Видео

not toyota, suzuki

Caliper is fine, only caliper bracket got abused 🤫 😁

@gherosh That was a torture brooo

I don't figure out what you mean ...

@gherosh dead center on cylinder 1 or 4

@@carlosschuldiner1910 🤣1 or 4 which one you like most, it's the same.

@@gherosh Thank you friend, I didn't know and no one had clarified that doubt for me, greetings from Chile

@@carlosschuldiner1910 1 and 4 are 180 degrees in front of 2 and 3, when both 1&4 are at TDC, both 2&3 are at B(ottom)DC. The trick is to align the camshaft with the crankshaft but the camshaft drives the spark distributor and spark distributor should be sparking cylinder 1. See the align red marks from this picture: www.carrepairdata.com/images/cars/timing_belt_chain/suzuki/g13ba.jpg

Wanna give it a try as many people praise Stihl, but not for me.

Yes, I know, but I see no reason to invest in a tool you only use once in couple of years.

​@@gheroshit costs about $10.00 hmmm

@@kevine9986 add a decent air compressor tool to that.

Full choke! 🤭🤭🤭

@@gherosh My God it sounds good

Thank you! Me too!

Thank you! Yes, I am Stihl hater, with all folks praising Sithl I said to myself to give it a try and boom: just junk! Not even close to Husqvarna.

@@gherosh Husqvarna looks like cheap Chinese saw compared to Stihl..

@@REDLINERUNNER Could be but not in my area.😐

Could be, but also iPhone is made in China, so no excuse to sell crap.

@@gherosh My S24 Ultra was made in Korea, all A series phones I had were made in CHN..

@@REDLINERUNNER Nice to know! 👍First I look on tools/devices to satisfy my needs, second my ego, to bad Stihl fails on both.

@@gherosh I have 4 Stihl machines all made in DE and in perfect running order... MS230 (2005), FS120 (2016), MS311 (2022), BG86 (2024)

@@REDLINERUNNER Glad you get along well with Stihl, I don't, have my bias I know.

Not funny, just my dummy opinion, donated to a Stihl fanatic, can't take money for a junk, Stihl it's just not for me.

Thank you! I didn't thought pins are so seized and I broke them, first time for me, next ones I know.

@@gheroshyou’ve got to watch out when you pre heat it. Pins will fly like a bullet. Hold it (pins)with a vise grip and move it back and forth( left and right). Perseverance is the key

@@gherosh put silicon grease instead of multi purpose grease…you won’t get stuck slider pin anymore

@@efivegauthierchryslercanad3066Thanks for advice! Got 4h+ of perseverance to get them out and 2 weeks of patience for new pins to arrive, I was afraid not to overheat and alter the metal strength, my fault was to break them. The problem was that pins rubber seals got cracked and then moisture did his thing. Using genuine toyota brake caliper grease 08887-80609, expensive like gold but worth every penny + of course, new rubber pins seals.

@@gherosh 👍👍👍👍👍

🤣🤣 no more Stihl in my yard, sorry!

good tools are made for noobs, over complicating simple things is just dumber not smart

​@@gheroshyou overcomplited simpliest chainsaw ever, and its extremely good light weight chainsaw so you noob because you sitting and completely complaining while you could cut some trees down and make some profit

@@marcuslc7985 now way! peace of mind is more important than money, I give it for free to another Stihl fanatical

@@gherosh tell me then what is better than this saw or similar price in comparisor whats the best chainsaw in general???

@@marcuslc7985 the one you like and feel comfortable to work with, I am just not a Stihl guy, go with Husqvarna (the Mercedes of chainsaws) or Hecht (the fair one, best value for the money, without brand fee yet). Not a professional chainsaw user, other brands could be better or worst.

Very low power but good for engine breaking lubrication downhill

@@gherosh Mines quite cold blooded so ride off with the choke on if it still hasn't warmed up fully - produces some awesome 2 stroke smoke😁

@@dt125guy7 I use 16 to 1 fuel mix, quite smoky when cold and with big head, good on summer for cooling, not so good on winter, too much cooling 🥶

@@gherosh Not sure what fuel mix is on mine - responsive and rides fine when warm just like plenty of choke time when cold. Your runs nice🤩

Very soft, fagus sylvatica

Off the bike, something got wrong with it, pending diagnostic/repair 😳

G Parr Parrr! 🤣🤣🤣

Yes, lots of fun but you have to enjoy maintenance. I just don't feel as free on eWhatever comparing to any kind of internal combustion.

mulgi vacili 🐄🐄🐄

Great tip! Thank you! Hecht bar and chain seems good quality, no replacement needed.

Sorry to hear that! Maybe you can return it and get a fair brand.

Ja, ohne Kettenöl im Paket verwende ich das verbrannte Öl aus dem Automotor

Awesome! Thank you!

Back in ol'days where good chainsaws, our days there are better and cheaper alternatives.

I'm the next Lars von Trier, so you know! 🤣🤣🤣

Не делайте так, как я, я рискнул, в конце концов, это рассчитанный риск. После многолетнего опыта вы уже не применяете правила безопасности для новичков (google translate).

Dumb as I am I need a dumb saw. I have other meaningful things in life to think about. Not worth to sped my mental energy to operate an "intelligent" saw.

@@gherosh Crawl under a rock. The saw is fine.

@@achap6376 fine for you, not for me. Happy sawing!

🐓

Nechtěl jsem ji nutit během doby vloupání. Zůstaňte naladěni na arboristický klip :D

No that you mention it, quite psychedelic video I made 😵‍💫

Thank you! Good to know for next time.

@gherosh some people have a problem with clutch burning I think the springs are too tight. I had a belt drive straight shaft it used a bushing which burned up. If you can find springs that are not as strong it should last.

@@WillB-lv1xg Tried softer springs and smoked the clutch few times, it engages at lower rpm and stays more time on friction. It's quite step the mountain area I live in.

Thanks for the tip! Some performance parts on my shopping list.

@@gherosh I just got a new exhaust and it definitely helps very much.

Shitty, shitty! but it's my shitty and I am proud of it!

Sorry about that! There are tons of video and tutorials, hope you find one that explains better for you. Thank you! Good luck on fixing yours!

max. 10-12km/h (6-7mp/h) p.s.: I am fat, big displacement :D

Self explanatory video: removal of parts to reach the timing belt, replacing the timing belt taking care of crank and cam shafts alignment, put the parts back in inverse order of taking apart. As is a non interference engine very good for learning.

Removing is the hardest part in 99% cases when doing it for the first time, assembling parts back it's the same process in reverse order.

@@gherosh ruclips.net/video/WprT0H8PUfs/видео.htmlsi=VAbvpoJEl-D4-yT1

Indeed Sportyak Bic 245 it's nice micro boat, I do not know from where to buy in USA, I live in Europe; try google for it.

Thank you very much for your sincere response.

Indeed, not holding up in time, goes away quite easy.

In 4 years and about 20,000km/12,500miles, 60% on road / 40% off-road use - the treadwear is about 80% (20% used), budget tires, worth the money (at least for me), the best budget compromise all terrain/all weather tire when you don't want to change tires all the time, less noisy on pavement big + for a noisy car. Had only one puncture with a self tapping screw and I went in some nasty rocky/briery places. Fair on snow, not so good on ice, but it's a compromise, one of the best. ✌

@@gherosh Thank you so much! Just the kind of information I needed. Truly appreciate every bit of it. Nice truck by the way. Cheers!

@@bravosixgoingdark9337 Glad I could help!🤗

@@gherosh Thanks for the response, you got yourself a new sub! Lovely Suzuki offroad playlist btw 🤗

Thank you! @@bravosixgoingdark9337

Friendly with your back, lightweight and small chainsaw, you can do even your fingernails with it. 😀😃😄😁😆😅😂🤣

Thanks! Yeah! Mo powa, babeh! mo powa! Wanna try 56 tooth sprocket next. U2 ride safe!

Cornfield is in Romania, near Fagaras (45.84791296750335, 25.03658230427664). UTB 650 was the most successful model produced at "Uzina Tractorul Brașov" known internationally as Universal Tractor Brașov 1946-2007. This tractor from the video was build around 1980, more than 40 years in active service, had a few engine rebuilds, one drive train rebuild and power steering upgraded.

@@gherosh your area, the lands look good for production farmers and I have lived in the GREAT Lakes region of USA. most of that land looks like your area good for farming.. I'm happy to know you have a good tractor and can keep it running. Thanks for sharing your videos. Have a great new year. Peace to you and your family, PEACE.

@@josephmurray3583 Thank you! You too! Let there be a peacefully New Year for everyone! 😊

48 tooth sprocket excellent for hill areas, for mountain areas more torque needed.

​@@gheroshthe 44 is perfect for most situations even pulling my trailer up the steepest hills around here the yd 100 is what you want for reliability

with more than 12% slopes around me even 48 tooth sprocket is too small

Go for it! An old bike + ~$100 motor kit.

Agree, next time will do.

😀😃😄😁😆😅😂🤣 still fully fingered human 😀😃😄😁😆😅😂🤣

😅