- Видео 66
- Просмотров 687 125
Things I Do
США
Добавлен 19 фев 2016
Cristal GX-3 plastic trim restorer
Plastic trim restorer on Jeep Wrangler bumper.
About $5 at Walmart.
#walmart
#trimshine
#jeeplife
#bumper
#automobile
About $5 at Walmart.
#walmart
#trimshine
#jeeplife
#bumper
#automobile
Просмотров: 331
Видео
Milescraft Hinge Jig Review
Просмотров 2,6 тыс.Год назад
#homedepot music by bensound Edited by VideoGuru:videoguru.page.link/Best
Floating Bed
Просмотров 31Год назад
4 - 2 x 8 lumber from Home Depot 8 - 2x 3 lumber from Home Depot 1 - 4x8 sheet of plywood from Lowes 1 - box of 2 1/2 inch trim screws 1 - yard, 9 feet wide 1/4" batting 3 - yard 5 feet wide grey fabric 1 - 16' strip of LEDs Total cost $138 music by LiQWYD Edited by VideoGuru:videoguru.page.link/Best
Jeep cup holder & storage pocket review.
Просмотров 6013 года назад
Jeep cup holder & storage pocket review.
Quick tip for removing stubborn bump stops
Просмотров 5714 года назад
Quick tip for removing stubborn bump stops
Avanti AV100 HVLP Electric Paint Sprayer
Просмотров 76 тыс.4 года назад
Avanti AV100 HVLP Electric Paint Sprayer
Bestop High Rock Oversized Tire Carrier
Просмотров 7875 лет назад
Bestop High Rock Oversized Tire Carrier
Mastertop vs Bestop, TJ soft top review
Просмотров 15 тыс.6 лет назад
Mastertop vs Bestop, TJ soft top review
Sun Joe Electric Dethatcher/Scarifier
Просмотров 6 тыс.6 лет назад
Sun Joe Electric Dethatcher/Scarifier
This is a beaut! Looking for one just like this!
@@IDR1219 thank you, appreciate you watching the video. Good luck on your Jeep search.
Çekim yaparken tam üstü çekmiyorsunuz üç boyutlu olacak şekilde..
I love it so much! I just got the french vanilla but the 12 oz of water and 3 1/2 teaspoons of the coffee was not the correct ratio for me, way to much water. Id recommend doing about 6 fluid oz instead of 12
Looks great! I’m trying to do the same. How did you paint the hood and the top of the fenders ? I was thinking prop the hood up but probably not good to have it at an angle
@@CoolnBreezy.Productions thank you, I propped the hood open a couple inches so I could spray the tops of the fenders under the hood, but I'd recommend removing the hood and painting it separately.
Ist der ABT
cerakote trim restorer works better and you could apply it every 3-4 months to keep it new
@@LovesDetailingBusiness thanks for the tip, have you tested both products?
Thx for the video, i bought the same wheels
😂😂😂 the first thing you DONT want a jack to do is roll! WTF😂
@@camillelee3775 it doesn't roll when it's in the air, the rollers come off the ground as soon as the jack goes up and before it makes contact with the car.
Great vid, both great colors.
Is it catless?
@@steezy.cheez.no, it has a 200 cell cat.
Dont listen to this guy he says to wipe off as soon as it turns gray you do that and all your gonna be doing is waisting it ,if you read the can it self it says to polish metals untill black residue appears (hard rubbing is not necessary )work black residue in all directions adding small amounts of polish as needed ,it dose not say wipe it off as soon as it turns gray fukn du***ss thats why he used a already polished rim because he dont know what hes doing hes just making useless videos telling ppl how to do shlt wrong for veiws to make money off youtube he has no fukn idea what hes doing
My 15 inch wheel with 33s were 10-15 year old. Came with the vehicle when I recently purchased it. Just picked up the same exact wheel and tire setup like you from FB market place and ordered the adapters from rough country. Looking forward to how it looks. You are the real MVP. Thanks, man.
I got mine for $39.99
Was thinking to go one today they are now 80$ they dont have any coupons for it right now but have 90 days to return it if not happy with it which is good, i was trying to decide what brand us better the Avanti ir Wagner's brand heard & saw kot if negative reviews on Wagner spray guns so thought i would least try the Avanti one at harbor freight, i have 232 6' foot wood pickets to paint that are new not hanging up yet i would rather have them hung up but one side of the wood pickets will be up against chain link fence so have to paint both sides of the boards be lot of work yet but will be faster i tried rolling 30 boards & was disaster had to vlean up boards being the promer leaked between noards when had them laying flat next to each other rhe following day they was glued togher & wound up scrapping primer from sides of boards.
@@BurtBowers I also have the Wagner Flexio 4300, both the Avanti and Wagner work well, but the main difference is the Wagner iSpray nozzle will spray undiluted paint. However, it can take time to get the settings (flow, pressure, & paint velocity) just right, otherwise it produces a lot of overspray or gloppy finish, whereas the Avanti is more user friendly but requires a lot of diluting if you use thick paint. The Wagner tip also dries quickly and I need to clean it every 10-15 minutes, otherwise the finish will be affected. I do like the Wagner gravity feed gun, but I probably wouldn't buy the Wagner Flexio 4300 for the iSpray canister gun again.
yeah I looked into today the Wagner flexio 2500 model which you don't have to use any water to thin out paint or primer which is what I like, it's double the money of what the Avanti spray gun that harbor freight sells but just found out today that Lowe's only has a 2 day return policy on the Wagner spray guns which home depot has 90 day return so think I'm leaning more towards the Wagner flexio 2500 model that will serve its purpose it's like I said I don't want to deal with having to add water every time in the Avanti or lower end Wagner models .@@thingsido2924
put JL tires and rims on my 88 YJ. The front studs are just enough to get 10 threads. The rear wheel studs are too short. Replace them w3ith Dorman part # 610-234.1 and then the rears will be perfect. The 610-234.1 are for the rear 627 Knurl and 1 5/8. The 610-449 iw .627 Knurl and 1 15/16 on my 89 I had to trim them a little so they didn't stick out past the adapter. Also JLs are 14mm instead of 1/2 inch. You can still use the 1/2 inch nuts but they need to have a bigger cone than stock. Coyote 56K542 is a box of 20 bulge acorns for about 20 bucks.
You have to have the water turned on. I've had one for years and it NEVER kinks as long as there is water pressure in it.
@@Dwight-ht7ek I always turn the water on and then unwind it and it kinks everytime. I threw it away because it also formed a hole it in after just a few years.
The name 😂 though we all know he loves it get in there you topmechanic 😂
Is it a vinyl or twill?
Both tops were vinyl.
How you remove that 10mm bolt so easy? I got everything but that thing out. O ly thing holding me up rn
U puts clears coats on ?
Yeah but it was a light matte finish.
Good luck getting that in the motor with the stretched out nylon (white band) it won't go in and if it does it will leak .
I did this video 6 yrs ago, no issues installing them back in the car and no signs of leaks. The car now at 165k miles. Did the same to Audi a year ago, no issues.
I bought this brand today. A huge storm came through, and literally everything was gone. Found these guys and curious about the taste. Guess we'll find out in the morning 🫤
I would be afraid that the bondo will break off when mounting the tire
yeah, no.
Nicer with the flat soft iron the gunmetal makes the jeep look like a Super Stock ass jeep.😂
I have my eye on the same rims and tires. Do I have to lift it? I don't want to lift the jeep. Will it still fit?
Hi, thank you watching, I have a 3" lift on mine, I don't know if they'll fit without a lift. They might but you'll have little to no wheel travel.
Thank you!
Straight to the point! 👏🏻👏🏻👏🏻
I gave the vid a thumbs up.... didn't add to the ticker....sorry...
Have a Rugged Ridge sailcloth top, pretty good, snare drum tight.
Can someone post the link to the wheel adapters please🙏🙏
www.roughcountry.com/product/configurable/wheel-spacers-1092c?gad_source=1&gclid=CjwKCAiA75itBhA6EiwAkho9e0fb8W5EfLMYNBHg1tt_k1YXZtouizWvBpPGD4fHuvdqo4IiqD9LCBoCqEIQAvD_BwE#211=621?|&||m||fit_first_1092RED-e
I’m a big fan of the flat soft iron but agree that the gunmetal was a better choice to match the jeep.
Just a quick weird fact. I bought these a few years and blew 16 teeth off on my radial arm saw setup. I couldn’t help but notice there was a foam swastika in the bottom of the case. Anyone else see that?
looks great. I have newer pintler wheels on my JL and I want to paint the silver (or tan), but nervous about F'n them up!
They both look good!!
1st thing anyone needs is how to loosen the tensioner. Also where exactly it is. Waste of time watching this. Remove and correct this!!!
The very part of the video says to use a 3/8" ratchet to loosen the tension and remove the belt. Do you not know how to loosen a tensioner or where the alternator is located?
Very helpful thank you for the video
Some thing that wasn’t in the video, I believe the spare tire brake light will need to be raised. This can be done with washers. No need to buy the extension light
Excellent vid. Thank you, very helpful. Has anyone used the stick on rubber flares with the stock fender flares?
showing you taking it off wouldve been very helpful you know
Yeah, but I didn't think to record until after I had it off.
Have you had any issues on thicker patches of Bermuda grass? Trying to decide between this one and the 212cc
No issues, most of my yard is Tifway 419 grass and this cuts through with no issues.
Nice!
why did you buy a spray gun when you used the spray can in the first place ?
I didn't buy the spray gun specifically for this job, I bought it for another job. I used it for the flares to spray automotive grade paint on the flares. The spray can was just adhesion promoter.
Why not just pick aftermarket wheels. Spacers, no thanks 🤔😎
Hi there, I had after market wheels and tires, 33x12.5R15 tires with 15x10 wheels but they road crappy. I chose these because of the price, 5 new tires with wheels for only $1,000. These only had 70 miles on them, the spare was never used. Just curious what is your personal experience with wheel spacers? Not what you've read or heard about them, but your own personal experience?
Great video, would you happen to have the link I would like to update my 1997 TJ also and put on JL wheels. Thanks
Hey how do u get the end price off
Hi, I'm not sure what end piece you're referring too, I didn't take any end piece off.
@@thingsido2924 it looks like it’s just an attachment ton the end of the hose the black and silver thing
I didn’t know if I could just take it off or not
The black part, is just a rubber sleeve, mine didn't come with that. The silver part at the end screws onto the hose bib. It doesn't come off unless you cut it off.
What lug nuts did you use ? The rims take larger lug nuts. Did you use the TJ lug nuts ?
Yup, I used the factory TJ lugs with no issues.
First I have to say very good video! Thank you! Because people like you is why RUclips is a great source for DIYers! I am it the process of painting my aluminum Jon boat. I went to Lowes and seen this paint and thought I would give it a try. I got the nickel color and it was too light. So I was thinking do I need to buy all the silver/gray tones to find the right one? Nope! That is what youtube is for so I looked on here and found a review video with the 5 or 6 different shades of silver/gray. I loved the Flat Soft Iron color the best so I went to Walmart to see if they had it and they didn't. They had a few of the other shades and also another one called Gun Metal Gray. But I could not compare it to the Flat Soft Iron. So I went on youtube again and said to myself what are the chances that there will be a video with someone comparing the Gun Metal to the Flat Soft Iron and here you are!!!! The Gun Metal looks very good on your wheels but I am going with the Flat Soft Iron for my Jon boat! Thanks again!!
Thanks for feedback, I'm glad you found the video helpful. I tend to like the color of the flat soft iron better than the gun metal grey because it has a richer tone and more metallic in it, I think you'll be happy with it.
Absolutely amazing. Great stuff
Appreciate it, thank you.
I was excited to find Hills Bros Cappuccino Sugar Free. But sad to say it doesn't dissolve completely. Tried various temperature of hot water. Unfortunately, the end result was the same.
I agree, I didn't like the sugar free one. The original is way better and dissolves fine.
Thank you berry helpful