Видео

Hi Boss, kena tau blackout berapa lama, mungkin battery sudah kong, boleh cuba guna external battery charger utk charge balik battery tu

Hi Bro, you have to confirm your arm size is standard arm which is 99-100cm (hole to hole) when full open, 69cm when fully close.

@seglobaltech when fully close hole to hole was 630mm, fully open 922mm

@@yanglee6151 the wall bracket length?

32-32.5inch from pillar

@ oh? also got different size for the bracket? i though same for all lol

@@amirulakmaljopeny1265 speed adjusted by transformer, voltage mAximum 13v 0v 13v

please contact us at 6016-5264628

about 75% of the motor

@@seglobaltech Thank you for the reply, is the oil for lubricate the gear or to cool down the motor? Do you have video to show how you repair the motor, replacing the oil seal, bearing etc?

hi, let us prepare u a new video

@@gcvoon286 any gear oil or engine oil will do

@@seglobaltech Thank you, have a nice day.

@@seglobaltech what is the purpose of this oil? to lubricate the gear motor operation? light yellow or pink colour?

​@@gcvoon286to lubricate gear and keep the motor temperature low

@@seglobaltech can use hydraulic oil sae10 or not?

10.5mm

Thanks for coming

hi boss, do you mean how to replace battery?

Hi Boss, you can refer back to your country distributor ya. TQ

hi boss, you can contact /whatsapp us at 6016-5264628

simply just make sure the door in closed position, turn off all power including battery, then power on again, press the remote, the board will auto count. wait the gate fully open and stop, then press remote again to close gate. Reset done.

@@seglobaltech so this board is auto self learning?

@@johnmonk3381 yes, there is a counter sensor which will measure the distance

battery is just a backup

What is the problem if fully closed and pressed open, the gate motor turn for 2 second only and then start closing back?? Counter problem?

@@johnmonk3381 you can try to adjust the 'overload' to higher, then do the reset process.

@@seglobaltech the counter light didn't turn on. So must be counter problem?

@@johnmonk3381 yes, so you can check the counter sensor problem or the counter sensor's wire to board problem.

boss boleh contact salesteam kami ya, 016-5264628

sure, you can install on top or middle of the gates

Hihi, for Iphone: can try to restart phone first. for Android phone: if using 2 simcard, switch the non-data sim to 2G or 3G in phone setting.

@@seglobaltech it is a dual sim android phone. But i m using just one sim. Slot Sim 2.

@@sathyenkamalakshan5360 you can directly contact Bluguard technical dept at 03-80791919 for futher details. TQ😊

@@seglobaltech thank yiou.

@@sathyenkamalakshan5360 U are welcome🤝

Sebab xleh buka n tutup

@@AbuBakar-nf2xo tiba-tiba remote xboleh tekan ke?

sorry boss, saya tak faham soalan ni

hi boss, 35inch ni kami yg kira, tapi 35inch ini hanya boleh diguna dengan arm size 99-100cm(lubang ke lubang ) saja bila arm buka habis. pangjang 69cm masa tutup.

Kalau untuk pagar yang bukak ke dalam ukuran berapa bos? Arm bukak habis panjang lubang ke lubang 90cm, masa tutup arm 63cm

Boleh tengok 2:10, 2 wire suis rumah tu sambung ikut warna putih dan warna kelabu yg sebelah kanan.

kalau suka channel SE.U, tolong like and subscribe ya..Tqtq

@@seglobaltech sudah subcribe boss

@@midsuwelding TQ Boss

Bang boleh whatsapp saya untuk beli barang tu. 0165264628

Hi boss, memang kena ikat kuat.

Sy ikat kuat dia jd mcm sgkut2..

@@Bromi88Size nut dengan screw tak ngam kut...

Dh ok ltak grease tq2

if got dip switch inside remote, just adjust it and reprogram into the board

halo, if you are using the same control panel like us, you can try to change the 12v 7ah battery first. if still cannot work on remote, then you will have to add external remote receiver

Kalau buka dalam, ukuran letak bracket sudah beza. Arm motor buka semua jadi pintu tutup, arm motor simpan jadi pintu buka.

Correct boss, but this P2P module got 2 types, LAN type and Wifi+LAN type

是timing调不对还是安装时不对？

你好，那是因为安装bracket的尺寸不对了，导致motor 门开完了，但是motor还没出完

Hi Boss, we can deliver to Singapore, kindly please contact us at Whatsapp +6016-5264628 for more details, TQ.

Boss boleh beli 1set remote baru dgn receiver je...jadi tak kisah frequency apa pun..

@@seglobaltech TQ for the advice, saya gi kedai tanya satu remote rm50 belum masuk charge technician mari rumah setupkan. last2 beli satu set online pasang sendiri dapat 3 remote n reciever. harga tak sampai RM60.

haha... yang penting problem boss boleh settle👍🏻👍🏻 Kos barang memang tak mahal, tetapi profesionalisme tu tidak dapat dinilai dan bukan percuma, mereka mesti ada caj la..

Hi Bro, kena check counter sensor tu function ok tak?

kami panggil rivet tools

auto gate boleh buat dual mode? means kalau off kita boleh swing pagar manually. kreta sering parking depan gate, mcm bermasalah pula klau pkai auto gate 🤔

@@amincybernik7834 kalau power sudah off, kena release motor arm tu guna manual

you can always connect a backup battery

Hi Bro, cara ni sama juga untuk swing gate, tapi you kena confirm size arm tu adalah standard arm : 99-100cm (hole to hole) when full open, 69cm when fully close.

@@seglobaltech Thank you very much. Boleh saya tahu berapa lama masa keseluruhan untuk proses pemasangan?

@@jeevankrishnan17 if fast, 1hr can done, if slow then need 2-3hrs

We don't have the connector on board, but it can be connect to the screw at board or the metal layer of underground cable

oh, panel ini mesti tutup sampai habis, kalau nak sentiasa stop dekat 17kaki, kena tukar panel dan tambah limit switch

@@seglobaltech so without limit switch, using this panel can i set counting sensor or timer to stop gear from rotate. where exactly to set?

@@AseanPeaceGamex nope, it can only self counting

@@seglobaltech tq boss

@@AseanPeaceGamex u r welcome... tolong subscribe channel kami ye... tqtq

Hi Boss, you need to connect a relay from the 2 pin connector in the middle part (written AUX relay)

@@seglobaltech I see an omron 12v 5pin relay connected to AUX. is that relay sensing daylight as the pillar light only comes on at night when auto gate is open?

@@seglobaltech and if the lights randomly come on during day time and now at night doesn't light up, is that the relay issue?

@@tomsclim72 if you want the pillar light always ON, you can find the light sensor/photo sensor and cut one of the wire

@@seglobaltech boss, I actually want the lights to turn on at night only (as normal) when auto gate is open. Question: is that 5-pin relay the light sensor or is there another sensor connected to the AUX..I only see the relay 🙏🙏

We are in Ipoh

maybe because of the counting sensor not working, u can try to reset the gate and let it recount

Hi Ihsan, are you referring to the opening angle or speed?

@@seglobaltech oh sorry i mean angle.

@@ihsankhalil2758 Opening angle adjusted by the bracket, u can follow our technique if your arm motor size is 99-100cm when fully open

M8

@@seglobaltech boss kalau mau hire you pasang boleh ka

@@frogwater09 kalau rumah boss dekat ipoh boleh lah

@@seglobaltech aiya jauh haha okok ta

mungkin O ring rosak, atau minyak tambah terlalu banyak, kena check motor dulu baru tau

@@seglobaltech dkt 10 tahun dh motor tu.. xpenah tambah myk lg.. bole bg link mengenai oring tu.. ada reference sng skit nk cari kt kedai nnti.. start leaking 5 bln lepas autogate bila dh tutup rapat then geer akan sentak 3-4 kali ..

@@anip137 motor boss brand apa ya?

@@seglobaltech jenis E8 kalau xsilap. Sbb housing , base gearbox , motor nampak sama

@@anip137 oh boss, E8 tak sama dgn brand dalam video, tapi kami motor yg boleh replace terus motor E8 ya

早啊老板，有兴趣的话可以联系我们哦 WhatsApp 0165586428