Видео

What if you have a blow out how do you get the metal out?

I just cut the entire business end of the caulk tube off, gives me a perfect 1-1/2” bead to cover up those unsightly gaps in the finished project. I’ve noticed that the drying time of the caulk is considerably extended however. 😂

shitty music is never needed

Hello sir , i want to know how you check big ac drive with small motor , or you have any dummy load thanks in advance

I have one question... should I remove the clamp from the battery or no

Hi, Im not sure if you still have this lathe, but im in the process of getting an old one running and im having a problem with the back gear. When i try and use the lever to engage it, i cant get the lever to pull out and then turn. Is there something strange about using the back gear, do i need certain gear levers in certain positions or something like that. If not, it just means mine is jammed

What is the LED SMD max 3.8V function for repair? thanks

Fantastic craftsmanship I wish I had your tools and skills, I'm just making my vacuum chamber for casting but I purchased a separate 12L vacuum chamber for degassing.. I actually ordered my 6" steel pipe 3.5" too long on purpose because I'm using 5" X 8" flasks and the extra 3.5" at the bottom is below the pump connection so if I get a blowout the molten metal falls to the bottom and can't get drawn into the vacuum hose!!

reboque de apenas uma roda precisa ter os eixos Y e eixo Z o eixo X não deve existir. estou fazendo uma para usar na minha moto. porem a minha é com propulsor elétrico que ao acoplada a moto, a moto se torna hibrida rsrsrs

What about fitting a shelve between two wall corners?

best part was the part about getting stoned in germany on a sunday hahaha

If you're doing this repair, be wary of the brightness of the new leds, don't make the mistake that I did that was putting "ultra bright" leds in the cluster. My dash went from having little light, to Christmas tree after the repair, I had to buy leds that are not so bright as the first ones, and once they arrive will have to perform the repair again. Other than that, perfect instructions.

Fooken legend.

Yeah, need to show how to separate the main body. Didnt go any further with video

I've been researching how to wire up a vfd for my recently purchased lathe and your vid is absolutely one of the most clear and concise ones I've come across. Super helpful, thank you!

Very nice video my friend!! I have a very similar Dutch model..and it is really very much copy of this design. How ever..one thing you missing..and that is the weight on top of the slide..it has a grove in it..and you have the mounting ear as wel... I have sadly on my channel not yet the rebuild of the machine..but another Dutch guy show t he same saw machine as I have..and you see, what I mean..Good luck!! Best regards from Holland! ruclips.net/video/AE2yqvlu6XQ/видео.html

Nice job lad , the only bit that was a bit dodgy was the after weld REAMING with sand paper lol Make the bung bit a push fit , cut slots ( odd number ,not symmetrical ) and use valve grinding paste . a lot more accurate .

I have the exact same problem with my 2012 Audi A5. I went to an Audi dealer and they told me they are not making the bulbs anymore. So, here I am trying to fix the issue by myself.

Very nice video, that little yellow transformer on the pcb is actually driven by that little 8 pin chip. That is a small fly back power supply. It more than likely does run straight of the pain rail on board. It’s a switch mode power supply. Unfortunately they didn’t install any common mode and differential mode inductors in the ac line. That’s crazy that they’re not on there.

lmao. "go ahead and remove 3 and break 1"

Thank you. This is amazingly simple (once you build the tool) and a very tangible method for those of us who are trig deficient -as I hang my head in shame. Best regards.

Как же это приятно когда человек работает, больше чем разговаривает хотя-бы в половину..... Тебе моё почтение,лайк и подписка!!!!! Вас таких мало!!!!

show us the metal

How about when you can't cut the shelf? I have a 4ft laminate shelf from home Depot and my new rental house apparently has janky walls :(

hi Dimitri, I'm a machinist for 50+ years and to say ''pro'' won't want to wach this is so wrong! we have all got to work with what we got to get the job done and that's what you did, no harm, no foul. i've done way worse things than that lol 😂 😂

Top showwww meu amigo. Ta de parabéns

Brilliant!!! 🤯 Thank you so very much for posting this video!!

Thanks for sharing. I'll be making one

Very impressed!!!

Hi Dimitri I also aquired a nice Weiler LZ 280 but I'm having a hard time figuring out the collet type the spindle bore takes. Are there type markings to be found on your collet set? Best regards Yves

Hi great video. My leds of the needle is also flickering. Do you know what type are the white leds. Thanxs

Legend!!

Can u still do this processes without taking out the connector for the hazards button. Mine doesn’t seem to want to disconnect?

I just bought the same vise, the Leinen E150 specs say it weighs 53kg, but my F150 didn’t feel as if it is 53kg, because I know I am not that strong to lift 53kg and carry up a flight of stairs to my 1st floor apartment😅 How heavy is yours?

Great work man

Perfect, man!

Class, thanks pal. Great tips

How much would you charge to make me one. I don’t have all the equipment you have

make a stronger boom like in the ibex bike trailer www.tradeinn.com/f/13734/137345254/croozer-traileri-bob-ibex-28.jpg

I dropped the screws like you told to and now I can’t find them. Thanks a lot!

How did you know that it was the LVs that was broken and not a fuse or something like that?

good video, I just can't find these LED's in the US

I like your bad jokes.

Which rate

Thank you for the great visual and explanation. Will be really useful with my current project!

This is helpful. Any tips for a pre-made shelf? I bought some Ikea shelving cubes and our wall is wonky AF ... I am debating mounting on plywood and carving the plywood as needed.

Hi, I have a question, you can definitely help me! Is it possible to replace the disk chassis from one counter to another? without the electronic part, simply the white plate + the discs + the needles.

Can I buy a broken dashboard for the same model, and put the led to the mine?

Just completed. Some came away easy but some were a pain but got there eventually. One smd was flickering so re soldered and working well now. There twice as bright as originals but easly solved. Just turn the dimmer down. Thanks Dmitri

A smashing trailer , if only I had a welder the know how how to use one as well as the space I might give it a go . Until then I will use a cargo bike .