Видео

@@stephenswinton8143 I’m sure they’re working on something for the 24’s 🤘🏻💪🏻

Thank you. Glad it was helpful to you.

@@jamesalberding6889 just follow what I did and you’ll be kosher 🤘🏻

Immediately started doing my automap. That’s what it needs to start learning and writing your map.

@@Gimps_Garage I’m not sure if my mechanic has already initiated the auto map. I will try and check myself

@@mobkinq if you have a PC laptop. You can do it yourself. It’s super easy. I explain it in the video

The clutch and brake covers worked great. Just use your stock diagrams. The ones they send with their caps are garbage and melt. I had brake fluid leak all out one day.

@@rbljackson ruclips.net/user/shortsdrykfA_jqa8?si=z9vI4iBy8oqctNQb

@@Gimps_Garage thanks....i was afraid of that. Did the other components hold up ok though? I will pass on the res covers. But thinking about the shift linkage and shifter rod components with the black and orange accents

@@rbljackson yeah. Everything else held up well.

They did. Until someone stole my bike a couple weeks ago and the police found it the following week. Completely gutted and stripped down to nothing.

It was speed kings. It’s in a few other comments as well 🤘🏻

@@jessegarcia2228 not really. Because I’ve given other viable and solid options of places to purchase from. But yes, it was SK’s

@@michaelhudson303 meh. The juice is worth the squeeze. Good things don’t come easy. But the process really isn’t all that bad. Especially if you don’t have a great dyno guy readily nearby

@@WilliamJohnson-gw2ux they definitely loud and deep and they upped the torque by 10 points

@@JLMann5882 thank you, glad I could help. These are the levers I’m using and they’re fantastic: ruclips.net/video/AwYKpLS15n0/видео.htmlsi=EsE97R2s_dzlX4FH

@@Blazedontwos agreed. Hale speed makes really high quality parts. I had my top caps for my brake fluid fail (nicecnc) and leaked brake fluid all other my bike. Luckily I noticed fast and got it wiped and cleaned off. But ever since then, I took 90% of their stuff off my bike. Still have a few things.

@@Gimps_Garage wow no shit huh! That sucks, sorry to hear that dude. Also things I have from NiceCNC are the spark plug covers for the engine & the vented transmission top cover that I haven’t installed yet 🤷🏼‍♂️ what’s your thoughts on the vented transmission top cover from NiceCNC?

@Blazedontwos I had already installed the check m8 from trask. I am honestly not an huge fan of how niceCnc’s system looks compared to the trask version. But if it works equally, then it’s worth the saved money imo.

@@hibyhihi2881 thank you. turn signals came from #CustomDynamics

@@OnyxCVO hell yeah. Definitely not the worst thing I’ve ever had to do. But definitely tedious work

@@Gimps_Garage Agreed, but the outcome is permanent and very rewarding.

@@michaelthompson7001 just a clear waterproof moto lube. This is the stuff I use and it doesn’t need much. amzn.to/3yHR5NZ

@@michaelthompson7001 appreciate the support. I didn’t use any of the thread sealant. I never have on my breathers. Just did the standard thread lock on the necessary bolts

@@Gimps_Garagethank for your response , I also have the Trask tranny cover, since it’s been about a month since your install, are you having any oil mist in your air cleaner, as I do not necessarily want to install the head breather kit either, trying to keep my vacuum, thank for your help

@@michaelthompson7001 a very small amount. But that’s only if I’m really hammering down on my bike or go up the canyons and gain 2-3,000 feet in elevation. But it isn’t enough to where I’ve needed to take the filter off and clean it. Just a small amount that hits the glass.

@@jasenhaynes8164 not quite. But close. Further west of SLC

I see, I’m up in the Ogden area, that salt lake area seems the same to me lol. I enjoyed the video and buying those light thank you

@@jasenhaynes8164 yeah I’m out by stansbury. Tooele county

lol you realize I also pay full price for this stuff right? If you want to buy it. I’ll sell it. But I have no problem hanging onto them as backups

@@Gimps_Garage how much older cleaner kit black filter and velocity stack. m8 2022 stuff

@@richdonahoo8769 it was brand new. Took it off after the install video.

@@cj8172 hell yeah. That’ll be like a brand new bike for ya. Congrats and enjoy it. Thx for the support

@@donovanphoenix8322 just research, experience and working with these tuners for years. But yes, thundermax does have a troubleshooting type of website

@@Gimps_Garage oh ok that good to know. Do you know the website.

@@donovanphoenix8322 www.thunder-max.com/Support/ThunderMaxDocs.aspx

@@Gimps_Garage thank you sir

@@donovanphoenix8322 no problem. Happy to help

@@gvaldezcurrie setting? As far as your RPM @ idle? Or?

⁠I was asking if the same procedure for idle tune between M8 and TC. I don’t remember that senecio on my initial set up. As far as the screaming children’s too late had to cut the old man where the sun don’t shine after the first half a dozen. Thanks for the follow up. Much appreciated

@@gvaldezcurrie oh gotcha. I see what you’re meaning now. Let me look into it and see if there’s a different recommendation for twin cams on the idle tune

@@gvaldezcurrie so from a quick glance. What I’ve seen so far is they recommend that the idle speed be set to 1k on TC’s. But the process of the idle tune is the same

Ok then. That’s worth knowing. I’ll get on it and thanks Again I really dig your attention to detail and your methodology keep them videos a rolling

@@STIFFRIDES oh dang. What was wrong with your bike?

@@Gimps_Garage the clutch hub completely stripped out.

@@STIFFRIDES damn dude. That sucks! Glad you got it fixed tho!

@@Gimps_Garage me to. Loving it. Now if only the temperature would drop from 100 I could go ride some more.

@@STIFFRIDES meh. Just go ride brotha. It’s been 105 here consistently

She does. Happy with how it turned out. 💪🏻

@@GK-bh1tp yes. It works very well. You’d have no issue doing that. I did it with stage 4 build

@@tentipiwildcamping the ones in the video are the 16” KST Kustoms spearheads. I now have Kraus Wolf One Pro - T bars and they are much better imo than apes.

@@bmacias You’ll want to call your local Harley store and double check in case it’s different based on your bike’s year… but the ones I got for my 2018. It was…. H-D part# 5207. That is for the well nut. Go to the hardware store and get a 10-32 1.5” screws. Harley chargers $4 per bot. Hardware store you can get them for 0.50¢.

@@bmacias You’ll want to call your local Harley store and double check in case it’s different based on your bike’s year… but the ones I got for my 2018. It was…. H-D part# 5207

Lmao why? Everything was straight