Sleeper Tuning
Sleeper Tuning
  • Видео 352
  • Просмотров 604 938
How to install your Link ECU | Step by step instructions and tips | RB20DET standalone ecu setup
Starting with removing the stock ECU, removing the old circuit board, preparing the case for the Link ECU, installing the new circuit board, to installing into the car, first setup and a ton of tips along the way. This is a multi-part series where we fully review the product and features while Edgar gives you step by step instructions on installing the Link ECUG4X
About us:
We are a high performance shop located in Newark, DE. We specialize in Nissan RB, SR, KA, and VQ Toyota JZ platforms, and we offer support/maintenance for most Japanese makes.
We have both mainline Pro Hub 3000 and a Dyno Dynamics twin roller.
Pro Tuner/Dealer for : Link ECU, Haltech, Emtron, Uprev, Ecutek, ECUMaster, ...
Просмотров: 298

Видео

Choosing the right ECU for your RB20DET | Link ECU product review
Просмотров 31314 дней назад
Link ECU G4X Overview, features, examples and comparisons | RB20DET Part 1 : We get our shop R32 prepped for a new Link ECU G4X Let's go over what you'll need, what to expect and why Link ECU is our go to standalone ecu. Full Link ECU product overview, what's included in our Standalone ECU Package, why we like to use Link ECU on every platform we work with features, comparison, real examples Ch...
Supra upgrades | RB20 RB26DETT VG30 VQ35DE | A week in the shop
Просмотров 27021 день назад
Come chill for a week. Check out a typical week in the shop with Edgar, Kristen, Aaron and Jose. This is a short video covering some projects we are working on or wrapped up over the past week. This week we catch up on Leo's Supra and replace a clutch for a new customer. We touch on a few builds going on as Edgar gets ready to transport blocks to the machine shop. We also finish up some link ec...
Switching to the new Link G5 Voodoo Pro | New ECU for the billet block Supra
Просмотров 53328 дней назад
We run the Link G5 on our drag car, and wanted to see how it would work with Josh's big power Supra with a platform geared towards roll racing. We have done a lot to this car in the two years since we met Josh. He's since joined our race program and we hope to see him make big power soon!! Since his new block has been assembled and installed, we had to make some changes including a new turbo to...
2JZGE NAT | Supra Transformation | Full Build Overview | Dyno
Просмотров 1,2 тыс.Месяц назад
Take a look at how we transformed Matt's Supra! It's the little things for me. Single turbo kit - Artec manifold 2 Turbosmart 45mm WG Garrett Motion GBC37-900 T4 PRP R35 coil conversion kit GRP engineering trigger kit/cam gears DWB setup 82mm Bosch TB Zero Fab intake manifold/fuel rail PHR 4.5” IC Custom Fabrication - IC piping, catch can, coolant overflow tank, dp PHR trunk deck and battery re...
Supra progress report | Grannas T56 Swap | Kazz 1.5 way | Subframe and differential bushings
Просмотров 225Месяц назад
Supra progress report | Grannas T56 Swap | Kazz 1.5 way | Subframe and differential bushings
Nissan Laurel RB20det | Toyota Supra | new cars in the shop
Просмотров 283Месяц назад
Nissan Laurel RB20det | Toyota Supra | new cars in the shop
Stock RB25DET NEO makes 720 whp on E85 | Roll race in car POV
Просмотров 6622 месяца назад
Stock RB25DET NEO makes 720 whp on E85 | Roll race in car POV
Building a 7 second 2JZ in 48 hours | Race weekend recap | Pan American Nationals 2024
Просмотров 8612 месяца назад
Building a 7 second 2JZ in 48 hours | Race weekend recap | Pan American Nationals 2024
2JZ S14 engine failure | Drag racing save | 1 week to rebuild
Просмотров 5072 месяца назад
2JZ S14 engine failure | Drag racing save | 1 week to rebuild
RB25DET swap problems fixed | Worst burnout | Best Trap
Просмотров 4893 месяца назад
RB25DET swap problems fixed | Worst burnout | Best Trap
Stock RB20DET GTS4 | ECU setup and tune
Просмотров 1,3 тыс.3 месяца назад
Stock RB20DET GTS4 | ECU setup and tune
Time Capsule SR20DET swap | BTI Gauges 3.5" touchscreen review
Просмотров 4063 месяца назад
Time Capsule SR20DET swap | BTI Gauges 3.5" touchscreen review
2JZGE NAT | Stock bottom end Supra update
Просмотров 4483 месяца назад
2JZGE NAT | Stock bottom end Supra update
Test & Tune | AWD R32 RB20DET vs Shop 240sx RB25DET | Both manual 450whp
Просмотров 3433 месяца назад
Test & Tune | AWD R32 RB20DET vs Shop 240sx RB25DET | Both manual 450whp
2JZ drag car | High hp engine build | discussion and assembly
Просмотров 1414 месяца назад
2JZ drag car | High hp engine build | discussion and assembly
Billet block Supra update | GR1200 kit | New fuel system
Просмотров 2334 месяца назад
Billet block Supra update | GR1200 kit | New fuel system
Stock RB25DET NEO slips clutch on the dyno at 450 whp | Nissan 240sx problems
Просмотров 3074 месяца назад
Stock RB25DET NEO slips clutch on the dyno at 450 whp | Nissan 240sx problems
7 second 2JZ S14 | New setup for 2024
Просмотров 3744 месяца назад
7 second 2JZ S14 | New setup for 2024
1200 hp JZX90 Cresta | Built 1.5JZ
Просмотров 1,1 тыс.5 месяцев назад
1200 hp JZX90 Cresta | Built 1.5JZ
2JZ Billet Block | Supra Build
Просмотров 6595 месяцев назад
2JZ Billet Block | Supra Build
MKIV Supra build list | 2JZGE NAT | part 1
Просмотров 4535 месяцев назад
MKIV Supra build list | 2JZGE NAT | part 1
Built RB25DET | New larger catch can design
Просмотров 4426 месяцев назад
Built RB25DET | New larger catch can design
2JZ pushing coolant | Supra | Engine Disassembly
Просмотров 1 тыс.6 месяцев назад
2JZ pushing coolant | Supra | Engine Disassembly
Built and Boosted | G35 makes 580 whp
Просмотров 4376 месяцев назад
Built and Boosted | G35 makes 580 whp
Stock RB20DET | how to make more power | boost control and trigger disc discussion
Просмотров 3,7 тыс.6 месяцев назад
Stock RB20DET | how to make more power | boost control and trigger disc discussion
Stock RB25DET Neo | First Start | Her 240sx Shop car update
Просмотров 6266 месяцев назад
Stock RB25DET Neo | First Start | Her 240sx Shop car update
SR20DET powered S13 coupe makes 530 HP
Просмотров 6397 месяцев назад
SR20DET powered S13 coupe makes 530 HP
1.5JZ Build | How far did we push the stock 1JZ | Engine install
Просмотров 1,4 тыс.7 месяцев назад
1.5JZ Build | How far did we push the stock 1JZ | Engine install
Built 2JZ | Lexus SC300
Просмотров 6307 месяцев назад
Built 2JZ | Lexus SC300

Комментарии

  • @DarrelllCampbelll
    @DarrelllCampbelll День назад

    Sexy voice

  • @TLCHobbies
    @TLCHobbies День назад

    3:35 ... the only thing I don't like about turboing a 2JZ-GE non-VVTi. When you remove the ugly distributor, you'll need the cam trigger kit. Most people leave the cam gears exposed and you can't put the cam covers back on for a cleaner look because the cam sensor adaptor bracket is in the way.

  • @krysune1056
    @krysune1056 2 дня назад

    Would this work on automatic rb20det transmissions? The website says only for manual, but the actual instruction manual states there are toggles to set it to 2:3 configuration for automatic transmissions.

  • @miatamike206
    @miatamike206 2 дня назад

    it's called a self lubricating chassis system - CSW

  • @andreasathanasiou965
    @andreasathanasiou965 2 дня назад

    ❤️❤️❤️🇨🇾🇨🇾🇨🇾🇨🇾

  • @Chapo-559
    @Chapo-559 2 дня назад

    While switching maps while driving in the freeway from regular to burble do I have to put it in neutral and switch it can I keep it in 6th gear and switch maps using the phone ?

  • @ethanbidwell655
    @ethanbidwell655 2 дня назад

    Love the informational videos! Seems like everyone jumps ship from the RB20. After reading up on the GTRLink, did you guys have to swap Injector 4&6?

    • @edgarlaboy5225
      @edgarlaboy5225 2 дня назад

      Yes can do so right at the ecu. This is required for all rb20s

  • @Pew_o
    @Pew_o 2 дня назад

    You would think its a subaru looking underneath

  • @FootzYoungCity
    @FootzYoungCity 2 дня назад

    😂😂

  • @itsmyyoutube
    @itsmyyoutube 2 дня назад

    That's just rust proofing

  • @dennisanderson5414
    @dennisanderson5414 3 дня назад

    Wouldve been nice if udve shown how to actually remove the trim

    • @SleeperTuning
      @SleeperTuning 2 дня назад

      @@dennisanderson5414 thanks for the feedback. We hadn’t had our channel that long. Check out some of our newer videos for more in depth content.

  • @MENACEs14
    @MENACEs14 4 дня назад

    That timing cover is legit

  • @-thebatman-
    @-thebatman- 7 дней назад

    What’s the best ecu for an automatic rb20det skyline?

  • @Eliezerlopezm
    @Eliezerlopezm 9 дней назад

    I hear Dominican music there❤🎉

  • @erica4181
    @erica4181 11 дней назад

    Idk abt “ model “😭

    • @painfullies2285
      @painfullies2285 8 дней назад

      Don’t make yourself out to be an idiot.

  • @CarMotiveYT
    @CarMotiveYT 15 дней назад

    cant wait for the install video

  • @chrisfoster5044
    @chrisfoster5044 15 дней назад

    Link makes a great ECU. I went with the Haltech Elite a long time ago but have had many friends who went with the g4 and I would not hesitate to do the same if I were to do it all again. Sweet vids man keep it up!

  • @midnightmoves7976
    @midnightmoves7976 15 дней назад

    Nice! I have one of these on my 2003 350Z and was able to install it myself with no issues.

  • @mrtongueface8454
    @mrtongueface8454 15 дней назад

    Great video guys! Could you do a video on wiring up and then setting up the BTI gauge please? Heard it can be a bit of a pain

  • @krysune1056
    @krysune1056 15 дней назад

    Yo! I have sent you guys a few emails with no reply, is there a better way to contact your shop just on an inquire/questions?

    • @SleeperTuning
      @SleeperTuning 15 дней назад

      @@krysune1056 sorry about that, sometimes email can get put into spam. Give us a call or dm us on instagram. All our contact info and socials are on our website. Www.sleepertuning.com.

  • @houstoned515
    @houstoned515 15 дней назад

    Purely sexual ❤

  • @zyoungson215
    @zyoungson215 21 день назад

    Nice to see Rb20s being pushed to their potential. They were slept on where I am from (NZ). No one really pushed them past 300hp, or they were blown up in short order and swapped for an rb25.

  • @MrYomama5000
    @MrYomama5000 22 дня назад

    😂

  • @zacattack45
    @zacattack45 22 дня назад

    The best!

  • @CrappyFilmsInc.
    @CrappyFilmsInc. 22 дня назад

    Nice

  • @salvatorehest5516
    @salvatorehest5516 26 дней назад

    be interesting to see your feedback once fitted and using it, i'm looking at moving to a Voodoo G5 as well my tuner reckons they are just as good as the M1 platform

  • @dreednlb
    @dreednlb 27 дней назад

    Didn't notice the hole. But did notice the shirt was Garrett but there is a Precision turbo on the car.

  • @MiNissan300
    @MiNissan300 29 дней назад

    😂 I was looking at the hole too

  • @saulmalo3978
    @saulmalo3978 29 дней назад

    Can someone help me with the rim model and measurement please?🔥♥️

  • @titanstrength3041
    @titanstrength3041 Месяц назад

    Wow what an amazing build😍

  • @visionhunter3994
    @visionhunter3994 Месяц назад

    Song name: big dawgs

  • @jpilagan2094
    @jpilagan2094 Месяц назад

    Stock pistons and rods?

  • @bradjordan6984
    @bradjordan6984 Месяц назад

    Love the builds. Bring some supras and other to the annual Tri State Supra Meet to Lime Rock Park in November would be cool to see your work. Cheers!

    • @SleeperTuning
      @SleeperTuning Месяц назад

      ahh it would be dope to make a trip up north, but November is a crazy month for us with WCF at the start of the month thanks for the invite, have to check it out sometime

    • @bradjordan6984
      @bradjordan6984 Месяц назад

      @@SleeperTuning All good, it is after WCF on Nov 16th :) Doing laps with all supras attending at end of meet with pace car for awesome vid and drone footage. Hyped!!

  • @Hatopura
    @Hatopura Месяц назад

    Killed it!

  • @dispatchcustomerservice-gb4977
    @dispatchcustomerservice-gb4977 Месяц назад

    Nice touches yet straight to the point! The compression on that motor was amazing! Good work 🙏🏾

  • @jsupra7980
    @jsupra7980 Месяц назад

    I just love watching these GE builds. Awesome

    • @SleeperTuning
      @SleeperTuning Месяц назад

      Hell yeah, we love the street cars here!

  • @HandMadeWrath
    @HandMadeWrath Месяц назад

    How is this making 400+ and my rb25 barely makes 400?????

  • @Boostguru
    @Boostguru Месяц назад

    yo is that Jose?!?! Been a while since i've heard from him!

  • @gateaccess818
    @gateaccess818 Месяц назад

    liked and subbed! big "diff" problems hahahaha. facts!

  • @lbanks1soldier
    @lbanks1soldier Месяц назад

    Bang some what?👀👀. Incredible job saving one pos supra at a time

  • @davidduffield8267
    @davidduffield8267 Месяц назад

    best shop eveer!!!!!!

  • @dispatchcustomerservice-gb4977
    @dispatchcustomerservice-gb4977 Месяц назад

    Nice work

  • @avirtualworld4U
    @avirtualworld4U Месяц назад

    Need some Mothers Mag & chrome polish on that thing.

  • @spawn9765
    @spawn9765 Месяц назад

    what is that?

  • @marquelmarshall6690
    @marquelmarshall6690 Месяц назад

    how much boost on the unopened rb25det?

  • @mrandre300020
    @mrandre300020 Месяц назад

    Fuel setup?

    • @SleeperTuning
      @SleeperTuning Месяц назад

      ruclips.net/video/zyySNgYEoTY/видео.html

  • @lbanks1soldier
    @lbanks1soldier Месяц назад

    Supra for life

  • @tenlolz
    @tenlolz Месяц назад

    Keep the content coming, love it👊💯

  • @mikethetechnician310
    @mikethetechnician310 Месяц назад

    do a shop tour!

  • @jpilagan2094
    @jpilagan2094 Месяц назад

    Nice looking er34 4door