Видео

Thank you for sharing Leon 👍 I appreciate it and I hope others do too

​@@Beginner-locksmithno problem. Did those gtl blades get discontinued? All I can find are those xhorse universal key blades set

I don’t think so. I believe there the same thing. www.key4.com/universal-flip-blades-set-gtl-xhorese-keydiy

​@@Beginner-locksmiththank you.

No problem man 👍

Thanks for watching 👍

Also bro, I have lonsdor k518. It fails me all the time as well. I wouldn’t get one if you were looking at lonsdor

Well the reasoning it lets me use it as a emulator for certain Toyotas and Lexus. Thanks for the tip on Lonsdor, according to my friend it’s only been useful for Toyotas and Subarus for him. Thanks for watching my content 👍

Thanks for the tip 👍

Thanks Matt 🙏 Your right we all have to start somewhere 👍

I hope you showcase it on your channel soon 👍

@Beginner-locksmith I seem to get nothing done in a hurry anymore but I'm trying, lol.

I’m surprised you don’t know. Please look into it your customers will thank you 🙏

I’m sorry I don’t understand your comment

Ali express I think

Yeah this was my worse video when it came to audio. I used different editing techniques but big fail so I went too normal other videos. Thanks but if i purchase anything for the channel it’s because it produced income through it, i more do this for fun tbh. I am honored you enjoyed my content 👍

Good to know 👍 Thanks for watching my content 🙏

How many car service you make a day

@@martinrodriguezjr780 most I’ve personally I had is 5 a day but varies

@@Beginner-locksmith good for you is good a long as you're making money it's a blessing thank you 🙏

Thanks bro 😎

I’m glad you find my channel helpful ❤

Thank you for the advice bro. Your right, partnerships should have mutual respect. I have to remember to keep that in mind 👍

​@@Beginner-locksmith at 12:32 in the recent video titled "PSA: How to Overcome Locksmith SCAMMERS" with Andrew McColley - LOCKSMITH LIVE PODCAST, the guest says he doesn’t promote himself as much with business cards but keychain dongles have been amazing for him

Thanks for the advice I’ll check it out 👍

Thanks Matt!!! 😃 Very true 👍

Thanks man 😎 For watching my content. I will keep at it!!! Yeah I understand they are probably like that with everyone and as people there fine. I would have a beer with them but I’ll probably stay away from partnerships with them, I think in general 😅 but will see.

I will remember that 👍 Thanks for watching my channel 🙏

@@Beginner-locksmithI like the speed of your speech! You show things efficiently, some people waste their time with talking too much. Great free content, helps me and I’m sure others!

@@doneriteservices2313 thanks man I’ll still try to improve regardless 👍

Thanks man 🙏!!! Will do!!! Been busy but be back soon!!!

I’ve had lots of success with the Toyota XM38 versions. I’ve never used the normal XS ones successfully but lately I lean towards the autel keys for push to starts anyway. On the Toyotas and Lexus I have successfully used the key tool max pro successfully.

Bueno, me centro en los coches asiáticos y estadounidenses.

Well it’s one of those things that’s hard to explain through text but I’ll try. What lishi or lishis you practicing with? What car or door locks you practicing on?

@@Beginner-locksmith wow tnx for your reply,,,it 08 ford ranger F038,,also nissan armada nsn14,,tnx again,,,

@@Beginner-locksmith im using the original lishi,,,

Tip 1. On both cars try practicing on different locks. I remember on a ford I could only get the tailgate lock too work for some reason. Tip 2. Try picking different directions. Even if it’s too lock the car you will be able to decode it. Also sometimes people just have easier time picking a certain direction before they can pick all directions. Tip 3. Don’t use too much strength while picking in fact use the minimum amount you can.

Also there are multiple nsn14 Do you have the 8 cut or 10 cut? Generally the 8 cut works better.

Well the xm38 generally can do what the xe can do but the xe can’t do what xm38 can do. I hope I understood your question and answered correctly.

@@Beginner-locksmith Thank you. That explains that after I add the XE non xm38 key into a 2015 Mitsubishi Lancer GT CVT, all keys such as the OEM key appear to program using the KM100, but at the end of the successful complete message, no remotes work nor can the engine start. I have a XM-smart Key on order and will update this thread so that fellow viewers will see it. Thank you for great videos.

Unsure what going on there but good luck on your job 👍

@@Beginner-locksmith Got the XM38-smart (XSCH01EN) key today and generated the key with the VVDI mini for 2015 mitsubishi lancer GT which comes with a Semi-Smart Proximity key and turn to start column mounted Off/On/start. The KM100 was able to program the Key to the vehicle. my mistake originally was using a non Xm38 XS series key.

@@TheRealoldcar awesome 😎 I’m glad you figured it out!!!

There called auto smart books

I personally do prefer auto that being said I may do residential later on. I don’t really want to do commercial though.

Thanks for the support bro 😎 Hmm good question, I don’t necessarily know. It’s always good to find a deal but I think it’s more to find some one who honors there warranties or combination of both. If you buy it from a back water website if it breaks your probably not getting your money back. I personally buy items from reputable supplier. I like key4 and American key supply.

@@Beginner-locksmith Thank you, so you recommend uhs hardware?

@@doneriteservices2313 I will never order from them again

@@Beginner-locksmith do you mind me asking why? I did notice they have inflated prices

@@doneriteservices2313 I don’t know anything about prices. When I started made an order with them and they took forever with it. I ordered small amount of things. Got my orders in pieces and I had to keep hounding them to do it.

Thanks for the tip ❤️ All though I’ve been debating on too get it or not but I’m still new and it’s a hefty expense but the key codes and other stuff makes it worth it. Is there an actual timeline because supposedly it was already supposed to come in effect if I remember correctly.

@@Beginner-locksmith there trying to get rid of old stock because they know the sales will go down. So there dropping prices on everything

I’ve noticed that too especially with xtool. There getting pretty low.

Hello I took classes in the California institute of locksmithing. Thank you for subscribing 🙏 and good luck on your journey!!!

@@Beginner-locksmith California institute locksmith

California institute locksmith class how is it recommended

I’m sorry can you rephrase the question?

@@Beginner-locksmith I mean if you recommend California institute locksmith class online so I can check it out thank you sir

Hey bro 😎 I just checked it’s there but I probably cloned the chip using a super chip and programmed the remote through OBD.

It’s only ever let me down in the past too lol 😆. Right now I have the little brother versions of those km100 and key tool max pro👍. For my small operation they been great I hope too soon at grow them though !!!

My apologies these books are made with the US in mind and they have been discontinued. I’m sorry I can’t help more.

@@Beginner-locksmith understand thankyou

That’s awesome 😎 keep us posted on your journey !!!

Thanks Leon 👍 Awesome the black widow, that’s a great machine!!! Let me know how it goes bro!!!

​​@@Beginner-locksmiththe black widow is working great. And I just learned that the KTMP doesn't have the emulate remote feature that the KTM has so that was kinda disappointing. Anyway quick question for you, what do you do when you go to program a key to a vehicle and the battery is dead. Is it fine to just hook it up with jumper cables to your vehicle or do you need to use some kind of battery maintainer thing?

@leonmatvich5059 I’ve used both but the most popular method I send the customer packing to autozone while I chill lol 😂

I’ve never needed the emulator tbh I’ve generated keys to test stuff I guess slightly more work but still minuscule

@@Beginner-locksmith so it is fine to hook up your jumper cables?. And what maintainer do you use or recommend?

Key4 bro

It’s coming Matt lol 😆

I bought mine at American key supply 👍

Honestly bro I don’t know where to get them now 😅

In many ways I do agree with you 👍

Thank you for the advice!!! I recently learned I need to expand on my lockout gear!!!

Yes I have learned to clean keys before decoding and I learned the hard way by cutting so many unnecessary blanks 😂 Thanks for the advice ,compliment and support 🙏

American key supply

@@Beginner-locksmith Ok. Thanks.

@@Beginner-locksmithhi I’m only just starting I’m in Australia can I buy a km100 online and use it in oz or do I need an Australian version ?? Thanks

@Tony-w8s5s I legit have no idea mate😅 I would call Autel support and found out there pretty good 👍

@@Beginner-locksmith thanks mate

Yeah I remember you bro 😎 We had a great chat and yes I prefer local even if I pay a bit more. Every thing I order is here the next day from my spot. I’m glad I can help!!! Look forward to seeing you on your journey

You feel my pain 😅 Honestly 500$ plus dollars down the drain and I bought it around hype too 😂 man I wish I could have gotten refund.

@@Beginner-locksmithyeah I feel u I paid almost 3k for the topdon smart and t ninja box

Oh nooooo😅!!! Well since the T-ninja pro usually fails I’m going to have it attempt to program keys and catch it on video failing. Sucks the first time I record it does something right but it’s a Honda a basic car.

@@Beginner-locksmithyeah I agree I to will me making videos soon to show what tools work and what don’t I have most of them OBD star all of autel tools Xhorse tools Lonsdor …

@DavidPetrisor awesome 😎 Will it be under this account that I’m talking to? Or if it’s a different account Comment it Down here and I’ll subscribe to check out your videos when you do 😄