- Видео 103
- Просмотров 137 582
Just Hardware Sound
США
Добавлен 28 июл 2020
Diving Deeper: A Full Deep House Track, Using Only Hardware. Yamaha Rm1x, An1x, and AW1600.
Take a deep dive into the world of hardware with me, using only a Yamaha Rm1x, An1x, and AW1600, to go into the depths of this deep house track. Other than drums, everything you hear is from my Yamaha An1x. This track uses 7 separate An1x patches, as a multitrack recording.
Some of the An1x synthesizer programs are available for purchase at:
www.justhardwaresound.com/synth-presets/an1x
Like, subscribe, share, and comment!
Some of the An1x synthesizer programs are available for purchase at:
www.justhardwaresound.com/synth-presets/an1x
Like, subscribe, share, and comment!
Просмотров: 141
Видео
Another Improvised Acid Techno Jam! Acid Improv 9. Multi-tracked with TD-3, RD-9, and Minilogue Xd.
Просмотров 28914 дней назад
Effects are from my Aw1600 and A4000. Distortion is from the Aw1600. The video in the corner shows me recording the RD-9, while the main video shows me recording the TD-3. Like, subscribe, comment, and share!
A New Trance Track, Using Only a Korg Triton Workstation. Full Automation.
Просмотров 97621 день назад
The song starts at 1:00. Some programs were custom-made. Like, subscribe, share, and comment! 0:00: Some programs used in this track. 1:00: Beginning of the song. justhardwaresound.com
A New Eurodance Track, using Yamaha Rm1x and Korg Triton. Full Sequencer Automation.
Просмотров 442Месяц назад
A new Eurodance track I created, using my Rm1x as the sequencer, and Triton as the sound module. I used some custom programmed sounds on my Triton.
Fully Automated Dream Trance Track on Yamaha Rm1x and Korg Triton. M/S/H- Going Miles (Original Mix)
Просмотров 3572 месяца назад
The original version of my dream trance track, "Going Miles", sequenced using a Yamaha Rm1x, using a Korg Triton as a tone generator/sound module. Check out the remixed version, on my previous video! Like, share, comment, and subscribe!
A Complete Dream Trance Track, created on Korg Triton Classic. M/S/H- Going Miles (Remix).
Просмотров 3622 месяца назад
A remixed version of a dream trance track that I created, completely on a Korg Triton workstation. I will upload the original version later on, stay tuned! The AW1600 is recording the Triton, synced with midi. Like, subscribe, comment, and share! justhardwaresound.com
Acid Techno Jam: Acid Improv 8. Behringer TD-3 and RD-9.
Просмотров 6072 месяца назад
Effects provided by a Yamaha A4000 sampler. Like, share, subscribe, and comment! justhardwaresound.com
Going Loud: Hardcore Techno/Gabber with a Korg Triton Workstation.
Просмотров 1202 месяца назад
A Hardcore Techno/Gabber track I made using a Korg Triton. I programmed the Hoover-like sound myself. Samples taken from a well-known sample CD- can you guess which one? Like, share, comment, and subscribe! justhardwaresound.com
Twistin' Knobs: Improvised Acid Techno Jam Live with TD-3 and RD-9. Acid Improv 7.
Просмотров 8793 месяца назад
I used a Behringer TD-3 and RD-9, with effects from a Yamaha A4000. Like, subscribe, comment, and share!
Late Night Acid Techno Jam, with TD-3 and RD-9. Acid Improv 6.
Просмотров 3 тыс.3 месяца назад
An improvised acid techno jam, with no previous planning made, and song structure made on the fly. Effects come from a Yamaha A4000. There's a little bit of a resonant reverb tail on the TD-3, that's more than what I prefer, but the video's still worth posting. justhardwaresound.com
More Acid Techno! Improvised Acid Techno Jam w/ RD-9 and TD-3. Acid Improv 5.
Просмотров 3,1 тыс.3 месяца назад
An unplanned acid techno jam, with song structure created on the fly. Like subscribe, comment, share! justhardwaresound.com
Turn up the Heat: Improvised Acid Techno Jam w/ Behringer RD-9 and TD-3. Acid Improv Nr 4.
Просмотров 5 тыс.3 месяца назад
Me, performing some Acid Techno in the 31C summer heat at midnight. Effects provided by Yamaha A4000. justhardwaresound.com
Will it Acid? Acid Techno using Korg Triton Music Workstation.
Просмотров 3554 месяца назад
Like, subscribe, share, and comment! justhardwaresound.com
Trance and Dance Pack for Sequential Prophet REV2 (38 Programs). No Talking Sound Demo. Supersaws!
Просмотров 3534 месяца назад
Take your Prophet Rev2 to the next level, with the best REV2 trance and dance programs available anywhere! We created hundreds of presets, then hand-picked the best of the best, to be included specifically for this soundset! This soundset contains our best variations of the supersaw sound, plus lead sounds, bass sounds, and pad sounds, for trance and other types of electronic dance music! Get t...
Having Fun with a Workstation: A House Track, made using just Korg Triton Music Workstation.
Просмотров 2424 месяца назад
Only internal sounds were used. Like, subscribe, share, comment! justhardwaresound.com
An Acoustic Track on Korg Triton. Using Korg Triton Drums, E Piano, Woodwinds, Strings, Bass, etc.
Просмотров 915 месяцев назад
An Acoustic Track on Korg Triton. Using Korg Triton Drums, E Piano, Woodwinds, Strings, Bass, etc.
A Full Trance Track with the MPC One and Prophet Rev2.
Просмотров 5446 месяцев назад
A Full Trance Track with the MPC One and Prophet Rev2.
Electro at Midnight: An Electro Track, Using Rm1x Internal Sounds and Prophet Rev2 Pads.
Просмотров 4676 месяцев назад
Electro at Midnight: An Electro Track, Using Rm1x Internal Sounds and Prophet Rev2 Pads.
Running Fully Automatic: An Electro Track, using Rm1x Internal Sounds and Prophet Rev2.
Просмотров 1,2 тыс.6 месяцев назад
Running Fully Automatic: An Electro Track, using Rm1x Internal Sounds and Prophet Rev2.
A Classic House Track, Using Only a Korg Triton Workstation.
Просмотров 5987 месяцев назад
A Classic House Track, Using Only a Korg Triton Workstation.
You Don't Need a Computer to Create a Complete Uplifting Trance Track. Hardware-only Trance Music.
Просмотров 1 тыс.8 месяцев назад
You Don't Need a Computer to Create a Complete Uplifting Trance Track. Hardware-only Trance Music.
A Hardware-only Trance Track using Rm1x (Song Mode) , Minilogue Xd, and A4000. "M/S/H- Styczeń".
Просмотров 5319 месяцев назад
A Hardware-only Trance Track using Rm1x (Song Mode) , Minilogue Xd, and A4000. "M/S/H- Styczeń".
Improvised Acid Techno Jam with Behringer RD-9 and TD-3. Improv Nr. 3
Просмотров 13 тыс.9 месяцев назад
Improvised Acid Techno Jam with Behringer RD-9 and TD-3. Improv Nr. 3
An Acid Techno Improvisation with Behringer TD-3 + RD-9. Acid Improv 2.
Просмотров 87110 месяцев назад
An Acid Techno Improvisation with Behringer TD-3 RD-9. Acid Improv 2.
A Uplifting Dreamy Supersaw Trance Track, using Korg Triton Classic. M/S/H- OceanTracer.
Просмотров 1,7 тыс.10 месяцев назад
A Uplifting Dreamy Supersaw Trance Track, using Korg Triton Classic. M/S/H- OceanTracer.
A 90s-style Euro House/Dance track, sequenced with Korg Triton Workstation. M/S/H- Dance Master.
Просмотров 63711 месяцев назад
A 90s-style Euro House/Dance track, sequenced with Korg Triton Workstation. M/S/H- Dance Master.
A Catchy Improvised Dance Track, on Yamaha Rm1x. M/S/H- Groove.
Просмотров 889Год назад
A Catchy Improvised Dance Track, on Yamaha Rm1x. M/S/H- Groove.
A Complete Acid Techno Track! Performed with Behringer TD-3 and Korg Triton. M/S/H- Oxygen.
Просмотров 277Год назад
A Complete Acid Techno Track! Performed with Behringer TD-3 and Korg Triton. M/S/H- Oxygen.
A Complete Trance Track, Created on Korg Triton Music Workstation. "M/S/H- Klimaks".
Просмотров 2,5 тыс.Год назад
A Complete Trance Track, Created on Korg Triton Music Workstation. "M/S/H- Klimaks".
A House Track, Created Using Korg Triton.
Просмотров 827Год назад
A House Track, Created Using Korg Triton.
Very inspiring! Makes me want to experiment with my Fostex MR16, MM6 and Triton Le along similar lines, keep it up, want to hear more. Cheers
🔥🔥🔥🔥
This sounds great 👍
Just dropped on to this. Whoever you are , Keep this going, you're definitely on to something good. I'm 72 been trancing since day one so yeh. Keyboards synths VSTs I'm on it. Takes something good to get my attention. This was GOOD. 10 /10🎵🎶🎵🎶🎵🎶🎹🎹🎹👍 MARK
Nice Jam! Come check out my Channel for my Mixtape Album that I have put out weeks ago! - Art 🤘
Super 💪👍😊
Wow!!! Thx a lot for this Sound!!!
That reverb tail sounds more like pre delay to me. You could probably dial it down below 50ms so it stops being so rythmic. I quite liked it though.
Hello, Is there a way to send their own sysex data (rm1x) to an external DAW? I mean, If I have a pattern or song and I want to send ALL information (notes, volumen and SETTINGS like reverb, delay, etc. I tried it but my daw only receive notes, PCs, Volume, etc but not the settings
🔥🔥🔥
Love the Td3 and Rd9 but your audio is seriously clipping ,,,
Distortion and compression have been added intentionally, for a more gritty/dirty aesthetic to the sound.
Awesome
This is super dope, love it
Great track! how did you get such white buttons on your rm1x? thanks!
www.justhardwaresound.com/maintenance/yamaha-rm1x-restoration
Great work! Makes me want to get after it on my KRONOS. This is definitely inspirational. So many of us fail (for life or time, family or whatever reasons) to be able to really use the true potential of these wonderful tools and maybe we hit only a small portion of what they can actually achieve sonically.
Класс
This is kind of cool, well done! I have a Triton extreme amongst other things, love it dearly.
Cool!
Bloody good work showing the timeless architecture of one of the best synths of all time
Another total banger!
This is absolutely amazing ❤🎉
As I know how hard it is to work with these things I must applaud you for having completed a track in this cumbersome sequencer. :D Very well done my friend. I have the same fascination for deepdiving in hardware. I've had two Tritons and I think two Trinitys. 01Ws and M1s as well and I used to demo the Oasys to customers who never understood how something could be that expensive. Today I've got these Korg synths: DW-6000 (my second one), Wavestation A/D and Korg T3 EX. Recently posted about the T3 sequencer at Gearspace, nobody replied as they are busy there asking silly questions and not caring about what matters in synth life for the diehard ones. Subscribing Now. :)
Is there additionsl external effects or aduio treatment ? Cheers.
nice to see the ole RM1X still has use. when did it come out 1997??!!!
This is amazing ❤ can u please do a tutorial or just a silent video using the song mode and constructing the song? Thanks
Fuck Yeah!!! 🕺
I never heard such a trance from the hardware. That’s insane
Very nice, the perfect trance sound :)
🤯 Now please Open-Air-Thingy, all positive commenters together, a chuck-wagon full'o'drugs and YOU playing that thang all night long! 😎
Just good song 👍
Since you have both, is sequencing on the Rm1x more powerfull than on the new MPC 3 OS with arranger view?
I have not tried 3 OS yet, but both devices have "freedom" level sequencers. Each device does some things better than the other, or things the other can't do. I would say the MPC One has a more powerful sequencer, but the user interface feels "scattered" and less logical, compared to the Rm1x. The Rm1x requires less looking at the screen, and things I want can be accessed more directly. The MPC One requires more digging.
Well done!
How can I locate the different styles on this keyboard
Thanks so much, tjis is what i was looking for. Where can i get these styles on the keyboard. I have tjis exact keyboard too. Please help me
Nice one!
Solid
What's better a roland Jp 8000 or yamaha an1x in terms of trance...?
The Jp 8000 has the supersaw waveform, but the An1x (and most synthesizers) can make most of the same/similar sounds as the jp 8000. I wanted a Jp 8000, but went for an an1x, because Jp's have a reputation for having too many problems from wear and old age.
@@justhardware just recently I was looking forward to get a synth around 1000$ I was considering getting an an1x or jp8000 one of the two what your recommendation out of the two, does the jp 8000 have a lot of maintenance issues due to age...?
@@cnovasalmanhussain751 What I would recommend is for you to watch sound demo videos of both, to see which synth's sounds you prefer. Then watch/research repair videos/articles of both to see if the sound is worth the maintenance required, and if you are comfortable servicing them. You could also consider newer synths, which may not require any repairs, and also music workstations, which can do most synth sounds, and allow you to make a full trance track, all in one box.
That must be the best condition RM1x out there! Puts my yellowing keys to shame....
The "retro brite" process can be used to restore the Rm1x's white keys.
Dope I was messaging around making a trance track before on the mpc I'm a hiphop man but like making the odd dance track I created a nice gated theme using mother ducker ...gonna try a proper system f out of the blue type theme by editing notes in the grid see if I can make it work
❤ Yes Nice one 👊🏼
Great track thanks fo rsharing! The rm1x is such a powerful sequencer! Random question, how did your get your buttons so white?! Are the panted or retro-brighted or something?!
I retro-brited them with cream peroxide developer and sunlight. The knobs cannot be whitened easily, as the the black plastic will get a marbled look, so I put on new rubberized knobs that are more ergonomic to use than the originals.
@@justhardware Great tip, all my white keys have turned to a dull yellow ivory colour.
Massive sound, could absolutely see myself getting down to this at a festival!
I'm happy to hear you liked it!
you're good!
Soon you gonna have whole set and can start to get some groupies mate, congrats🎉
This sounds so awesome! Great job. The TD-3 needs one or two additional melodies to create a more impactful song.
Or keep it short and sweet and cut it back to 4 and a half minutes taking out the second breakdown and buildup part, it has less impact second time. unless the new melody is added. Great acid though and some of the best sounds i've heard someone get out of the td3.
Love it! 👍👍👍👍👍
🚀🚀nice
Its a factory rom samples? Sounds good)
Yes, all were factory rom samples. I think the lead was a custom program I made, using factory rom waveforms.
Wonderful , I love it , great job
🔥