- Видео 591
- Просмотров 516 428
Stefan
Добавлен 28 окт 2020
Axial SCX6 Honcho (1:6), mod stage 1.0; for details check out the description #axial #scx6 #honcho
Mod stage 1.0, appr. 14.5kg
- Reefs beast 2000 servo
- Al servo and ESC bracket
- Al steering links and panhard
- Al shock towers front and rear
- Al hub carrier
- Al steering joints
- Al shackles for front bumper
- brass lower spring cup
- wheel extensions StupidRC +30mm front and rear
- Al beadlock wheels 2.9“
- Proline Super Swampers tires
- Proline dual stage foams
- Laser Design clipless body latch
- Al door handles
- front fenders trimmed to avoid tire rubbing
- front bumper trimmed to avoid tire rubbing ok
- Reefs beast 2000 servo
- Al servo and ESC bracket
- Al steering links and panhard
- Al shock towers front and rear
- Al hub carrier
- Al steering joints
- Al shackles for front bumper
- brass lower spring cup
- wheel extensions StupidRC +30mm front and rear
- Al beadlock wheels 2.9“
- Proline Super Swampers tires
- Proline dual stage foams
- Laser Design clipless body latch
- Al door handles
- front fenders trimmed to avoid tire rubbing
- front bumper trimmed to avoid tire rubbing ok
Просмотров: 26
Видео
RC-ERA C190 H145 Helicopter RTF 1:30 #helicopter #era #H145 #C190
Просмотров 10716 часов назад
RC-ERA C190 H145 Helicopter RTF 1:30 #helicopter #era #H145 #C190
Furitek Katana, Mod stage 4.0, for details check out the description #furitek #katana
Просмотров 4816 часов назад
Mod stage 4.0, weight 703g (battery 600mAh included), distribution: 58% / 42% - new steering servo NSDRC FS100 Micro Mod stage 3.1: - metal steering links - metal servo mount - body latch trimmed - fake winch mounted - tow hooks mounted Mod stage 3.0: shocks reworked - stock: nearly no oil in the shocks - mod: 20wt oil - little bit spring preload on the front shocks - sag appr. 50-60% Result: f...
RC-ERA C190 Helicopter RTF 1:30, start, flight, hovering (low) & landing #helicopter #era #C190
Просмотров 11319 часов назад
Windy conditions, speed level 3
Rlaarlo Omni Terminator Carbon; stock delivered speed 16-tooth pinion gear #rlaarlo #terminator
Просмотров 56День назад
After that session, the right rear shock lost its oil, and the front left shock was slightly bent. Otherwise, there was no other damage visible.
JJRC C8812 RTR, fun little caterpillar rig, for the prize (~60$) a blast #jjrc #caterpillar
Просмотров 205День назад
JJRC C8812 RTR, fun little caterpillar rig, for the prize (~60$) a blast #jjrc #caterpillar
RC-ERA C190 H145 Helicopter RTF 1:30, windy conditions, speed level 3 #helicopter #era #H145 #C190
Просмотров 40714 дней назад
RC-ERA C190 H145 Helicopter RTF 1:30, windy conditions, speed level 3 #helicopter #era #H145 #C190
TY XIN 725 Jet Boat, affordable (~60$) not 30km/h but plenty of speed for having great fun #jetboat
Просмотров 9421 день назад
TY XIN 725 Jet Boat, affordable (~60$) not 30km/h but plenty of speed for having great fun #jetboat
Team Corally - ASUGA XLR 6S, onroad speed test: stock pinion/spur gear, mods: check description
Просмотров 140Месяц назад
Team Corally - ASUGA XLR 6S, onroad speed test: stock pinion/spur gear, mods: check description
Reely Deathwatcher XL 1/7 6s (FTX SUPAFORZA GT), speed test with included 14T pinion ; #reely #ftx
Просмотров 161Месяц назад
Reely Deathwatcher XL 1/7 6s (FTX SUPAFORZA GT), speed test with included 14T pinion ; #reely #ftx
RC-ERA C190 H145 Helicopter RTF 1:30 in quite windy conditions #helicopter #era #H145 #C190
Просмотров 1,6 тыс.2 месяца назад
RC-ERA C190 H145 Helicopter RTF 1:30 in quite windy conditions #helicopter #era #H145 #C190
RC-ERA C190 H145 Helicopter RTF 1:30 IN TUBULENCES #helicopter #era #H145 #C190
Просмотров 2,7 тыс.2 месяца назад
RC-ERA C190 H145 Helicopter RTF 1:30 IN TUBULENCES #helicopter #era #H145 #C190
Redcat Ascent18, mod stage 3.1: reloc. electr./battery, details in the description #redcat #ascent
Просмотров 1312 месяца назад
Redcat Ascent18, mod stage 3.1: reloc. electr./battery, details in the description #redcat #ascent
Furitek Katana, Mod stage 4.0, steering servo NSDRC FS100 Micro #furitek #katana
Просмотров 1452 месяца назад
Furitek Katana, Mod stage 4.0, steering servo NSDRC FS100 Micro #furitek #katana
RC-ERA C190 H145 Helicopter RTF 1:30, first flight #helicopter #era #H145 #C190
Просмотров 1,6 тыс.2 месяца назад
RC-ERA C190 H145 Helicopter RTF 1:30, first flight #helicopter #era #H145 #C190
Hobby Plus CR-18P EVO PRO mod stage 5.0, steering servo NSDRC FS100 Micro#cr-18pevopro #hobbyplus
Просмотров 6202 месяца назад
Hobby Plus CR-18P EVO PRO mod stage 5.0, steering servo NSDRC FS100 Micro#cr-18pevopro #hobbyplus
Hobby Plus CR-18P EVO PRO mod stage 4.0, #cr-18pevopro #hobbyplus
Просмотров 2912 месяца назад
Hobby Plus CR-18P EVO PRO mod stage 4.0, #cr-18pevopro #hobbyplus
Reely Deathwatcher XL / FTX SUPAFORZA GT 1/7 6s, mod 1.1 #reely #ftx #mustang #ford
Просмотров 1572 месяца назад
Reely Deathwatcher XL / FTX SUPAFORZA GT 1/7 6s, mod 1.1 #reely #ftx #mustang #ford
Axial SCX6 Honcho, mod stage 1.0; for details check out the description #axial #scx6 #honcho
Просмотров 3593 месяца назад
Axial SCX6 Honcho, mod stage 1.0; for details check out the description #axial #scx6 #honcho
Reely Deathwatcher XL / FTX SUPAFORZA GT 1/7 6s, gyro turned off, no need for it #reely #ftx
Просмотров 7193 месяца назад
Reely Deathwatcher XL / FTX SUPAFORZA GT 1/7 6s, gyro turned off, no need for it #reely #ftx
TY XIN 725 Jet Boat, affordable (~60$) not 30km/h but plenty of speed for having great fun #jetboat
Просмотров 6163 месяца назад
TY XIN 725 Jet Boat, affordable (~60$) not 30km/h but plenty of speed for having great fun #jetboat
LDR/C 1899 RTR drift car die casted body; my 2. order and again a broken control arm rear right!
Просмотров 743 месяца назад
LDR/C 1899 RTR drift car die casted body; my 2. order and again a broken control arm rear right!
Reely Deathwatcher XL 1/7 6s (FTX SUPAFORZA GT), mod stage 1.0, details in description; #reely #ftx
Просмотров 773 месяца назад
Reely Deathwatcher XL 1/7 6s (FTX SUPAFORZA GT), mod stage 1.0, details in description; #reely #ftx
FMS FCX18 K10, slightly modified (1.0), for details check out the description #fms #fcx18
Просмотров 893 месяца назад
FMS FCX18 K10, slightly modified (1.0), for details check out the description #fms #fcx18
JIABAILE 1/43 AWD drift/race car, cool little table racer for about 25$ #driftcar #drifting
Просмотров 7974 месяца назад
JIABAILE 1/43 AWD drift/race car, cool little table racer for about 25$ #driftcar #drifting
Redcat Ascent18 mod 3.0 & Furitek Katana mod 3.1, check description for details #redcat #ascent
Просмотров 1504 месяца назад
Redcat Ascent18 mod 3.0 & Furitek Katana mod 3.1, check description for details #redcat #ascent
Redcat Ascent18, mod stage 3.0 on rocks, check out the details in the description #redcat #ascent
Просмотров 684 месяца назад
Redcat Ascent18, mod stage 3.0 on rocks, check out the details in the description #redcat #ascent
Redcat Ascent Fusion 1:10, mod stage 1.0, for details, check out the describtion, #redcat #ascent
Просмотров 604 месяца назад
Redcat Ascent Fusion 1:10, mod stage 1.0, for details, check out the describtion, #redcat #ascent
Redcat Ascent18 mod 3.0: Furitek Venom and more, check out the description #redcat #ascent
Просмотров 834 месяца назад
Redcat Ascent18 mod 3.0: Furitek Venom and more, check out the description #redcat #ascent
Redcat Ascent 18, mod stage 2.0 on rocks, check out the details in the description #redcat #ascent
Просмотров 474 месяца назад
Redcat Ascent 18, mod stage 2.0 on rocks, check out the details in the description #redcat #ascent
Nice
Thanks, glad you like it 😃
Great video, and great perfomance. Tires is injora?
@@Lourenço_RC Thanks, glad you like it. Injoras, right. Details to the mods are in the description.
@@stefan-norge As soon as I posted the comment, I went to the video description and saw the mods. 😅
Oil in the shocks? When yes what type?
@@peternagy1102 Yes, it is 20wt, you will find the details of the mods in the description.
Nice
@@JimmyJames801 Thanks, glad you like it 😃
Just got one of these and found your channel good stuff keep on keepin on 🤓✨
😂 They are great, like this rig a lot. Thanks for your comment 👍🏻
Lol I thought it was real for a moment their I dident see the rc ;)
@@davzrobaichjukes 👍🏻👍🏻 I am lucky and have a nice background where I live 😃
Awesome people
@@davzrobaichjukes Thanks, glad you like it 😃
cool helicopter 🚁 nice background, reminds me of cliffhanger 🚁🚁😃👍👍
Thanks, glad you like it 😃
Klasse teil was Bringt das Boot wirklich ?????
@@CRC42553 Muss es mal noch mit GPS messen. Denke, so zwischen 20 und 25 km/h ist drin. Es ist ja kein grosses Boot und ich fahre es auf einem „Fluss“ direkt vor meiner Haustüre der ca. 5-15 m breit ist. Jetantrieb ist aber schon cool. Man kann einfach die ganze Breite nutzen, ohne sich immer Sorgen um die Schraube zu machen….
I also have an EVO PRO and was thinking about trying to move the gear servo (flip it to the other side of the servo holder) or put a single speed transmission from an FX118 in order to move the ESC next to the RX. Did you also consider moving or changing the electronics?
Fully understand your idea. Was also thinking about that. But I don‘t mind the 2 speed transmission, to be honest, I like it.
I said that about my 3rd... 4th is in the garage.😂
@@toddenger8183 It was my last K5…. Looks like this now: ruclips.net/video/6lsg-dG-R-4/видео.htmlsi=Bo3iPqRfUN9KmhJ6
What wheels are those
These are Reely 1:10 15 spoke wheels. Come glued, are cheap and work well. I am from Switzerland, now idea if they are available outside of Europe…
Wow looks so great, going to buy this car as my first rc car :D
@@StrocGG You will not regret it 👍🏻
Are those dj crawler tires
@@shainejackson5829 yes, check out the description and you will see all the mods
@@shainejackson5829 Meanwhile I use other wheels and tires: ruclips.net/video/DezEdQltt7U/видео.htmlsi=f7T3czxzLx-sSFPT
Hyrax tires.? Looks sweet.
@@Charlieoil Thanks, glad you like it. They are from Injora, 64x24. By the way: now the LC80 lools like this: ruclips.net/video/GeG61XW9O0w/видео.htmlsi=rHbZabn4FZHgqTka
Great looking rigg.. those tires look mean💣😀🔥🦾💯🧨
@@coreyfuchs730 Thanks, glad you like it 👍🏻😃
I see you used the smaller back door handles of the jeep? Looks very good. I was thinking of doing this.
@@m.a.s2830 Exactly, in my opinion the back door handles have the right size 👍🏻
Where did you get the tire cover from?! Love your build!
@@xXNewfie709Xx thanks, glad you like it. It is a Traxxas TRX4M cover.
Thank you for this video! Helps see what size will fit!
Thanks, glad it is useful for you.
Good day! Your rig looks awesome! Where did you get the spare tire cover? Thanks! <3
Thanks, glad you like it. The spare tire cover is a spare part from a TRX4M.
@@xXNewfie709Xx Meanwhile it has also got inner fenders and a fake winch: ruclips.net/video/GeG61XW9O0w/видео.htmlsi=PxiHxuAA6bsmiKQL
❤
@@LaurentMourot-o9q Glad you like it 👍🏻😃
Great looking rig
@@montana4069 Thanks, glad you like it 😃
does your CR18p also have the bloody wheel slop issue as there is too much play in the poartal gear, Diff and finally wheelhubs? Extremely annoying downhills..without new gear nothing easily rectified?
@@ScimPeep There is a lot of slop, yes. More than the FCX18/24 platform and a lot more compared to the Ascent18. If I come to a downhill section I always let it roll in without throttle to avoid having the slop when the decent starts 🤪
Also tryna find super soft silicone inserts for the xhx pin tires with the s5 compound
@@dayzplayer8539 I am using Injora yellow silicone. They have 2 different sizes.
I’m trying to do a build on an FMS 1/24th scale K5 crawler im putting a cart together on Amazon so far I want to do a super flexi build I got 53mm shocks but I’m tryna figure out some longer wheel spacer to go on it u have any suggestions pls let me know I’m tryna make this thing into a comp build
@@dayzplayer8539 Injora has brass spacers. Check it out.
think i want one 👍👍😀
@@rcplaytime It is worth it 👍🏻
looked very windy,helicopter looked strong though 😀👍👍😎
@@rcplaytime Absolutely, I was surprised how well it did 👍🏻
if the windows weren't black that would look so realistic, especially with that stunning background, great flight dude,ive been looking at these heli's ,may take the plunge and get one 👍👍😀😀
@@rcplaytime Thanks, glad you like it. It is worth. In my opinion the best one yet from ERA in this class.
My cousin bought this one and he is thinking to buy the turbo racing as well can please upload community post comparing the size and include the hnr aswell😅 please ❤🙏🏻🙏🏻
Or a short 😢please
@@evoxgamerz5877 I am on vacation and have no access to the HNR and the turbo racing. But the HNR is appr. 1/11 scale, the turbo racing a 1/76 and the JIABAILE is a 1/43. just do the math: 1/11 = ~45cm, 1/76 = ~6.5 cm and the 1/43 = ~11cm. Otherwise check the internet for the lenght in detail.
@@stefan-norge I know the size I just wanted to see a picture of them together if you can’t it’s all right 🙏🏻😊
Salut my friend super car super video subscribe subscribe ❤😊😊
Coole Kulisse! Viel Spass mit der kleinen 145er. Habe sie seit einer Woche auch im Hangar stehen; fliegt sich echt entspannt.
Absolut, fliegt wirklich gut 👍🏻😃
She's mean!
@@johnlujan8706 Thanks, glad yoz like it 😃
Cool!
Thanks. Glad you like it. One of my favorites right now.
Looks way better with the fenders cut , I got to get one , I can't wait to trim the body 😊
@@jimbo4203 Glad you like it. To be honest: I trimmed the fenders because of the massive rubbing even with stock wheels/tires. With 64x24 mm and offset rims it would have been impossible to use it.
@@stefan-norge I trim them all , l like the Dremel
@@jimbo4203 me too, otherwise I cannot fit the wheels/tires I want to fix 😉
What are all the upgrades on it? Looks good from the front!
@@johnlujan8706 You find all the mods in the description. This is the latest vid of the Ascent18, also all mods in the description: ruclips.net/video/eZ87HPObL-Q/видео.htmlsi=ytM29MsD0Dpy-En7
@@stefan-norge Thanks
@@stefan-norge I have Powerhobby brass rims to build. In your opinion; should I only include brass rings in front? Thanks!
@@johnlujan8706 I would start this way, just front.
@@stefan-norge Happy Sunday! Thanks!
The fact that your driveshafts are holding up is a miracle. I have two they both gave out within a few months. But i let kids play with mine so they get more abuse.
@@DanhNguyenster64 Sure, it is a big difference if the little kids or the „big“ kids play 😉
Wow
@@DictadorBalmaceda Thanks, glad you like it 😃
All will be set up slightly different
I have 2 of the evo pro brushless and getting another 1 or 2
You definitely know how to setup a crawler properly 😎✝️🙏🏽☮️
Killer crawler, what a hell of a setup 😎✝️🙏🏽☮️
Wow great truck😎✝️🙏🏽☮️
@@mypassionrc-studioxd40lous66 Thanks, glad you like it.
Sweet any runs coming up 😎✝️🙏🏽☮️
@@mypassionrc-studioxd40lous66 Thanks 😃 you will find some footage on my channel, thisnis an example: ruclips.net/video/BZ7gOVu2UWA/видео.htmlsi=fH_hmX61Ox4SYk88
🤣 awesome looks like a sick crawler, I’ll have to check out the finished product 😎✝️🙏🏽☮️
@@mypassionrc-studioxd40lous66 Thanks, glad you like it 😃
cool, wie echt
@@Powershotknecht Danke bestens 😃
This build is looking nice..i just subscribed.
Thanks, glad you like it 😃
Nice Stefano very powerful
@@Rc_Alex_76 yes, absolutely. For me in Switzerland these servos are very expensive. With shipping and taxes it is double the prize. That‘s why I am testing one from Aliexpress in my Redcat Ascent18. Check out this vid: ruclips.net/user/shortshPNwO3AYs94?si=p5UxjADl1Rum0kIx
@@stefan-norge will do
Looks nice. Is this the same Diameter? Or have you cut the Body shell?
@@3000911 Thanks, glad you like it. The wheels/tires are much taler, 1:10 scale and they do not improve the handling. It is faster of course. And yes, I did trim the body a lot to make it fit. Look great, more speed, loss of handling. I changed back to stock…
What's the axel setup to get it that wide?
@@__________________________4984 Check out the description of the video for details. But the stands i wider due to the offset rims and hex extensions, both from Injora.
Do you have any solution to this problem? Can fix? I´m in same situation!!!
@@andrecampos1790 It is so annoying…. I have an other one which have the same problem. Means I am going ti make 1 functional out of two. I have heard one should get it as a spare part but ai did not search for it yet. But I will do that, firstly checking on Aliexpress. It is a shame this happens all the time. I got 11$ refund but that does not really help solving the issue.
@@br1dg3 Great, thanks for sharing. I got also the fully refund, just today. Didn‘t expect that after weeks discussing with Aliexpress. Was quite surprised. I am going to order these parts as well.
@@stefan-norge Really glad you end up getting the full refund from Aliexpress, i feel like the refunds with them became faster after i started sending the unboxing videos to them whenever something comes broken or missing ,it just shows them that i'm not trying to scam them or taking advantage of the seller because they are seeing the same exact thing i did at the time i got the order and opened it, it is just an a irrefutable truth.
@@stefan-norge By the way if meanwhile you receive the "Steering Cup Blocks" please make a video replacing them, i would really appreciate to know how it is done properly since i'm really new to RC Cars and this LD1899 my first LDRC car. In the future i'm planning to get the MX5 Miata and the Honda NSX too. PS: I really hope you can see this comment, youtube keeps deleting my comments for some reason and i don't know why.Not sure if i'm using any words that trigger them to automatically shadowban my comments
@@br1dg3 I see your comments, no worry.
do you know if the 58x24 tires fit/work on the stock rims that come with the truck?
@@Raptor-ln2mr In my opiniom there is no reason why they should not work.