Видео

Yes, only open if necessary. Interestingly my heat pump stopped working yesterday during a shoot. I’ll make a video how to replace that over the weekend 😉 by opening it up 😢

Sure, most probably you have them set to fill the frame on import. Just select the clip and within Inspector->scaling -> select FIT. That should do it.

@@DrRave Thanks for the reply but still no luck. I have been using transform but that distorts my image

You are king. Finally, you have helped me solve the issue. I thank you so much

My pleasure

I didn’t realise that. Thanks for letting me know. Feel free to ask me any questions if you didn’t understand. I’ll help you out 👍🏽

All the best

That’s strange. You might need to dilute the smoke liquid. Dilute a little bit and try. Also check if the tip of the machine is getting hot or not.

Hey, yes, just hit backspace. It will delete without rippling. Does that work for you?

You can also try ctrl + shift + left or right bracket keys. The backspace I mentioned above deletes the selected clip after you have cut it. So for you you’re asking it’s ctrl+shift+[ left bracket - to cut and delete on left Or Ctrl+shift+] right bracket - to cut and delete on right Hope this helps.

Thank you 🙏🏽

That’s good to know. Glad it helped 👍🏽

Is the pump making a noise, if pump is working push the syringe to push the liquid through.

My pleasure

And I Thank you for that 😊

Hi Dustin, it’s not free anymore. The link is in the RUclips video description $3

@@DrRave I saw that. Too bad. But, I do understand!

@@DustinWatts Thank you for understanding :)

Sorry. No idea what that is?

Maybe the pump is not working. Does it pull the liquid in?

You should use regular vinegar. I’m not sure what’s inside apple cider vinegar. Maybe sugar. Try pushing water through and then regular vinegar if the problem still exists.

Maybe the batteries are dead.

@@DrRave but indicator blinked. It wont charge the battery. Usualy the indicator did not blinked like dat. Normally just red, till it full. I have try to leave it for like 2-3hours, but still it wont turn on.

@@DrRave i need to see dat first. Looks like the batt built in to board pcb or something. It just non removeable kind.

Can you test the batteries with a multimeter? Maybe that will narrow down the issue.

I don’t think that’s possible, how would that help, it would only slow you down. You could do “W” then backspace for trim to beginning or “W” then right arrow to select that bit and then backspace key to do it manually for trim to end.

@@DrRave it would be useful if you want to do adjustments and trim clips later on in the process. and btw I just remembered it's Shift+bracket (right and left respectively). But I dunno how to set the shortcut for this function

Oh yeah! That’s the default Davinci shortcut. It’s been so long I did not use it, that I forgot. You can change it to whatever you want under preference->keyboard If you don’t know what it is called, On the virtual keyboard select the keys, shift and open or close bracket and it will display the shortcut details on the panel below and you can easily change it.

@@DrRave I'll try again this way, thanks for you feedback! cheers

Glad this helped 😊

It does need a trigger either wired or wireless. Get a replacement wired one if you cannot find a wireless one to match. You can bypass the remote, but that will keep the machine in always on and ruin the machine. You do NOT want to bypass the remote.

It’s only $3 now.

I don’t know the exact transparency but I just the most transparent one I can find.

👍🏽🙏🏽🥰

Hi thank you for the awesome feedback. I have good news for you. Yes, in keyboard preferences you can change Shift+A to E. That will disable what E was being used for, but that’s ok if it speeds up your workflow. Within keyboard preferences, you can select E on the one hand screen keyboard and see what it is being used for and decide. Regarding the bins, it’s simpler. You can have multiple timelines open as tabs or one above the other. I use that workflow too, selects to main timeline by dragging from one to the other. One of the icons on the top left of the timeline turns on multiple timelines, just click that and open multiple timelines like selects, final and more if you need. Then drag and drop what you need. It’s super fast this way. Let me know if you have more questions.

@@DrRave Hey thanks for your response. 2 Questions, What time is Shift + A under so I can change it? What is it called so I can search for it or what menu is it under in the keyboard customization menu? And I know about your double timeline from selects but for me it is too awkward because with all my selects the time line would be too long and scrolling through the timeline to pull down the clip I might need is kind of a Pain, I would rather make a timeline with all my selects like you did In the video but then drag all those selects to a folder or bin and then choose my elects from that folder, seems much easier and organize just like I do in FCPX. IS that possible? And that brings me to another question if you have time. Anyway of seeing , like fcpx as well, which clips are already in use in a timeline either from a bin or on my timeline. Also like FCPX does by putting a yellow border on the clips or like a zebra type mark on the clip in the timeline that is in more than one spot on the time line? Sorry for all the messages but you are the only one I have seen making sense on how to do things in Davinci.

@@ekphotography SHIFT-A is Append clip. Easy way to see what it is set as is to use the virtual keyboard and select shift and A, it will show the shortcut settings. I haven't tried the darg to Bin like FCPX, let me know if it works for you. To see which clip is in use, there is a red line at the bottom of the thumbnail for the portion that is used in that particular timeline. You can also enable the feature to show which clip you have selected (within timeline) inside the media pool. This works even if you have clips inside different bins, it just opens that bin in the media pool and shows the clip. Go to Preferences>User>Editing and turn on - Always highlight current clip in the media pool. That should solve your problem 😉

@@DrRave Thanks, I finally just Put P as append to end since it is right next to the I/O so I can hit I/O P and no extra shift or anything needed which was kind of what I was looking for. Thanks for always responding..

@@ekphotography My pleasure

2 ways to do this: So if you’re using my shortcuts, on the timeline clip you can click Ctrl+R or CMD+R to open retime controls, select 40% and check ripple timeline. Then you can copy this and Alt+V to paste on all other clips after selecting them. There is a faster way to do this before you put the clips on the timeline. This is my way of doing it - before I put the clips in my timeline, I select all my 60p clips inside the media pool, right click and select clip attributes and change the frame rate to 23.976 right there. This will interpret the footage to 23,976 just like FCPX. And now you make your selects and drag them to the timeline. To remove attributes use the shortcut CTRL+Shift+X and then select the attributes you want to remove, including color grade, position, zoom, etc. There is a button on top right of the viewer to turn off the color effects but no button to remove it. You would need to right click on the color page and reset grade to remove everything color. Hope this helps.

You’ll have to try. Make sure you can return them if they don’t. I’ve had success with 5000mah and higher only.

Nice tip

Go for it and let me know how it went.

@@DrRave I’m from Lagos, Nigeria and I was this close in sending my Machine for repair until I came across this video. I hope it works 🥵

I hope it works 👍🏽

I’ve used USB C to power the R5 with a V-mount and even a battery pack. You do need its battery inside. I haven’t tried it without the battery (not dummy). It’ll use the power supply when usb is plugged in and switch to battery when you unplug the usb without interruption. So go for it 👍🏽

It’s quite close to the cone so probably 1/32 or 1/64. You don’t need a lot of power when the cone is small.

That’s awesome. Thank you ☺️ I’m adding a whole bunch of new Davinci tips to RUclips shorts in the next few days. Don’t forget to subscribe 😉

I’m so glad it helped 👍🏽

You’re absolutely correct. I usually do keep the key light on the other side. For this tutorial I had to keep it on this side as we progressed from window light to window motivated and then finally closing the curtains. It would have looked jarring if I had flipped the key after closing the curtains. I’m so glad you noticed it. Kudos.

That’s instagram.com/scythesskunkworks?igsh=MWg0eXprMHo0NXJiOQ== Brilliant Cosplayer

My pleasure 😊

Yes. It’s a cheap Lav, but for a start it’s better than the on-camera audio. Do watch the next video I upload, audio will be from the mkh-600. This video was about getting things done on a budget.

Thank you. Follow the steps and you can do it too 👍🏽

Zeus, it’s a pleasure having you at the studio learning and helping out. Lots more to do, let’s get back at it.

Thanks 🙏🏽

Haha. Most probably yes, I’ve had 1/4 promist on both my cameras and forget to remove it even when shooting stills. LOL.

It’s a matter of choice and the aesthetic you prefer. Most people would prefer minimalist.

Sure. I’ll be blonde in the next video. LOL

Glad it helped 👊🏽

It’s just some white cardboard cutout so it’s steady and I can hold it in a horizontal position as you see at the end of the video. If the rings are not there, you can only use the cone in a top down position like all the commercial ones available.

Glad you like it 😊

Love you back 😉

This was a short, how to with the video and description. Would you like to see a full tutorial?

What currency are you using? You can try my BMAC page as well - buymeacoffee.com/drrave/extras

Did it work?

Did it work with Vinegar? If not then there’s could be some other problem instead of the blockage

I did this until fog came out with the vinegar, but the pump wouldn't run turned out to be a fuse.

Glad you figured it out 👍🏽

@@paulosbornept7523 what did you do then?

Thank you. Much appreciated 🥰

He does, just not over the camera LOL 😂