- Видео 11
- Просмотров 5 066
bear red
Добавлен 2 апр 2013
Upgrading the LaCie DJI CoPilot to SSD
LaCie DJI CoPilot ssd upgrade.
Note: zulusierra.co/upgrading-the-lacie-dji-copilot-to-ssd/
You are responsible for all disassembly.
Format the ssd in advance and install it.
Pay attention to cable damage when disassembling the monitor.
After replacing the ssd, set up with the dji copilot app.
Note: zulusierra.co/upgrading-the-lacie-dji-copilot-to-ssd/
You are responsible for all disassembly.
Format the ssd in advance and install it.
Pay attention to cable damage when disassembling the monitor.
After replacing the ssd, set up with the dji copilot app.
Просмотров: 2 137
Видео
Topsky prime 1s bad product?
Просмотров 2365 лет назад
When the drones move, a wavy afterglow appears on the screen. Is this all the products? Or is it just me or a bad product?
2017.11.17 MBC경남 좋은아침 인텨뷰
Просмотров 977 лет назад
2017.11.17 MBC경남 좋은아침 인텨뷰 - video upload powered by www.TunesToTube.com
hglrc f4
Просмотров 1,3 тыс.7 лет назад
After connecting the SBus receiver. Receiver not responding in beta flight. The same symptom to replace the receiver. Both new products have the same symptoms.
My case, the most hard part was sliding out from the frame. It's too tough. How'd you guys did that?
Do you know the specs for the battery ?
Great idea. Do you get better speeds with this hack? What were your transfer shoes before and after? Thanks.
My battery is damaged or you don't know where I can buy a new battery?
Sorry .i don't know.
Do you know the specs for the battery ? I have a Lacie Boss, which looks pretty much thesame ad DJI CoPilot and my battery is starting to get really bad.
@@saulobelter Same issue ... do you know something new?
Same here, my battery doesn't even charge anymore @@victorgilalvarez
@gobletravelsdives5877 It says EVE 475468 and L0691-LF 2ICP5/54/69
Thank you!
perform the entire process and everything was successful, the only problem is that when trying to make backups from sd the legend appears: critical! apparently it gets too hot, I already tried to replace the diffuser pad and put some thermal paste but it is useless, has someone had something similar happen? any advice?
same issue here.
Thank you that looks great ! Questions : What formatting is needed for the new SSD ? And, is it possible to put a different capacity (higher or lower) SSD than the stock 2Tb HDD ? Thx
Great video thanks. Followed along and now I have an SSD CoPilot too! The warranty tamper label is surprisingly tough and almost broke the ribbon connecter to the SATA connector. The connector for the ribbon from the display is one of those lift-the-flap types which are fiddly with no positive connection until the flap goes back down. The bit that took the longest for me was the outer end-caps; finding the location of the tabs and prising the plastic off was much harder for me than you. I think I need a better spudger. I installed Samsung 870 QVO SATA and the outer dimensions of the top cover are very slightly larger than the outgoing drive, not enough to prevent installation or recommending it but enough to need a bit of leverage to jam it back into the case. I managed with similar tools to you, a credit card for the silver plastic display cover (very useful), small Philips for the case screws and small Torx for the drive screws, then a tiny flathead, a spudger, a craft knife and tweezers for the ribbon cable. My original drive was formatted exFAT not NTFS so I went with exFAT for the replacement too and copied the same name. There wasn't anything I had to copy over so I have a satisfying round number of 2000GB free. The zulusierra link is no longer pointing to anything.
Can use 8tb SSD ??
My cover doesnt pop off like you showed at the very begining
Is it work ?
It works very well.
Where & what did you format it in before installing? C as n we get a follow up of it use? I’m looking to do the same...
@@TheAlPup After connecting ssd to the pc, it was formatted as ntfs. Used after mounting on dji copilot. It seems to have been formatted after connecting to the copilot app. I can't remember.
@@joseungman4183 i will try . thanks bro
감사합니다 🙏 구독과 좋아요로..!!^^♡
잘하시는데요 비디오가 많이 없네요
this is my friend ...nice one oppa....
Hi ~ajeossi . I want to go back to Malaysia.
Bonjour j'ai le même problème.quel est la solution svp??? merci
I bought it at banggood. I got a new product after I talked about symptoms by mail.
@@joseungman4183 Bonjours donc ce n'est pas réparable ?
I have the same problem with my turtle v2..😭
I bought it at banggood.com. I received an exchange.
I have the same problem - did you just RMA the faulty one, or did you find a solution? Thanks, glad to see my exact problem shwoing up.
Same problem!
I have the same problem
Same here, any solutions?
yes, I solved it with reflux with a lot of flux and a hot air gun at 450 C
@@texonfpv429 how did you resolved, I have the same problem
You can use UARTS or DSM Pad for IBUS reciever
I can't get my board connection to beta flight just says connection successful then closes 15 sec later
I am using the HGLRC Omnibus F4 micro and I cannot get the board to talk to my SUMH receiver at all. I've tried several UART and Rx configurations and it just won't do it.
Allen Ampueda did you fix this???
Hi the solution is simple the UART 1 and 3 are exchanged so you need to plug on rx3 or sbus pad and activate serial port for UART 1
A mi lemfo les 1 le pasa lo mismo, sabrán por que pasa eso
you must connect the sbus wire to the pin rx3. not on the sbus pin.
sorry. on the rx1 when you use uart1
found a solution? I have the same issue with the hglrc f4 v5 pro aio.
Mattia Alessandro Romani me too. tried the other uarts too...
going to give uart1 another shot
Mine started to reheat and the battery unused, lasts an hour! When you put it on the arm you feel it burn, so I'll give it back.
thats also my question: where did you buy? how about warranty?
aliexpress.com Deliver message to Ali seller. It is decided to receive new product after returning by courier. Korean courier service does not include batteries. It is stress.
I bought mine at banggood, received yesterday. Till now I am lucky with it ☺
I hope you will use it without failures. If it does not break, it is a really good product.
조승만 yes, I really like it ☺
Where did you buy?
aliexpress.com