Видео

Thanks for watching! Hope you enjoyed the F-22 Raptor Strike Mission! Took awhile to finally unlock this specific aircraft. If you enjoyed the video kindly leave a thumbs up and don't forget to subscribe to the channel to never miss another future upload! Thanks for all your support and good landings!

This game mobile?

Thanks for watching! Hope you enjoyed the F-35 Lightning II Strike Mission! Took awhile to finally unlock this specific aircraft. If you enjoyed the video kindly leave a thumbs up and subscribe to the channel to never miss another future upload! Thanks for all your support and good landings!

finally, I found someone doing something we can all do not for just a show or Clickbait

How’d you get it to start in a cold and dark state?

What is this simulator called

Nice video! Although it’s an old video, did you have any issues with the cursor not working during your flight? I’m unable to press anything during my flight.

i would like to see your bios settings..i have asus maximus hero xi wifi with a 9700k and cant get my system to be stable above 5ghz..i see you have 5.3ghz.

this is the ultimate guide for all unstable oc s

hi sir, may i know why my xp12, although selected cold & dark under customize but i notice some of them already turned on right after i switch my battery on. for example on the overhead panel the cabin section is all turned on instead of being white

Does this plane show the block time? I only see the flight time

Even though I’m 11, I learn about aircraft systems. So I study a lot and everyday to be prepared for the flight school. I learn how to start engines, how to deal with warning sounds etc. Thank you for the video! Now I know how to start A350! I only knew how to start A320..

Thanks

how can i set the Cold and Dark mode?

I couldn't change my 2x16GB 3600 frequency from 2433 to 3600 I'm wondering why, I have the exactly same motherboard and I'm sure is nothing wrong with the Ram. Any suggestion? My pc is keep restarting since, doesn't what to accept higher frequency then 2433

is it the same for xplane 12

Yo where did u get the A350 from?

Is it necessary to use the inbuilt pushback? B ecause it wont work. I have betterpushback and im using it.

Bro i7-9700 non k supports 4266 mhz ram because I have tuf z390 plus gaming wifi... In Manual they say motherboard supports 4266 mhz is this true

The MCDU of the a350 is ass but I love flying this airplane so much. I hope I'll get used to it one day. Ps I'm coming from the magknight and this is worlds better

hey you must eat lots of carrots so you can see well in the dark

Very Brief and informative tutorial ,Thank you !

Amazing video, amazing voice, very clear! Thank you

What do u think of 5.0ghz fixed voltage @1.225 running on z590 gigabyte aorus master , running on air cooler so scared to go 5.1

how easy it could work. i have i9-9900k with 4266 Gskills and i am not able to use any of the XMP Profiles, not in 4266 or any lower frequ. it wont boot. These rams cost me about 600 bucks and running only on 2133mhz.

after the first time i used the aircraft it wont open in the cold and dark state again any help please ?

Hi! I managed to follow every step of yours but when I log into my computer it crashes, any advice?

I don't know if you'll reply to this but, I keep getting faults in my bleed air system after I start the engines and power down the apu.

This helped me out A LOT. I really appreciate the effort you put in, from explaining what each setting does to showing exactly where and what you're typing in. I was having stability issues after not having issues with my own overclock for about a year and this corrected my problems. I learned a lot. I did a game run (Rust) where I crashed twice yesterday in game and this corrected my problem. I think my voltage may have been a bit too low but after stepping up to 1.35 at 5.1 GHz, I'm not having any issues at all. I also stress tested multicore with cpu-z and I'm getting STABLE 5.1 without any stepdowns. My package high is 75C with an EVGA 360 3 fan CLC for about a 15 minutes stress so my step from 1.32 to 1.35 was fine in my case, temp wise, but also the stability has dramatically improved when I'm switching tabs, etc. I believe also having my load line calibration at 7 was likely wrong after hearing your explanation and have set it to 5. Maybe that's why I was getting stutters prior to game crashing. I really appreciate it and made sure to subscribe. Also your voice is extremely soothing. You would probably do amazing being a narrator for audible books.

I've had problems keeping my i9-11900k cooled since I got it. ASUS ROG STRIX Z590 GAMING WIFI motherboard, and originally a Noctua NH-D15 fan, but changed it out for a Thermaltake TH360 AIO. No matter what I do, idle temps never drop below high 30's, and any attempt to run the CPU > 5.1GHz at full load shoots temps well into the 90C range. The Asus AUTO overclocking "smart system" instantly shoots the CPU to 100C during full load. I tried the settings here, and duplicated everything, but under a stress load temps were still in the mid 90's. Note I couldn't do the negative AVX setting because the latest 1402 BIOS doesn't have that. Ultimately, I'm not sure what to do. I've repasted my AIO 3 times (and the Noctua 3 times as well) -- using both Pea and Spread method. Same result each time, so I don't think that's it. When I used the above settings, it would jump to 5.3 and go to 1.55v or so; it wouldn't stick at the 50 or 51 setting I put in. So disappointed with this CPU. It's been a nightmare. I now just have it on heavy load AVX setting in BIOS, but it dives down to 4.3GHz under heavy load and still hits the 70's with that.

I was able to get 51ghz at 1,360 volt. and it's stable. Did i good??

Super helpful video. Thanks. Anybody know why the X-Plane 12 ATC won’t work with this aircraft? I’ve never had a problem with any other aircraft having compatibility issues with XP.

Bro added a fire hydrant to the thumbnail 💀

Good Job.. Thanks

You left ring down bin at auto ?

i thought it would work with turbo mode off.

My overclock worked, but my CPU doesn't shutdown when the computer is shutdown. Any suggestions?

Hello, i just bought a corsair vengeance kit (2x8) with 3600 mhz, but when i turned on the xmp profile i had a blue screen when i was booting windows, so my question is, i can turn on the xmp profile to 3600 and change on that option “DRAM FREQUENCY” and put them to 3000 or 3200? my specs are z390 a prime asus, i7 9700k

can you give to me your xp11 plugin list? thanks :)

Thank you!

I saved all setting but only showing max of 3.7ghz. Any idea why?

this is what pilots consider as ASMR

Hey man when I set my ai tweaker ram speed to 3600 which is my correct ram speed my system won’t boot and puts me into safe mode, I have a z390p and two sticks of ram and it should be fine but I’m not sure what’s happening

Hi. Great video. However I think you forgot to mention one very important detail. That is that your motherboard uses DIE SENSE which is an exotic feature! This gives completely different voltages and results. I have the Asus Z490-E and not even that expensive bitch has DIE SENSE! :) very disappointing and something I first learned about some time later. Obvious for the extreme overclocker and VERY nice feature! So where you type in 1.37v others will have to type 1.43v without DIE SENSE (example voltages). Also you might want to play around with insted of "Best case scenario" You can set AC DC Loadline to 0.01. That is the lowest setting possible! I dont think best case scenario goes that low but im unsure! BUT... I wanted to hear if you ever was successfull runing a OC at 5.3 Ghz? I have the same CPU and SP rating at 63. But its widely known that 5.3 at SP63 is next to impossible. Could you provide me with some details now that I dont have DIE SENSE. What is your set BIOS voltage at 5.2 and 5.3? And what is the load voltage for both? Also LLC5 or LLC6? I remembered my 10900k SP63 wanting 1.43v LLC6 for 5.2!?! and 1.53v for 5.3?. Also if you be kind to tell me the V/F voltage levels for 52x and 53x. Thanks in advance.

Can you possibly make a checklist for the procedures you did in the video and send it via reply?

I got i9 10900k on 5.2 adaptive vcore. For it to run like a champ i have to let it draw 1.460+ vcore. 5.3 needs 1.499 locked and

Do u know why my eurofighter is rolling SO SLOW?! I’ve tried increasing my setting but it’s still so slow. Even at low speeds it turns slow.

My asus motherboard dont have ai overclock tuner, so i cant enable xmp pls help. I cant overclock my ram speed

how's it on fps? heavy?

What version of FF a350 is that? And may I ask what graphic plugin/addons are you using?