![Richard Bailey](/img/default-banner.jpg)
- Видео 64
- Просмотров 47 253
Richard Bailey
Добавлен 23 июл 2011
Initial upright analysis using ANSYS
In this video lecture, we will learn how to set up the simulation for the left front upright of a car using ANSYS software. We will start by importing the geometry of the upright and defining the material properties. Then, we will apply the boundary conditions and loads that represent the real-world scenario. Next, we will mesh the model and choose the appropriate solver settings. Finally, we will run the simulation and analyze the results. By the end of this video lecture, you will be able to perform a structural analysis of the left front upright using ANSYS.
Просмотров: 324
Видео
Importing, modifying and outputting Step files in Creo Parametric.
Просмотров 1,5 тыс.6 месяцев назад
In this video, you will learn how to import the upright geometry from a step file into Creo parametric. You will also see how to remove some mass from the component and assign a material to check the mass value. Finally, you will learn how to export the file back into a step format.
Reimporting modified files to ANSYS
Просмотров 4446 месяцев назад
If you have already created a simulation in ANSYS using step files, you may want to update your geometry without losing your setup. This video will show you how to reimport your step files into ANSYS without having to redo the entire simulation setup. You will learn how to use the Refresh Geometry option, how to check for any changes in the mesh, and how to run the updated simulation. This is a...
Creo Walkthrough Landing Gear Assembly.
Просмотров 5347 месяцев назад
Detailed guidance unfolds in this video, offering step-by-step instructions for creating the landing gear assembly. Follow along and master the process with ease.
Creo Walkthrough Frame Assembly
Просмотров 5517 месяцев назад
This video presents a detailed walkthrough, guiding you through the step-by-step process of crafting the frame sub-assembly from the landing gear assembly using Creo Parametric.
Creo Walkthrough Actuator Assembly
Просмотров 4517 месяцев назад
Unlock the intricacies of crafting the actuator sub-assembly featuring a side mechanism from the landing gear assembly in Creo Parametric. This tutorial provides comprehensive, step-by-step instructions to guide you through the entire process.
Creo Walkthrough Strut Component
Просмотров 5017 месяцев назад
Comprehensive guidance provided in this video walks you through the process of creating the strut component (ENGD006) for the landing gear assembly using Creo Parametric. Follow along with step-by-step instructions for a detailed tutorial.
Creo Walkthrough Lower Link Component
Просмотров 5367 месяцев назад
Comprehensive guidance provided in this video walks you through the process of creating the lower link component (ENGD007) for the landing gear assembly using Creo Parametric. Follow along with step-by-step instructions for a detailed tutorial.
Creo Walkthrough Lower Strut Component
Просмотров 3527 месяцев назад
Comprehensive guidance provided in this video walks you through the process of creating the lower strut component (ENGD005) for the landing gear assembly using Creo Parametric. Follow along with step-by-step instructions for a detailed tutorial.
Creo Walkthrough Upper Link Component
Просмотров 6347 месяцев назад
Comprehensive guidance provided in this video walks you through the process of creating the upper link component (ENGD004) for the landing gear assembly using Creo Parametric. Follow along with step-by-step instructions for a detailed tutorial.
Creo Walkthrough Ring Component
Просмотров 5807 месяцев назад
Comprehensive guidance provided in this video walks you through the process of creating the ring component (ENGD003) for the landing gear assembly using Creo Parametric. Follow along with step-by-step instructions for a detailed tutorial.
Creo Simulate Introduction
Просмотров 60610 месяцев назад
In this tutorial, we will learn how to conduct a basic stress analysis on a rectangular specimen with a circular cutout using creo simulate. We will use the tensile loading condition to evaluate the stress distribution and deformation of the specimen. Let's get started.
Activate Tolerance Settings - Creo Drafting
Просмотров 901Год назад
If you want to use geometric tolerancing in your Creo parametric models, you need to enable this feature in the settings. Geometric tolerancing allows you to specify the shape, size, orientation and location of your design elements with more precision and clarity. In this tutorial, we will guide you through the steps to activate the geometric tolerancing in Creo parametric and explain how to us...
Using Ansys
Просмотров 5672 года назад
ANSYS is a software tool that can be used to perform finite element analysis (FEA) of various engineering problems. In this example, we will use ANSYS to solve a simple tensile problem, where a rectangular bar is subjected to a uniaxial load.
Thank you for the video, Mr. Bailey!
There is a minor error with the drawing used in the review. Please see the assignment document for the correct drawing. You should have Rev B as the correct drawing. The steps in the video are accurate for the correct drawing and give the volume required.
Hi Dr. Bailey, thank you for creating this video series. I just wanted to point out a discrepancy between the plan diagram at 0:25 and your model at 8:22. In the plan diagram, the 15mm line starts from the center of the D6.5mm cylinder. However, in your model, you started the line at the very top of the D6.5mm cylinder. I found this as I was trying to construct this piece using only the plan diagram, but could not obtain the required volume of 11816.53mm^3.
Good point! I have update the drawing with the correct value, please re-download the assignment document.
Will do, thank you very much.
loved it. real simple. keep it up bro
Appreciate it!