Видео

Thanks !😊

Thanks for the review...nearly bought one, but had a suspicion it wouldn't be any good. The TV sales hype nearly got me! You saved me a few quid, ta!

Best review of a product I have seen in a long time, keep up the good work 💪💯

I have exactly the same problem and so far no solutions. Please let me know if you found a solution and I would do the same

A great protection against rust, salt and crap off the road !

Hi, Glad you got your replacement. I had an identical problem to yours and it took me 4 months to have Banggood replace it. The replacement is exactly like yours. However, I have a problem that I have been unable to solve so far. What is the startup procedure that you use with this version? I have tried all sorts of switch positions and while the controls are there, I simply can not start the motors. Any suggestion from you would be greatly appreciated. thank you 😀

I don’t even understand what he’s talking about apart from amazing

The ice boxes u get with it do u put water in them and put them in freezer then put them in the bottom water tank with water in and it chills the water or do u put them in fridge then put them in water tank? And do u fill up the water and ice cubes in top part I’m unsure how works as I have one only just got it and instructions are not the best can u do a video showing the little ice tanks etc and what to do with them and where they go in the cooler plz

You most likely got a dud with all kinds of quality control issues which most of these chinese companies are known for,if you had of got a good one your decision would be much different.You should have got a refund.

Hi

Дякую, шановний, за огляд!

looks good. bought after watching your video. thank you friend. but want you to know. you bought the basic version, which was not the 95000pa. white=basic silver=pro

please tell me you're not seriously surprised that cheap chinese rubbish is just that - rubbish.

its not banggood selling it its another person that you are buying it from, banggood is just the website they sell it on its just like amazon anyone can sell something on it.

2:04 asking for stuff telling you will put make " a nice video " and then saying it's shit. mate dont sale your soul. what if they complied to that but that was still a shit ? i'm disapointed that RC world is like that now. send free stuff i'll say it's great i'm done with the video here :)

There was a time when bangood still sold junk, but they would send you new shit no questions asked.

you pay your momey . you take your chance bud

£275 you really should have gone for a DJI mini 2

The ONLY JUNK Bangood sells IS THE JUNK YOU BUY silly, you clicked on it, you reap the rewards good or bad its on you. A Small Man would say something as this

u should not have to repair it when its new

it is really painful and i feel for you i can tell you are a maverick pilot the product itself is marked I think it is marked by copy right and or patent regulation it could also be radio interference around your area A developer must have copied VTOL design without permission The Developer must have tested it in his or her own area and it worked fine The trouble about business and design is the ACID test Its like football away match We all know everything is perfect at home even when it is imperfect My other guess is that you were singled out to fixed the problem for them They know fully well that you are a developer so they set you up. They painful thing is that they do not want to pay the money associated with such development which could run into hundred of thousands if people were employed formally to do so. I refer to the usual suspects who work in the city and do less but get paid millions You and I are the dummies The use us to make millions I know you and I can fix it however its not what or why we buy things i know for example that the gyro is damaged I know that the control board firmware may have lost integrity and needs to be reflashed furthermore the blade orientation could be wrong and or motoration the speed between both motors should also be even and thus we are talking speed controllers and a faulty motor maybe. it can be made perfect however at the expense of your privacy and cost. When you are done fixing it they rip all the benefits you do not look good enough to be paid thousands I have learnt that we are being played It is in the name of God that I inform you that some of my developments are being sold at Banggood may not even know the origin of the good however are relaxed with whom the let set up shop with them I am really sorry and feel your pain, Only if we did look like Tom Cruise or Brad Pitt it would have made a lot of difference Sincerely Ejike

I need this for free because I am so poor

Thanks for sharing this, was looking to get this for a while but now I see it's just a two rotor joke..

Good luck, asking Banggood anything. They lost an item I bought in the post, I've asked for a refund... no chance. AVOID like a C-19 vax! 🤬

Sounds like the receiver is in binding mode

oke, it's works!

Try move left stick to right side and right stick to left at the same time. - or both sticks down. Even try combine other directions.

What model is that?????

could it be that your throttle needs to be at 0 to be able to "arm" the motor? that is why it screams, you need to put the throttle at 0 ( left stick down)

I got them I loue mind

Interesting looking little bi-copter, but a bit hopeless if it doesn't do anything. I found it online, and the manual listed there talked about this whole complex way of starting up for a non-GPS flight which was "The use method of no GPS manual flight mode requires that the 6-channel unlockingswitchisinthe 1 position, then the throttle is pulled to the lowest position, and then the 5-channel modeswitch is turned to the 1 mode. When the 6-channel unlocking switch is in the 2position,themotor will start to operate after unlocking. At this time, the throttle can be increasedtoflyinnoGPS manual mode. The flight mode can be switched after unlocking, and the 1-modeforflightin normal manual semi-automatic mode, 2-mode for fixed altitude flight assistedbybarometer,3-mode for emergency landing with one key at current position. Attention! The 3-modeisnotrecommended because the aircraft will land rapidly at the current position." Helpfully enough, the radio featured in the manual looks completely different. The only reason I mention this is it would seem likely that the GPS mode is stopping you from arming when there's no sats locked... so I just wanted to check you had non GPS mode arming correct. The online manual talks about holding down the throttle whilst flicking a switch... but you may have a manual that actually features the radio you have!

How much did you pay for your helicopter drone? I'm interested in getting one...

They disconnected on purpose from manufactures too complicated for some ppl 👍

Said it would be gps in transport they not put in safe enough nad manufactoring 👍

It's your gps be disconnected while in transport 2 second job

ruclips.net/video/87LMmIWsCZM/видео.html

I am in Germany and I have the same issues. Just received it 4 days ago.

Hello rabone...I watch a lot of helicopter videos to help me with mine...I've noticed most radios arm the heli by moving both sticks down and out ..this will arm the motor..hope it works

By looking at another video in german, it seems that you must push the left hand stick (trottle) all the way down (towards you) and then flick the right hand switch. Be carefull, if so unsure about the reaction of the model, I would definately fix it down to some heavey weight with tape not that it all of a sudden takes off full speed and you crash it! Good luck and all the best wishes. Markus

Try mpving both sticks to their outside positions. If still no luck try moving left stick to bottom left and right stick to bottom right. Many drones / aircraft start this way.

Move both joysticks back to the center. This is how I start my drone.

Hi Dave hows the leg going

What are you doing dave

Hi nice machine can I ask where you got the motor from please looking to upgrade mine

props to wayne. What a gent

I have this for a year and very pleased with it. The side fan on the print head made noise recently but it solved itself after 1 minute. Maybe need some oil.

that is cool

good video love your content keep uploading

Great clip my friend do you have a link or can you tell us where you buy these machines, Thanks, Chris.

What is it that? Battered fried chicken? Looks quite tasty!