Видео

Hello, no one anvil from normal brand is plug and play. There are 2 options aliexpress or what I sent you, what is made by one company but it's copied aliexpres with better quality.

@xtp6969 Thank you!

dom.bazos.sk/inzerat/172299631/upinacia-nakova-12-pre-parkside-performance-pdssap-20-li.php

@xtp6969 Thank you!

Dobry den, do slovenskeho bazosu ked zadate nakova a PDSSAP tak vam to najde

@@user2838-j4i i am not possible to understand what you are meaning.

Elnézést,nem jó helyre küldtem.

It means: Definetly not real​, that this machine can handle that. @@xtp6969

@@user2838-j4i?

@@goshochernii yes

This has 35 torque levels. Problem is described speed, should be 2000 and real is 1280. And no brake for chuck.

Lithium or calcium grease, color is on you.

@@xtp6969 temp range?

@@jetfulvio lithium or calcium have similar temp range, you can use NLGI 2 for sealed ball bearing. I'm specify using : Verila Li Complex EP 2 PTFE Green

Ahoj, najlepsie kovany orech CR-MO oznacenie materialu

@@xtp6969 díky za rychlou odpověď, takže 1/2 aby šel na ten šestihran 1/4 ? Děkuji

@@zdenek0909 No ved to zalezi aku mas utahovacku? Mas ju v original stave 1/4 sesthran? alebo prerobenu na 1/2?

Ano, mám 1/4 šestihran

C3

ahoj, msvehla@gmail.com kludne aj do fb ked to zadas ma najde

I dont understand with what you tested it? I hope you didnt test it with linear torque meter :)

dipende quale, io provai la pistola "verdona" da 400nm e la riportai indietro. Stretto una vite da 17 a 110nm non riusciva a sbloccarla.. Viceversa ho preso di recente una pistola parks.prof. tipo 12V (cap: 350nm) ed effettivamente i dadi sia li stringe che li molla (ho fatto una prova con la frizione (dado da 30) della moto che con l'asse post. (dado da 32 o 36 non ricordo). Posso immaginare che quella nel video sia la versione plus ultra essendo la 20V da 1356/1800 (avvitamento/svitamento Nm). Considera però una cosa: la forza applicata è "relativa" nel senso che è dovuta dagli "smartellamenti" interni della pistola ripetuti x-volte nel tempo. La coppia reale della pistola è abbastanza bassa anche perchè alternativamente ti strapperebbe un polso. Mi spiego con un esempio: la pistola che ho stringe roba da 30-36 e funziona effettivamente, ma se stringo la bussola con la mano non si muove di un mm. La coppia reale sarà sui 30-35nm max ma applicata x-migliaia di volte al minuto (Come un motore auto dove il botto da un impulso di coppia all'asse rotante, poi ne arriva un altro, poi un altro...)

Aggiungo: ogni tanto buttano fuori un trapano percussore (non svitabulloni) elettrico portatile a 20V. Bene quello per usarlo ha una impugnatura addizionale trasversa prima del mandrino. Il motivo è che va impugnato a due mani come fosse un flessibile altrimenti la torsione (che rispetto al flex è assiale) ti torcerebbe via il polso in quanto non ricordo di preciso dovrebbe avere tipo 60Nm di coppia. Questo con 60, figurati se fossero 100 o più. Come se il trapano a 220V bloccasse la vite di colpo: si pezza la vite o ti vola via il trapano (o ti spezza il polso).

Never had this problem

@@xtp6969 Avvitatore e quello piccolo a 12 volt da 30 nm. Il motore brushless scaldandosi e non avendo il proprio guscio in metallo ma si regge su plastiche interne di avvitatore li ha deformati e facendo questo il motore non girando più perfettamente dritto si è bruciato. La parkside deve fare i motori brushless con un proprio guscio metallico e resistente come lo fanno le buone Marche sugli avvitatori.

@@MagoDelTaglio that is problem of parkside manufacturer, not problem brushed vs brushless. You know it is still manufacturer which sell food :)

I have c3 version and i have needle bearing and no problem without any play. Agree with trigger, thats piece of shit, my dewalt, makita, milwaukee etc wrenches can do slowest speed something around 100rpm and parkside is 700rpm....

@@xtp6969 wonder if you can do som som about that trigger, like parts swap? but doubt that will do anything bc of software

@@meddis4647 if it should be in trigger, price for change from some brand like dewalt will be very high, now is 'on sale' price for tool in our country 39.99e

Hello, It isnt written anywhere in description of anvil, for more information you need to contact Dewalt Factory what they are using for it (I think it wont be not public information)

in mobile I'm using xtool a30m, but every these types are similiar what you can do with them and I have 3 other diagnostics in PC type of Delphi and Autocom.

I did, b3 isnt stronger. Right now i dont have torque wrench above 350nm, so i tried it in style 350nm + degrees tighten and they have very similar power but c3 is faster in loosening nut

@@xtp6969 weird that C3 is faster when in every test on youtube its slower than B3

​@@dinkoprotrka1445 its not weird, b3 is maybe faster by rpm, but should has more light hammer mechanism. Videos on yt test only long screw and that is rpm (when i am using them i think b3 has more rpm) , but if is difference in weight of hammer, more heavy hammer will loose nut easier, someone could measure rpm of both tool (i ordered laser meter)

@@xtp6969 more rpm under load meaning more power

@@dinkoprotrka1445 if onetime you will try to test nut busting torque, you will understand. If is difference in rpm for example 3000 vs 3200, there is no power difference. Its same like drills, more rpm (if is enough power) will be faster.

Maybe your tool will have some defect, right now I watched video of C3 version from ZONA ALATA from 6 hours back : ruclips.net/video/R8pb1XlPK8M/видео.htmlsi=At7mBjMogInBFioX and he loose 550Nm , like I said.

if something will happen you have warranty

@@xtp6969 probably he means because of the 1/2 tuning...

@@xtp6969 but when you mod it you lose warannty

@@josiplacic1230 why? You will give back original anvil (10min of labour)

yes I saw last week, I tried to wrote you through facebook messenger but without answer :D is possible to write with you about that?

ruclips.net/video/7Hq0pft1V70/видео.htmlsi=cZW5BrxtsBGjFflu this is my video with 350Nm of torque

I dont see difference between them. It sounds like B3 has little more rpm (i didnt measure it). If price will be same, i will buy B3, but 25€ difference is much better C3.

@@xtp6969 for me price difference was like 17€, I don't have 1/2 anvils yet but using bits my b3 is much better, while c3 struggles on 14kg 17mm wheel bolt b3 does it with ease

@@meddis4647 what is 14kg? 14kg/m ? like 140nm?

@@xtp6969 yeah 140nm

@@meddis4647 that strange, i didnt tried it with adapter, but 350Nm on bolt with 1/2 anvil is same power, I dont see difference. I didnt tried more, because I dont have large torque wrench anytime

Hello, inside diameter of aluminium head is 22mm. Inside diameter of sleeve or bearing depends on size of anvil what you can buy

where are you from?

@@xtp6969 North of France

@@ghost-alpha-i1z i'm from slovakia, I think postage will be expensive. Kit for upgrade is 50€

​@@xtp6969 I paid €49 for the machine so I think I'll leave it as it is and . but thank you for your answer good evening friends handyman

Yes but I dont know if its useful to order it to another country. msvehla@gmail.com

disassemble, make it and done :D

makita, dewalt, china, milwaukee, okrem toho, ze ho kupis musis ho upravit aby tam pasovalo

jasnacka msvehla@gmail.com bud napis mail alebo ma pod nim najdes na fcb

Disassemble, buy 1/2 anvil, make inserts, modify anvil and done :)

@@xtp6969 bonjour ou trouver toutes les pièces pour faire la modification merci

@@Sam34200 anvil you can buy from china or some brand like makita, dewalt, milwaukee etc aj other parts you need to make with lathe.

In stock is there 1/4 hex , and now is 1/2 square anvil. It's a impact driver modified to impact wrench

@@xtp6969 thank you good job.

it would be possible to have a video of the modofocation please

@@sabarb9034 I dont have that video. dom.bazos.sk/inzerat/137899330/parkside-performance-pdssap-20-li-b2-uchytenie-14-12.php

yes, i gave gasket under throtlle body in opposite side. check if it's correct mounted

What was the problem?I don’t think a throttle body gasket will cause this noise?!