Видео

Alexanne Land

Adams Center

Corbin Ville

Mills Loaf

German Land

388 Samson Trail

Mines comes one, then cut off, what’s the problem?

I have this exact setup and relay went bad and can definitively say that, contrary to some commenters about the three prong rotation theory, the bottom is common, left is start, right is run. BUT! Unlike tis video the extra "thermostat" wire tripped my breaker when splicing to the common, and the fridge and all its functions only worked with that extra wire connected to one of the power wires. Hope this helps anyone that was flummoxed like i

What about the Red wire on the new starter I know 1 hooks up on the right side . on the compressor i have a run capacitor , the top wire goes to the white, but the bottom wire goes to the thermostat .Do i splice the red to that? I would end up with 4 wires spliced together for the red wire on new starter?

Where should I connect the two wires (red and white) coming from the fan? I connected everything else but compressor is not on

Bro - thank you, thank you, thank you 🙂. I had the 3rd power wire as well and my compressor fired up as soon as I spliced it into the common wire like u described.

CSR is how to remember it. And then reading from left to right and down just like reading a book. In your configuration which is an upside down triangle. Common is upper left then reading across would be Start and the middle pin which is down the middle and down would be Run. This is based on my commercial refrigeration training.

Hi Everyone, thank you for the advice and input in these comments. I would like to say that I am not a repairperson and attempted this during the pandemic when I had no work - according to some comments, I did this completely wrong/backwards/dangerously. You may be right, I have no idea as I am not a repairperson! However I would like to share that it is May 2024 and my refrigerator is still running great off of this repair, sooo...🤷. Anyways, best of luck to you all and remember I have no expertise in this, just trying to get by and it seems to still be working. Perhaps next week my fridge will explode...😁

Thank you so much. I searched all over google and now help. You r a life saver.

Please note that there are a few major mistakes and issues in this way of wiring. 1) Your run and start wires (left and right on the compressor) are reversed. (If common is on top, Run is the right pin, if common is on the bottom, Run is the left pin.) 2) The black line connected originally to your bottom pin is one of your power lines (Hot). Your blue wire is your 2nd power line (Neutral), which was connected to the Run winding. The reason you have an extra wire is that you have a run capacitor. Your blue power line is also connected to one side of the capacitor, and from the other side you get the pink wire, which needs to directly connect to the compressor’s start pin. 3) Your run capacitor, which was supposed to be in series with your start winding, is now instead connected in parallel to your Hot and Neutral! So, you need to use the fridge black and blue wires and connect those to the 3n1 black power lines. And you should splice the pink wire to your 3n1 white wire to connect it to your start pin on your compressor. (and don’t forget your reversed Run and Start pins) I will be surprised if you haven’t damaged your run capacitor and compressor. Please either remove this video, or make another one with the right wiring to not misguide others. I appreciate your bravery and trying things out! You can refer to this video to fully understand it: ruclips.net/video/zqhkvXPjtKc/видео.html

Por dentro del arrancador como van conectados

Great video. My setup is I have 2 wires that connect to starter relay from the capacitor. I have one black one that connects and one yellow. I just ordered this kit. Which wires do I plug in the 2 black wires that's attached to the supko kit?

Thank you. I have had issues with mine. Finally bought this and noticed everyone only had 2 wires. Saw this, did what you said it started right up! Thank you

I think the red wire (Run) should switch to the white wire (Start) because the compressor connectors are upside down

După pornirea compresorului cum procedăm? Rebranșăm la loc compresorul la starterul frigiderului?.

Thank you very much! Super awesome info.... Much appreciated. 👍 Success!!

legend. thanks for this!

You wired the 3 to the compressor wrong flip the diagram upside down should be red black white from left to right

My issue is where is the power cables. Or source. This is what I have and wondering if we can just connect the 2 Blk wires to the orange and or white

Thank you for the comments.

I jus fix my fridge with the extra power line thanks for the video 🤗

The problem I see with all these videos is what about the on/off/thermostat switch on the outside of your freezer. You know that dial that turns on or off your freezer and you can set it to mid/high/low etc. Anyway the solution was simple. In its original configuration, two wires from the power go to the switch/thermostat. Blue and brown. A third wire coming from the switch/thermostat (black) provided 120 when there is a call for cooling. So simply connect the Supco 1 power lead to that black wire. The blue wire connect to one incoming power. The brown wire will connect to both the Supco and other power wire. Now you can turn off/on your freezer and thermostat control it.

From a contractor: To have a hard start kit installed on your compressor, you can expect to pay anywhere from $300 to $350. Our prices always include the cost of labor and parts. The overall price of a hard start kit is cheaper than paying for a compressor replacement which can be $2,500 or even more. $20 part, 10 minutes work.

Not to be rude, but adding a "power" to "common" makes no sense period. "Common" is Ground back to your electric provider. "Power" is electricity coming in from your electric provider. "Common" is the Path back to the Electricity grid.

Does this mostly fix lg refrigerators?

Had exact prob. Thanks.

YOU ARE A GODSEND!!! I spent the whole morning trying to install this thing and then... dang extra wire. Please please please label this one "Supco (U)RCO410 3-in-1 Installation - Leftover Last Wire Hack" for search purposes. I had to watch 12 before finding yours and watching to find out if you were going to have the same issue.

Great video. I wonder why the company has the diagram for white as the start, black as the common, and red as the run, but they have the wires coming out of the mechanism in the order of white, red, then black… Why confuse us? Is there a reason why it is out of order between the diagram and the physical wiring?

I also have 3 power lines on my GE side by side, just as you show on the video. I splice it into the common wire, it DID NOT work. Thanks for sharing.

Good Lord man you make that way more complicated than it needs to be. The thermostat turns on both the fan and the compressor. All you need to do is cut the two power wires and connect them to the two black power wires on the three on one. There is no third power wire. The thermostat is just a switch that breaks the circuit. Now, as far as the probes on the compressor if the common is on the top, run is on the right, start is on the left. If the common is on the bottom you just rotate that triangle so now the common is on the bottom, run is on the left, start is on the right .

Yes i do that but coming on and go kix

Yeah but what if how do you hook up the fan and the thermostat

I put on the 3in1 and now my fan next to it stops. I'm confused because every wire is correct. Thoughts on what I do wrong here??

So what about the capacitor already with the board and the starter

Mine has 4 wires? Three to starter relay , and then one to the overload ? Any suggestions on how I would wire that up with this part ? I have the part already !

I just tried it and my compressor just exploded… don’t try it unless you know exactly what your doing…

I appreciate your explanation of left to right with the start and run in relationship to the common. All the videos I saw had the common on the bottom. Mine is on top and I wasn't sure if I had to switch the order

How do you know that is the common from the two black in put wire I like to know

You must be from where joe Rogan is from

Needs a cow bell!