Hey Joel - working on a clutch replacement following your guide. I’ve gotten the transmission off - but only have about 4-5 inches of working room to remove the pressure plate, clutch and flywheel, can’t push it much further back on the subframe. How did you remove the clutch and reinstall while following proper torque procedures without dropping the trans? Would like to replace the rear main seal and flywheel as well while im in here
Hi Joel... Your video title says 2014 Fiat Pop but you say 2013 in the video. I have a 2013 Fiat 500 Sport that needs clutch repair due to screeching. Is it the same process and parts as your car in the video? Thanks, Brian
Hi Joel, just hearing you go through the job reassures me that the green Fiat 500 Pop I have in my yard with about 60K miles will be OK - just need to do the clutch but the local shops wouldn't touch the car because of fear. I'm going for it. I paid 1500$ for it with 45K miles I think about 3 years ago, the clutch failed 9 months ago and has been sitting. Sat at the shop I bought it from for 2 months, they said they lost staff and couldn't work on it - claimed they couldn't get the clutch! So after a 900$+ rental bill for the mini van they rented me, I towed the little car home. Now, the weather is warm and I am ready to get my hands dirty and a few busted knuckles. Many thanks!
Please help me out...I have a 2012 500 pop & ordered the clutch kit, which came with the 3pcs..pressure plate, throw out bearing it did not come with the alignment tool & can't find it
Thank you for sharing. I’m having the same problem. And now I’m looking on you tube on how to fix it my self. This was a lot of help. Im going to get the parts. To do it my self. If I need any help I’ll reach out to you. Thank you.
I just had clutch work done on my 2012 Fiat 500c. After it was repaired, the car runs great, but there seems to be more road noise. I peeked behind the plastic cover to the immediate right of the driver's foot and could see below to the ground. Do you think there is some plate or panel under the cabin/center console (to protect the cabin from road noise/rain/snow/stones etc.) That the mechanic neglected to replace?
Hey sorry guys I know is has been a while, anyway I still have the car nobody here in california knows how to drive a stickshift car, can sell the darn thing is just park it in my driveway. And is been there since I fix it .
I have a 2012 500 Pop I ordered the clutch kit it did not come with the alignment tool is there a way that I can use something else cuz no one seems to have it I cannot order it anywhere I've been missing work for 3 weeks please help me
How's she holding up? Can't decide which is better, the Turbo Abarth accordion shaft cylinder throwout slave and bearing, or the fork and pivot rod style in the N/A Sport?
love the can-do attitude!
Hey Joel - working on a clutch replacement following your guide. I’ve gotten the transmission off - but only have about 4-5 inches of working room to remove the pressure plate, clutch and flywheel, can’t push it much further back on the subframe. How did you remove the clutch and reinstall while following proper torque procedures without dropping the trans? Would like to replace the rear main seal and flywheel as well while im in here
Thanks for all the info
$1100?! Fkn-A!
Hi Joel... Your video title says 2014 Fiat Pop but you say 2013 in the video. I have a 2013 Fiat 500 Sport that needs clutch repair due to screeching. Is it the same process and parts as your car in the video? Thanks, Brian
Hi Joel, just hearing you go through the job reassures me that the green Fiat 500 Pop I have in my yard with about 60K miles will be OK - just need to do the clutch but the local shops wouldn't touch the car because of fear. I'm going for it. I paid 1500$ for it with 45K miles I think about 3 years ago, the clutch failed 9 months ago and has been sitting. Sat at the shop I bought it from for 2 months, they said they lost staff and couldn't work on it - claimed they couldn't get the clutch! So after a 900$+ rental bill for the mini van they rented me, I towed the little car home. Now, the weather is warm and I am ready to get my hands dirty and a few busted knuckles. Many thanks!
Please help me out...I have a 2012 500 pop & ordered the clutch kit, which came with the 3pcs..pressure plate, throw out bearing it did not come with the alignment tool & can't find it
Thank you for this. I just got quoted a price of $4,000.00!!!! I looked at them like they were alien's!!!
Bro same , currently ordering parts worth 900$ and doing it myself
I’m starting-block right now on my 2012 fiat 500. I’m scepictal but I want to try your metod 👍🏻
I have a 2012 fiat 500 Abarth I need help doing that the shop want to charge me 1300-1500 to do it
is not hard to do a clutch job on that car let me know if you need help.
I guess by now you did you clutch or got rid of the car.If you paid the 1500 it's worth it the job is very labor intensive took me 3 days +
Thank you Joel!
Thank you for sharing. I’m having the same problem. And now I’m looking on you tube on how to fix it my self. This was a lot of help. Im going to get the parts. To do it my self. If I need any help I’ll reach out to you. Thank you.
I just had clutch work done on my 2012 Fiat 500c. After it was repaired, the car runs great, but there seems to be more road noise. I peeked behind the plastic cover to the immediate right of the driver's foot and could see below to the ground. Do you think there is some plate or panel under the cabin/center console (to protect the cabin from road noise/rain/snow/stones etc.) That the mechanic neglected to replace?
Yes, they forgot to but it back.I have a 2013 fiat sport
Hey sorry guys I know is has been a while, anyway I still have the car nobody here in california knows how to drive a stickshift car, can sell the darn thing is just park it in my driveway. And is been there since I fix it .
@@duke9620 yup bolt ons and a tune. she will rip.
@@stonar6323 thanks man I dont really need it so the car still for sale hopefuly some one will buy it .
I have a 2012 500 Pop I ordered the clutch kit it did not come with the alignment tool is there a way that I can use something else cuz no one seems to have it I cannot order it anywhere I've been missing work for 3 weeks please help me
$2700 for clutch job is crazy. Which clutch brand did you use?
I have the same exact year, same exact exterior color, same exact mileage, same exact issue.
Hey buddy how do I contact you ?
How's she holding up? Can't decide which is better, the Turbo Abarth accordion shaft cylinder throwout slave and bearing, or the fork and pivot rod style in the N/A Sport?