Видео

Great questions, so the width of the centre part of the Snapa bar is approx. 16mm so plus a couple of mm for expansion and that would be the amount to deduct off each sheet. You only minus the deduction once from the sheet width as it is split 50/50 either side. Check out our polycarbonate glazing bars installation guide for more info: clearambershop.com/collections/snapa-snap-fix-glazing-bars Axiome® polycarbonate sheets are super easy to cut to size on site (see our how2 video) so if you aren't sure on the exact spacing they can be ordered oversize and trimmed easily. Hope that helps?

Hello Nigel, there are some standard polycarbonate sizes but stocked stores tend to be limited in size options. Check our our site below for the widest range of polycarbonate sheet sizes. Our Axiome Polycarbonate Sheets can always be cut to size for free, if desired, or trimmed down easily on site. clearambershop.com/collections/axiome-multiwall-polycarbonate-roofing-sheets Hope that helps?

​@ClearAmber Thanks for the reply, I'll have a look on the website see what's available, hoping to do it fairly soon when the weather improves. Thanks again.

Ok great. No problems, delivery is only 2-3 working days on our own delivery fleet so fast and reliable. Any other queries let us know.

Great question - yes, our Alukap XR glazing bars are very popular for and designed for use with glass. As you say, use the same installation method but no tape needed. Our Securbond Sealant is neutral cure so compatible with most glass types but double check this with the glass supplier based on any glass coatings you have.

Glad you loved the video 😊 Sekosnap secondary glazing is very easy to install . Well worth installing now to reduce heat loss and save on your energy bills in the coming winters. For more product details: clearambershop.com/collections/sekosnap-secondary-glazing-system

Hello, and thanks for the feedback! As you say, so many gutter installers and trades are loving Aluflow® due to its stunning finish, hidden brackets and affordable pricing. We designed and manufactured the system to be very easy to install. You can purchase our aluminium guttering on our site below. Feel free to contact our team there for help: clearambershop.com/collections/aluflow-aluminium-guttering

Yes, it's not usually required but if you wished to silicone down the edge of your glazing bars and polycarbonate sheets you could. It is important that you use a sealant that is compatible with Axiome Polycarbonate Sheeting - it is recommended to use our Securbond Sealant that we specifically designed for this.

Thanks for asking, Waheed. We are using our Securbond Silicone, this is a premium-grade silicone that has been specially designed for use on polycarbonate sheet projects. It is important to use the right type of sealant when installing polycarbonate sheets because standard sealants will attack the surface of the plastic. clearambershop.com/collections/alukap-xr-glazing-bar-system/products/securbond-silicone-sealant

@@ClearAmber that's not what you're using in this video 😀

True! This video was shot several years ago so unfortunately before we manufactured a solution to combat the all the problems caused by standard sealants. We have since released our Securbond Silicone to improve waterproofing, the roofing sheet lifespan and the strength of the seal.

Corramet Corrugated Sheets are robust and a lot quieter than metal corrugated or other alternatives. Specifically on falling coconuts it is a hard one to tell! Ultimately depends on lot of factors such as the weights, heights and support structure involved.

True - the exact fixing you should use depends on your wall substrate hence that step is indicative! Follow the exact same procedure for installing the Top Wall Flashing for Polycarbonate Roofing Sheets and tweak the single fixing step to suit. For example, you will need to pre-drill the wall when using wall plugs.

Well spotted - yes, it's easy to cut Axiome Polycarbonate Sheet both left and right handed! You're welcome :)

Great question, the most common way of installing the Top Wall Flashing is by using a crawling board rested across the roof, to spread the load. This works best on a polycarbonate roof where the crawling boards would sit on top of the glazing bars. For Corrugated sheets, it is best to install the roof flashing as you go along. As each sheet is overlapped secure the Top Wall Flashing up to that point. Always remember to take the necessary precautions when working at heights. Hope that helps?

Thanks very much for response, I wasn’t aware they were weight bearing as you describe. Just bought Corramet for my shed roof. Look forward to seeing it fitted 👍. Thanks

Glad you found it helpful! It is an easy and very common mistake to make to screw through the troughs of corrugated sheets (both bitumen, clear and Corramet) so great you found before starting.

Great question! It is always safer to go for more polycarbonate sheets at narrower widths for stronger resistance against rain/snow loading and wind uplift. This also helps towards making your lean to roof last longer. We would rarely suggest going above 1m widths and for thinner thicknesses, like 10mm polycarbonate, we would suggest much narrower than 1m. Hope that helps?

Ultimately, the right sheet width to use depends on the thickness of Axiome® Polycarbonate Sheet that you are installing (plus location/structure type etc.) so please contact our team directly via our website for more specific help: www.clearamber.com/contact/

Axgard® is a virtually unbreakable plastic sheet that is very robust, with unique qualities. Lexan is a brand name for a similar style of plastic sheet material so could be cut using this method also. Trust that helps.

Our Corrapol-BT is a corrugated bitumen roof sheet made from a mixture of synthetic and organic fibres soaked in bitumen. Another similar corrugated sheet type to consider is our Corramet® sheets which are stronger, albeit at a slightly premium price point. Learn more about both these roofing sheets below: www.clearamber.com/browse/sc-CORRAPOL_BTCORRAMETSHEETS-407/

Thanks Jeff, will pass the feedback onto our Video Team. If you need any help with your polycarbonate project just let us know!

Our Rock N Lock Flashings for corrugated sheets are available to buy through a wide range of Distributors and Retailers. You can also buy directly for us, the manufacturers below: clearambershop.com/products/corrapol-bt-rock-n-lock-gable-flashing Let us know if you need any more help?

Thanks, you can either use our Securbond Flashing Tape or Securbond Silicone Sealant to complete the final step of sealing of the Top Wall Flashing. For this video we choose to go down the polycarbonate sealant route, however, our Video Team may run a future video on the flashing tape alternative option.

Thank you for the question. We supply our polycarbonate tape through a wide range of distributors and retailers. You can purchase directly from us the manufacturer here: clearambershop.com/products/alukap-xr-anti-dust-breather-tape Please note, there are different thickness tapes for different thicknesses of polycarbonate sheets. If you are struggling please reach out again to our Teams. Hope that helps?

Using Alukap XR Fixing Buttons is optional and depends on the roof structure. They are primarily used to strengthen the installation of the polycarbonate sheets by securing to cross purlins where the sheets/rafter spacing is wide or the roof is in a windy location. With a sensible Axiome Polycarbonate width and thickness they aren’t usually required. Trust that helps?

Full Alukap XR Technical and Installation Guides can be read here: www.clearamber.com/browse/sc-ALUKAP_XR60mmBARS-221/

@ClearAmber also just wondering have you made any videos applying flashing tape.

Thanks Myles, we haven't yet, however, will pass the suggestion onto our Video Team for future. You may find this video helpful though in regards to the best way of flashing against the back/top wall on a polycarbonate roof: www.clearamber.com/news/135/How-to-install-Snapa-Top-Wall-Flashing-.html

Thanks Myles, great question. Using polycarbonate fixings alongside the Snapa Glazing Bars is optional. If you have a sensible polycarbonate sheet width and rafter spacing they won’t be required. However, if your sheets are wider or in an exposed location then the Alukap XR Fixing buttons can be used on purlins to reduce the risk of wind uplift. Hope that helps clarify?

View more about installing polycarbonate with Snapa glazing bars here: www.clearamber.com/browse/sc-SNAPASNAPFIXBUDGETBAR-238/

Yes, it would be possible to install your Axiome polycarbonate lean to from beneath, working across sheet by sheet. The challenge is the last polycarbonate sheet however, as you will need to be able to access the roof from above/beside to secure the last glazing bar. As your projection isn't huge you may be able to access from the front for this last panel. Trust that helps?

Yes, it is optional whether you screw the glazing bar back to the wall. In the main, installers don't tend to and just seal along the top edge with Securbond Silicone Sealant to prevent water from running down the side of the polycarbonate roof. If you want is quite uneven securing the wall plate back might be advised. Hope that helps?

@ClearAmber perfect thanks, starting my lean2 project this weekend ready for winter. 3.2m x 2.5 I'm doing lead flashing into the brick work so should be fine as it will go over the bars.

@ClearAmber Thanka for the reply I'll seal along the edge. Its going on a complete flat brick surface not pebble dash or anything like that ect.

Ok great, that will work perfect then. If you need any other help with your Axiome polycarbonate lean-to roof just let us know!

Thanks for the question. You are best to always install Alupave Aluminium Decking on a low pitch say a fall of 1:100 to ensure a good speed of drainage. Similar to flat roofing there is always a slight pitch. It is best to check with local regulations as well in case there are specific building regulations that apply for your location. Trust that helps?

Thank you for your question. We used our Alukap-XR End Stop Bar for sealing the ends of the polycarbonate sheets in this video. The benefits of using this product are that it has a good size down stand for creating a proper drip and also is aluminium for great longevity. How that helps? Here's the link to our video about installing the End Stop Bar: www.clearamber.com/news/108/How-to-Install-ALUKAP-XR-Endstop-Bar-.html

Yes, you would install a Snapa Top Wall Flashing to seal over your polycarbonate sheets at the back/top wall. This helps prevent water from running down the wall and creates a proper waterproof flashing. If you were using Alukap XR Anti-dust breather tape on the bottom of the sheets you would also use it on the top. We also have a How-to video about installing the Top Wall Flashing which you may find useful: ruclips.net/video/cHzVnv2VXv4/видео.html

Never a stupid question! Much like a flat roof, Alupave Aluminium Decking isn't laid totally flat but has a very low slope to help direct the water off the lower draining edge. Hope that helps? Yes, it can be used on flat roof and balcony decking applications.

Great question - it depends on your drainage set up. Most installers run into a hopper as that gives the most flexibility. This can be done either out the terminating end or by using an end cap both sides and creating a hole in the base of the gutter. There isn't a specific connector yet for downspouts, mainly because of the varying types available. For more information on our Alupave Aluminium Decking check the range below: www.clearamber.com/browse/tc-ALUPAVE-434/

@@ClearAmber Thanks. I have a 1st floor, raised balcony/veranda deck to repair and this seems perfect. It's currently done in Trex composite but has been put on a base of what looks like OSB which has swollen. That looks like an attempt to create a ceiling for the space underneath, stop stuff falling through the deck gaps. It's also been clad with uPVC on the bottom to make it look nice.

Ok, sounds like the perfect application for Alupave Decking! Plus, aluminium decking can significantly outlast any composite decking options.

Thank you Dav Nan - we appreciate it! You can find out more about our Axiome Polycarbonate Sheet and Snapa Glazing Bar ranges here: clearambershop.com/collections/axiome-multiwall-polycarbonate-roofing-sheets

Hello Richard, good question. It depends on your roof pitch (steeper means less overhang so the water doesn't overshoot) and also how far your gutter is sitting below the End Stop Bar. As a rule of thumb, people tend to aim for 40-50mm overhang for a polycarbonate roof.

@@ClearAmber Thanks for the advice its really appreciated.

Thanks for the feedback, Roy, it definitely is quite a heavy dance/techno track! Our Video team has noted your comment for future How to videos.

Thanks for the feedback Mark. The Corrapol Rock N Lock Gable Flashing is the perfect way to finish off the verge of a corrugated roofing, both clear and bitumen sheets. For more details on the Corrapol Rock N Lock Flashings please check the ranges below: clearambershop.com/collections/corrapol-clear-corrugated-roof-sheeting www.clearamber.com/browse/sc-CORRAPOLSTORMPROOFCLEARSHEETS-406/ Feel free to also get in touch with us directly if you have any questions!

Thanks for the question! Yes, Alukap-XR Glazing bars are designed to have concealed gaskets as this is better visually and also gives them greater longevity against weathering. This means on the bar gasket the longer flange faces inwards. Hope that helps explain?

Hello Paul, please find the full 'How to install Glazing bars' video below! Alukap-XR Glazing can be installed using the same method for glass or polycarbonate sheets: ruclips.net/video/QxxT4ffaWrQ/видео.html Full Installation guides can also be found here - www.clearamber.com/browse/sc-ALUKAP_XR60mmBARS-221/

Sorry to hear - they would be been perfect! The Corrapol-BT and Awnapol Bitumen roof sheets are very popular for pergola roofs! Our Corrapol Stormproof Sheeting is also great if you are looking for a clear corrugated plastic option and will outlast corrugated PVC sheets by years. www.clearamber.com/browse/tc-CORRAPOLCORRAMET-405/

Hello, sorry to miss your comment previously! Yes, the Corrapol Rock N Lock is designed for flashing the edges of corrugated sheets, like the Corrapol BT Bitumen Roof Sheet. www.clearamber.com/browse/sc-CORRAPOL_BTBITUMENSHEETS-407/ We'd love to hear more about the item you were looking for as I'm sure it is something our R&D Team would be able to create, if it's not currently something we offer! Please reach out to us via our website and we can assist further.

Please find our latest Axiome Multiwall & Twinwall Polycarbonate Sheeting installation guides here: www.clearamber.com/browse/sc-AXIOMECLEARSHEET-228/ If you are using Alukap-XR *Aluminium Glazing Bars* to install polycarbonate roof sheets then check out our handy how-to video: ruclips.net/video/QxxT4ffaWrQ/видео.html Or if you are using *PVC Snap Down Glazing Bars* check out this how-to video: ruclips.net/video/Xte2_BbP-JU/видео.html

Thanks, that is a good idea as well. Remember to use the compatible Securbond LMN Silicone Sealant when sealing Axiome Polycarbonate sheets!

Thanks, there is no right or wrong so just go with what works best for your polycarbonate roof and installation!

thats not good

Sorry to hear that Brian! There is always a risk of leaks when installing fixing buttons that is why for most applications, when you have good rafter spacing, you can install polycarbonate sheets with just glazing bars and no need for fixing buttons. For example, Snapa PVC Glazing Bars or Alukap-XR Aluminium Glazing bars. If installed 100% securely then 90% of the time they are effective. www.clearamber.com/browse/sc-SNAPASNAPFIXBUDGETBAR-238/ www.clearamber.com/browse/sc-ALUKAP_XR60mmBARS-221/

Thanks Cliff, glad you enjoyed our how to cut Axgard Polycarbonate Sheets Video! Keep your eye out for further releases from our Roofing How2 Video Series! Any other How to's you would like to see from us?