12x20, but different color. Got it from Amish builder in North Carolina through dealer in SW Virginia.

Great review just picked mine up today I already love it I need to change the trimmer line though I’ve been using the ECHO black diamond line and I love it

Great video. Very helpful. I use Dewalt myself big fan.

I use used motor oil and lard. Just put some lard and used motor oil in a container heat it in a microwave stir it up to make a paste then brush in on. Works great.

Which trimmer do you like better? The Stihl FS91R or the Husqvarna 324L? Can you do a comparison between the 2?

Gonna do another update video? I'm about to purchase a Z412KW-48 for residential use and would like your opinion of this series mower almost three years later.

where did u get the jack

Had mine 5 years and learned things from this video I never knew! With you totally on the height turn dial, BTW, that can be a PIA.

My question to you..? Does Fluid Film Dry … 🤔 I used Blasters Surface Shield on my 46” deck had same results as you … went ahead pressure washed deck & re-applied Blasters Surface Shield ..! I live just west of. Chicago so far 2024 mowing season we had a lot rain so far mowing 2 times a week to keep up mulching my lawn each time I had clean underneath deck … my Mower Blades are Gator 3 Mulching Blades by Oregon.. Great Heavy Duty Blades I highly recommend..! Great Video..👍🏼

About to maybe get this, how do you get more like out as you’re working? I know some string trimmers have it where you press it on the ground and the spring lets out line. Thanks!

Screw that! A stihl bed edge redefiner on a kombi, a blade edger on a Stihl Kombi or Echo, Shindaiwa... Give us an update if you are still in business 'cause who in the hell has been paying you to waste their money????... and your time.

I got my machine in Thurs. I love it. It's had .3 hrs. It's 7.4. I will change the oil filter tomorrow

It's a kaw. Engine. Not a a kouler😢

Thanx

I have been using auto ceramic spray for years on my mower and snow snow blower. It works great and only needs a spray about twice a season. Cheap and easy.

.....tell me how u grease the front castors and deck spindles

Tell me where the grease fittings are 🤔

What's a shitstack?!😂😂😂

I severed my relationship with Amazon so I'm going to try to find this locally at my Gravely dealer.