Видео

A short video documenting the procedure to safely remove a coil spring from a vehicle. In this case we are replacing the lower control arms and front springs in the boosted 1980 Ford Thunderbird. The procedure would be similar for any fox body or mustang. I've upgraded to SN95 Mustang front suspension, as there was nothing available for the 1980 thru 1982 Ford Thunderbirds.

late night after ubering, video show casing a couple of fox bodies in the garage.. 2012 Brembo Mustang powered by the 5.0 coyote 4 cam engine. Also the boosted 408 Ls in the 1980 Ford Thunderbird..

A short video detailing some of the specifications & features of the 1980 Ford Thunderbird with a boosted 408 LS providing power, underhood, interior & the trunk are examined.

Procedure and documentation showing the procedure for removing the boost or charge pipe from the 2021 Kia K5 1.6 engines throttle body. It's a bit tricky but the wire retainer has to be lifted from each side then slide forward, to pull the charge pipe back from the throttle body opening. We can then spray throttle body cleaner or brake clean in the throttle body. This will help if the engine ha...

Using my Huawei GT 2 sport health watch to monitor and record my average yearly heart rate and blood pressure, coupled with the free Huawei health app on my android phone. l like to stay fit and healthy as it let's me be more efficient while designing and building cars. Also you can crawl under over and have the stamina to do all the different jobs involved in completing any hard job involved i...

Short video documenting an 8 second 1/4 mile pass by the quickest full weight Trachawk in the world. This one is powered by a twin turbo power house and gets that power to the ground via a very heavily modified and strengthened drive train. Big changes coming shortly for unbelievably even more power and most definitely even faster times. Thanks all for watching and your continued support....

A little side project late one night after I was finished ubering for the night. l like to stay fit and healthy as it let's me be more efficient while designing and building cars. Also you can crawl under over and have the stamina to do all the different jobs involved in completing any hard job involved in the process. Cardio is also very important to keep the blood flowing and the heart health...

Short video documenting the easy replacement of automotive 12 volt incandescent light bulbs with much brighter and energy efficient LED bulbs. These LED bulbs can be used to replace turn signal indicator lights, brake lights, under hood lights, trunk lights and certain interior lights. These LED bulbs can be used with the existing sockets and wiring. This makes replacement very easy and conveni...

Short video to demonstrate the procedure for changing channels ( live engine / transmission data ) such as boost-psi, manifold air temperature-mat, air fuel ratio-afr, RPM, fan control, throttle position-tps, transmission line temp, transmission torque converter lock up status, transmission gear, coolant temperature, etc in real time, displayed on the Terminator X-max's 3.5" display screen. Als...

Short video to demonstrate the procedure for retarding the timing per pound of boost, on our Terminator X-max controlled boosted 408 LS engine in the 1980 Ford Thunderbird. This simple quick procedure applies to all LS engines controlled by the Terminator X-max or the Terminator ECU's.I had a tune that worked well created on my PC on the ECU. Took the car for a drive as it was quite warm. I not...

Unedited video documenting and making sure that both engine cooling fans come on as programmed with our Terminator X-Max ecu controlling the engine functions and parameters. Installation of the new LS in a fox body radiator and dual Derale cooling fans from Summit Racing, on the boosted 408 LS in the 1980 Ford Thunderbird. A much more in-depth video documenting the actual build of the cooling s...

An intimate unedited, mechanical & operational demonstration, on this leisurely ride around the neighborhood. Full power was not transmitted as the transmission was not fully broken in and was bowing out going into limp mode as to much input torque was being sensed. The tune still has to be optimized in conjunction with proper transmission function, so we can experience the full potential of th...

Documentation and procedure for replacing the factory lower control arms on the boosted 1980 ford Thunderbird. Procurement of a set of new BMR lower control arms designed for the SN-95 mustangs ( 1994-2004 ). Summit racing supplied control arms part number BMR-AA040R installed to improve handling and ride quality on our boosted 408 fox body. Extreme caution should be practiced when working with...

A brief update video documenting the installed Baer front brakes, and necessary SN95 spindles installed to replace the factory 1980 to 1982 Thunderbird units. This was required as there were no aftermarket brake systems designed for the aforementioned Ford factory spindles. Also a quick review of the accompanying steering modifications also required. The BMR lower control arms will be installed...

New PTFE #10 fuel feed line installed, runs much better, no more stalling in reverse...

Boosted 408 LS burnouts, and AEM GPS speedometer verification

Boosted 408 LS digital speedometer and power window motor replacement

Rear main seal Replacement in our Boosted 408 LS

Boosted 408 LS first drive, with burnouts and cops on my ass

408 Boosted LS 3rd Start & coolant finally circulating & exhaust note

408 LS & 100 LB PER HR fuel injectors 2nd start & systems verification

408 LS & 100 LB PER HR fuel injectors first start

Fox Body Fords Terminator X Max wiring Harnesses Routing

Holley Terminator X Fuel injector selection & testing Procedure

LS Balancer ( Harmonic Damper ) installation tool, Garage Fabricated with Damper install demo

Piston Protrusion Above the Block Deck, & Head Gasket Thickness Verification

Piston Deck Height determination for Proper head gasket thickness selection

Turbo Hood Scoop, Cold air induction, fabricated Cheap & Easy in the garage

Wolves in the neighborhood, eating a rabbit he caught, footage captured, while I was out Ubering