Видео

hi, and thanks for watching and commenting if you haven't already hit that subscribe button, and have a great day I honestly can't remember the cost if these units we see lots of cars every other day what I can member with these COIL packs is you are much better with an oe approved unit as some aftermarket coil packs can cause ecu failure so try and get an or approved part have a great day 😀

hi, and thanks for watching and commenting if you haven't already hit that subscribe button and have a great day no this one comes out from the top of the engine baybthisnwas a mark 6 or 7 front wheel drive if I remember correctly have a great day hope youbget your issue sorted

that's not a circip with holes in it for pliers. You can crack on all day long with pliers if you like on a half-moon clip with no holes but if you follow my method here were I reused the clip in the next part 2 of the video you can clearly see its in no shape mangled like you think you have seen if there were holes in the clipbinwoupd indeed use circlip pliers but since this type of clip does not have holes this is the only way to remove them safely without damaging them or rhe gear selector

@@cairney0037 Wooops! This is the first time for me working on a Ford and geees. The lack of quality engineering is atrocious. Working on an Alfa is a doddle. I think working on my old 66 Ford was easier. Even my Morris Mini was easy, once you made all the necessary mods for access. This gear selector is a case in point. I think a Uni Grad designed it.

@doraexplora9046 lol, well, these are Ford transits usually found in construction sites, so they get crudded up with mud and in Scotland we get lots of cold conditions in winter sonde get salt and grit on our roads wich destroys metal horrendous for cars and vans trucks etc thanks for watching if you haven't allready hot that subscribe and have a great day 😀

yea, we re tapped the pump threads just to be safe. It's sometimes not cheaper when your mate does it, lol 😆 thanks for watching and commenting if you haven't already hit that subscribe button, and have a great day 😀

this is not a 2023 plate transit in the video. What model year of transit are you struggling with?

thanks for watching and commenting. Have a great day. If you haven't already, please consider subscribing and have a great day

alright, alright, our kid, thanks for watching, and have a great day 😀

I hope you enjoyed the foo fighters also

you would love it, thanks for watching. If you haven't already, please subscribe and have a great day

hi, and thanks for watching and commenting. If you haven't already hit that subscribe button and have a great day, I get all my volkswagen audi parts from tps, the vw group trade parts centre I would recommend dealer parts they last longer if you plan on keeping it not sure where you are in the world or where would be best for you in your area the best gasket sealer I can recommend would be lock tight high temp but there are other equally as good products I am not endorsed bye lock tight ut if they happen to be reading this I would love come free high temp Blasck engine gasket maker with the squeazy nozzle that's the best in my opinion as long as everything is cleaned I usually let a sump drop over night if possible and then clean everything up spotless lots of brake cleaner lol 😆 have a great day

hi, and thanks for watching and commenting if you haven't already hit that subscribe button and have a great day if memory serves me right it 4 or six bolts and 4 plastic push clips fir the bottom cover

hi, and thanks for watching and commenting. If you haven't already, please subscribe and have a great day it would be easier to remove the fuel injectors for testing first, but if it's running fine, it could be the pump leaking Insode the timing casing it's not easy to remove the fuel pump some technicians take the engine out I just struggled on and removed or this one had x4 new injectors and genuine mercedes fuel pump fitted thanks again for watching 👀

@@cairney0037 Thank you for quick response. Liked and subscribed. Can you advise on the test to determine if the fuelling problem is being caused by the injectors? I believe some test do not offer conclusive results. I am hoping if the injectors are ruled out it the pump can be removed and just the seal replaced whilst attached to the vehicle. The van is currently on 171k miles and I'm due to head off on a trip in the van around Europe in a week or so! :(

@jareddesmier5351 the only thing that can be done on the injectors in place is a leak off test wich required special tooling to carry out this just checks all injectors are returning the same amount of fuel back to the tank what you should Donisthorpe have the injectors removed to see if the nozzles are leaking this could cause your rising oil level unfortunately there's not much you could replace on the fuel pump without removing if it I doubt you could even change the low pressure rubber hoses in place and they Re external so wouldn't like to thinkntjat would be your problem of your going travelling I highly recommend you get it into your local garage as soon as possible many thanks again for watching Stephen cairney CAIRNEYS AUTO SOLUTIONS LTD

probably thanks for watching if you haven't already hit that subscribe and have a great day 😀

why thank you. I will indeed need to get back to the editing life's been getting in the way as it does, lol 😆 thanks again for watching I've got a few more videos in the pipe line that just need editing big audi done ✔️ honda project also made some significant progress 😀

hi, and thanks for watching and commenting if you haven't already hit that subscribe button, and have a great day. It's most probably the same suspension set up. This one, if memory serves me right, was a diesel. The clutch we fitted to this one we couldn't source aftermarket, so was genuine vauxhall part but it was made bye sachs had Sachs engraved or stamped on the drive plate the subframe was removed on this model

@@cairney0037 Thanks a lot for the reply Cairney, keep up the good work :-)

@pietervanoeckel8249 Thank you man have a great day 😀

does it boil the coolant pretty instantly from cold? if so, then you're most probably looking at compression leaking into the coolant from the cylinders? Was the cylinder head pressure tested and skimmed to make it flat and true for the gasket to seal without seeing your car personally its just a guessing game 🎮

Cylinder head was done and pressure tested. I think the head was not done properly. Must redo the cylinder head again.

@thabisobaloyi7431 I would compression test the cylinders before removal that could shed some light on it if the compression is down

Thank u Sir, will do so

thanks for watching. If you haven't already hit that subscribe button and have a great day 😀

yes, English with a Scottish accent. Thanks for the comment. You're ever so kind. Have a great day

hi, and thanks for watching and commenting. If you haven't already hit that subscribe button and have a great day, it could be air, but without seeing the car, I would only be guessing. Try bleeding it again and see what happens

it's English, with a beautiful Scottish accent 😍 😀 thanks for watching and commenting if you haven't already hit that subscribe button, and have a great day 😀

yea, I did remove the subframe on this model. There was no aftermarket clutch available at the time, but when it came from the vauxhall psa group, it was made by sachs hope that helps thanks for watching and commenting if you haven't already hit that subscribe button and have a great day

hi, and thanks for commenting. If you haven't already hit that subscribe button and have a great day, it can be very difficult to diagnose a front diff best on a ramp with someone driving it and listening with a stethoscope but it could just be wheel bearing if you are on a straight stretch of road and tou steering to the right or left and the tone changes or decreases tou may be able to narrow the side down and hopefully its just a wheel bearing rather than expensive diff rebuild hope that helps and that's great tou could understand my poor attempt at English lol I wish I could speak another language have a great day 😀

@@cairney0037 Putting on a lift, at the rebuilders site, is the plan, aye 🙂

yea, I couldn't believe I read somewhere glasgow was the MURDER capitol of Europe. we lost that title, but now we're not in the European Union, lol have a great day mate thanks for your continued support. I'll need to get some non neime and dog related footage soon. all those police were gor a 15 year old teenager lol 😆

the sad thing is the lady taken it back and said there's a noise since the springs have been replaced they said that was normal she went back again and said I'm sorry I've had this car a long time it has never made this noise untill the work was done they said it was the seatbelts she said no why did they not make this banging noise before and she was escorted off the premises and banned from that particular nation wide franchise and yet it taken all of 2 seconds 2 find the human error fault definitely not the seat belt lol have a great day and thanks for watching if you haven't allready hit that subscribe and have a great weekend 😎

ah, thank you it's been crazy buisy so struggling to get the time to make them, lol thanks again for your continued support its much appreciated

ah, thank you man its greatly appreciated 👏 much love from Scotland have a great day Alan 😀 😊

thanks for being such a lovely human and driving traffic to this video. Have a great day 😀

Scotch egg

brilliant absolute belter nailed it 👌 if you haven't already. Please subscribe and have a great day

the finest Scottish accent central Scotland lol I can't help it I it can be a challenge for outsiders lol 😆 have a great day

I literally. Could not understand 87% of this. Lol Sounds like my son. When he's gaming hard-core and is super excited. Lol

@scottgarven9165 your son must be lucky to have such a beautiful Scottish accent. The ladies will love him when he's older, thanks for watching and commenting if you haven't already hit that subscribe button and have a great day

hi, and thanks for watching and commenting. If you haven't already hit that subscribe button and have a great day, it is available to order from mitsubishi, but it's very expensive. The customer sourced this himself from eBay. I hope that helps

thanks for watching. I'm glad I could help if you haven't already hit that subscribe button, and have a great day 😀

yea, we have another one in now. Suspect the pump in the tanks gone in this one we have in different faults this time they're getting more common now the urea issues on them hope you get to the bottom of it thanks for watching if you haven't already hit that subscribe button and have a great day

@@cairney0037 Engine light came on on Thurday afternoon, later that afternoon Urea warning. Topped up with Adblue at home. Friday still engine light, urea light, but now emissions warning, and later, 700 mile limit. I've got someone to look at it on Wednesday next week, and that's the earliest, even main Peugeot garage can't see me till May 1st. I'll let you know what the Mechanic discovers.

How is the veichle? Mine 308 has the same issue too now

@neopa06 hi, and thanks for watching and commenting. If you haven't already hit, that subscribe and have a great day yea this one was repaired, but this is an active garage. we see 1000s of vehicles every year so we don't remember all of them we hope you get ot repaired if you need booked in were on Scotland www.cairneysautosolutions.co.uk

@@cairney0037 I needed a new tank, NOX sensor, and to top it all off two front suspension springs.

Well, thanks for wasting your data 🙄 maybey get a professional to fix it for you if you're not capable 😉 😜 😀

thank you yea volvo is generally pretty decent. This has obviously been missed in a mot or something for it to get so bad it's a rather dangerous defect, lol 😆 thanks again for watching. Have a great day

hi, and thanks for watching and commenting if you haven't allready please subscribe and have a great day You would be best having it put on a diagnostic machine and confirming the fault without seeing the van i would be playing diagnostic bingo lol 😆 hope you get to the bottom of it

hi, and thanks for watching. Honestly, I can't remember what model code this mini was, but thanks for watching and commenting. If you haven't already, please subscribe and have a great day

hi, and thanks for watching and commenting. If you havent allready please subscribe and have a great day . If it's tight to retract the piston, it's best to just replace the calliper and clear all the fault codes and try again if this is an electronic handbrake ie. no manual handbrake lever in the car. I have seen issues with the park brake module located behind the rear bumper. I hope you get it fixed. Have a great day 😀

without seeing the car, I would just be playing diagnostic dart board, lol the only thing you can try is unplugging 1 at a time with it running. I'f the engine tone doesn't change. You've found your injector. I've had some new injectors require pressurising, but I never had that issue on these ones that I'm aware of. I hope that helps if you haven't already. Please subscribe, and thanks for watching

Thank you so much for the reply I will try tomorrow 👍 I will let you know how I get on. Also I have subscribed mate 👍

Had same isue for over 3 weeks,going garage from garage guesing injectors, fuel pump everyone just straching heads, at 1500rpm missfires today i went to lad witch colegue offered, so he just loughted and said give me half a hour, injectors just need to be recalibrated, he went to higway for relearn process finnaly everyting works pertectly, try checking on diagnostic what value says injectors if its 0, you got the solution ;) and everything happened after fuel filter changed...

@VyCkAaZ we had a transit today, which had glow plugs replaced, and after it was restarted, we had a squeaking noise and misfire, so we drove it it seemed to clear but few hrs later after bringing it into the workshop it was there again briefly the fuel rail was off for glow plugs so for whatever reason some injectors don't like losing there pressure and can have issues after a simple fuel filter change glad you got it fixed thanks for watching if you haven't allready hit that subscribe button and have a great day