![Perun Moto](/img/default-banner.jpg)
- Видео 68
- Просмотров 249 183
Perun Moto
Сербия
Добавлен 26 авг 2015
We design, test, manufacture and sell aftermarket parts and accessories for adventure motorcycles.
On our RUclips channel you can see how we use our parts with various moto equipment - rack-less luggage systems, top cases, roll and duffle bags, GPS units, phones etc.
On our RUclips channel you can see how we use our parts with various moto equipment - rack-less luggage systems, top cases, roll and duffle bags, GPS units, phones etc.
Kriega US-20 Drypack installed on KTM 690 Enduro
Walkaround and details - Perun moto KTM 690 2019+ Luggage rack with Kriega US-20 Drypack.
For international buyers, Perun moto products can be ordered from the links below:
-Top rack:
www.perunmoto.com/collections/ktm-690-enduro-enduro-r/products/ktm-690-enduro-2019-luggage-rack-sd
EU buyers, please visit following links:
-Top rack:
www.perunmoto.eu/collections/ktm-690-enduro-enduro-r/products/ktm-690-enduro-2019-luggage-rack-sd
More info about Kriega US-20 Drypack can be found here:
kriega.com/sports/touring/us-20-drypack19
Music:
"Fretless" Kevin MacLeod (incompetech.com)
Licensed under Creative Commons: By Attribution 4.0 License
creativecommons.org/licenses/by/4.0/
For international buyers, Perun moto products can be ordered from the links below:
-Top rack:
www.perunmoto.com/collections/ktm-690-enduro-enduro-r/products/ktm-690-enduro-2019-luggage-rack-sd
EU buyers, please visit following links:
-Top rack:
www.perunmoto.eu/collections/ktm-690-enduro-enduro-r/products/ktm-690-enduro-2019-luggage-rack-sd
More info about Kriega US-20 Drypack can be found here:
kriega.com/sports/touring/us-20-drypack19
Music:
"Fretless" Kevin MacLeod (incompetech.com)
Licensed under Creative Commons: By Attribution 4.0 License
creativecommons.org/licenses/by/4.0/
Просмотров: 72
Видео
Perun moto BMW F900GS Top luggage rack and Tie-down brackets with Giant Loop Mojavi saddlebags
Просмотров 15012 часов назад
Overview of @GiantLoopMoto Mojavi saddlebags installed on a BMW F900GS equipped with Perun moto Top luggage rack and Tie-down brackets. Note that this is not the newest version of Mojavi bags. Detailed write-up about fitment of Giant Loop Mojavi, with plenty of photos, can be found in our blog post: link coming soon For international orders, Perun moto products are available for purchase at: ww...
SW-Motech Trax ADV 38l Top case on BMW F900GS
Просмотров 238День назад
Overview of SW-Motech Trax ADV 38l top case installed on a BMW F900GS equipped with Perun moto Top luggage rack. This small-ish top case provides a compact storage solution, making it well-suited for day trips or short excursions. Write-up about fitment and installation of SW-Motech Trax top case, with plenty of photos, can be found in our blog post: www.perunmoto.com/blogs/blog/sw-motech-trax-...
Perun moto BMW F900GS Top luggage rack and Tie-down brackets with Mosko moto Reckless 80 (V4.0)
Просмотров 99614 дней назад
Overview of @MoskoMoto Reckless 80 (V4.0) installed on a BMW F900GS equipped with @Perunmoto Top luggage rack and Tie-down brackets. Detailed write-up about fitment of Reckless 80, with plenty of photos, can be found in our blog post: link coming soon For international orders, Perun moto products are available for purchase at: www.perunmoto.com/collections/bmw-f900gs/products/bmw-f900gs-top-lug...
Perun moto Tie-down brackets for BMW F900GS
Просмотров 29521 день назад
We have recently launched our newest product for the BMW F900GS. Take a look at how @Perunmoto Tie-down brackets fit the new GS. Upcoming videos will show how these, together with our Top luggage rack, work with various rack-less luggage setups. For detailed writeup, please visit the blogpost at our website: www.perunmoto.com/blogs/blog/perun-moto-tie-down-brackets-for-bmw-f900gs-design-details...
Mosko moto Reckless 10 on Aprilia Tuareg 660
Просмотров 1,1 тыс.Месяц назад
Overview of @MoskoMoto Reckless 10 installed on Aprilia Tuareg 660 equipped with Perun moto Top luggage rack and Tie-down-brackets. Detailed write-up about fitment of Reckless 10, with plenty of photos, can be found in our blog post: Link coming soon For international orders, Perun moto products are available for purchased at: www.perunmoto.com/collections/aprilia-tuareg-660/products/aprilia-tu...
Kriega US-40 Rackpack on BMW F900GS with Perun moto Top luggage rack
Просмотров 1,2 тыс.Месяц назад
Overview of @kriega8589 US-40 Rackpack installed on a BMW F900GS equipped with Perun moto Top luggage rack. This bag has adjustable size, from around 25 to 40 liters. It's shown here close to maximum capacity. Write-up about fitment and installation of Kriega US-40 Rackpack, with plenty of photos, can be found in our blog post: www.perunmoto.com/blogs/blog/kriega-us-40-rackpack-on-bmw-f900gs Fo...
Perun moto KTM 690 2019+ Luggage rack, Extension plate and Heel guards with Enduristan Blizzard XL
Просмотров 722Месяц назад
Overview of @Enduristan Blizzard XL saddlebags installed on a KTM 690 Enduro equipped with Perun moto Luggage rack, extension plate and Heel guards. Detailed write-up about fitment of Enduristan Blizzard XL, with plenty of photos, can be found in our blog post: www.perunmoto.com/blogs/blog/enduristan-blizzard-xl-on-ktm-690-enduro For international orders, Perun moto products are available for p...
Perun moto CNC milling
Просмотров 277Месяц назад
Our second @haasautomation CNC mill is up and running! VF2SSYT has joined our existing VF2SS. This is a major milestone for our small workshop and opens up some new possibilities. @5th_Axis DV510 vises are helping to increase efficiency of working with smaller parts. Music in this video: "Pleasant Porridge" Kevin MacLeod (incompetech.com) Licensed under Creative Commons: By Attribution 4.0 Lice...
Giant Loop Mojavi on Ducati DesertX
Просмотров 595Месяц назад
Overview of @GiantLoopMoto Mojavi saddlebags installed on a Ducati DesertX equipped with @Perunmoto Top luggage rack, Side carriers and Tie-down brackets. For international orders, Perun moto products are available for purchase at: www.perunmoto.com/collections/ducati-desertx/products/ducati-desertx-top-luggage-rack www.perunmoto.com/collections/ducati-desertx/products/ducati-desertx-side-carri...
Perun moto BMW F900GS Top luggage rack and Givi Trekker Dolomiti top case
Просмотров 7432 месяца назад
Walkaround of Givi Trekker Dolomiti 46l top case installed on BMW F900GS. The bike is equipped with Perun moto Top luggage rack. For international orders, Perun moto products are available for purchase at: www.perunmoto.com/collections/bmw-f900gs/products/bmw-f900gs-top-luggage-rack For EU customers, please visit: www.perunmoto.eu/collections/bmw-f900gs/products/bmw-f900gs-top-luggage-rack Givi...
Perun moto Top luggage rack for BMW F900GS
Просмотров 1 тыс.2 месяца назад
Our first product for BMW F900GS is here. Take a look at how @Perunmoto Top luggage rack fits the new GS. Available for purchase at: www.perunmoto.com/collections/bmw-f900gs/products/bmw-f900gs-top-luggage-rack For EU orders please visit: www.perunmoto.eu/collections/bmw-f900gs/products/bmw-f900gs-top-luggage-rack Music: "Island Meet and Greet" Kevin MacLeod (incompetech.com) Licensed under Cre...
Perun moto Husqvarna 701 Luggage rack Gen2 with Kriega US-20 Drypack
Просмотров 5722 месяца назад
Walkaround and details - Perun moto Husqvarna 701 Luggage rack Gen2 & Extension plate Gen2 with Kriega US-20 Drypack. For a detailed write-up about fit and features, head over to our blog post: www.perunmoto.com/blogs/blog/kriega-us-20-drypack-on-husqvarna-701-enduro For international buyers, Perun moto products can be ordered from the links below: -Top rack: www.perunmoto.com/collections/husqv...
Quadlock phone mount installed on Perun moto Direct handlebar clamp AMPS for BMW R1300 GS
Просмотров 3762 месяца назад
We have tested the fit of @Quad_Lock phone mount on Perun moto Direct handlebar clamp APS for BMW R1300 GS. For minimalist setup we have used QuadLock Lever head. For touring or other longer rides, we also tried the fit of QuadLock Weatherproof wireless charging head (having wireless charging makes life a lot easier when it's raining). Both heads need QuadLock Flat rectangle 4 hole base to conn...
Perun moto Direct handlebar clamp AMPS for BMW R1300 GS
Просмотров 1333 месяца назад
Overview of Perun moto Direct handlebar clamp APS for BMW R1300 GS. This product is made for 32mm oversize handlebars which can be found on recent BMW bikes. Available for purchase at: www.perunmoto.com/collections/bmw-r1300gs/products/direct-handlebar-clamp-32-0-mm-bmw-amps For EU orders please visit: www.perunmoto.eu/collections/bmw-r1300gs/products/direct-handlebar-clamp-32-0-mm-bmw-amps Mus...
Perun moto Aprilia Tuareg Top luggage rack and Tie-down brackets with Kriega OS-18 and US-40
Просмотров 1,4 тыс.3 месяца назад
Perun moto Aprilia Tuareg Top luggage rack and Tie-down brackets with Kriega OS-18 and US-40
Perun moto Aprilia Tuareg Top luggage rack and Tie-down brackets with Mosko Moto Reckless 40
Просмотров 1,7 тыс.3 месяца назад
Perun moto Aprilia Tuareg Top luggage rack and Tie-down brackets with Mosko Moto Reckless 40
Perun moto Tie-down brackets for Aprilia Tuareg 660
Просмотров 4733 месяца назад
Perun moto Tie-down brackets for Aprilia Tuareg 660
Perun moto Ducati DesertX Side carriers with Giant Loop Possibles pouches
Просмотров 2,3 тыс.4 месяца назад
Perun moto Ducati DesertX Side carriers with Giant Loop Possibles pouches
Perun moto KTM 690 2019+ Luggage rack and Heel guards with Giant Loop Mojavi saddlebags
Просмотров 1,1 тыс.4 месяца назад
Perun moto KTM 690 2019 Luggage rack and Heel guards with Giant Loop Mojavi saddlebags
Perun moto Aprilia Tuareg 660 Top luggage rack with Mosko moto Backcountry Duffle
Просмотров 8574 месяца назад
Perun moto Aprilia Tuareg 660 Top luggage rack with Mosko moto Backcountry Duffle
Perun moto Husqvarna 701 Luggage rack and Heel guards with Mosko moto Reckless 10
Просмотров 2 тыс.4 месяца назад
Perun moto Husqvarna 701 Luggage rack and Heel guards with Mosko moto Reckless 10
Perun moto Ducati DesertX Top luggage rack and Tie-down brackets with Giant Loop Siskiyou
Просмотров 1,5 тыс.4 месяца назад
Perun moto Ducati DesertX Top luggage rack and Tie-down brackets with Giant Loop Siskiyou
Perun moto Ducati DesertX Top luggage rack and Tie-down brackets with Mosko moto Reckless 80 (V4.0)
Просмотров 7 тыс.5 месяцев назад
Perun moto Ducati DesertX Top luggage rack and Tie-down brackets with Mosko moto Reckless 80 (V4.0)
Perun moto KTM 690 2019+ Luggage rack & Extension plate with Kriega US-40 Rackpack
Просмотров 7595 месяцев назад
Perun moto KTM 690 2019 Luggage rack & Extension plate with Kriega US-40 Rackpack
Perun moto Tie-down brackets for Ducati DesertX
Просмотров 1,1 тыс.5 месяцев назад
Perun moto Tie-down brackets for Ducati DesertX
Perun moto Top luggage rack (Gen2) for Ducati DesertX
Просмотров 6995 месяцев назад
Perun moto Top luggage rack (Gen2) for Ducati DesertX
Perun moto Ducati DesertX Top luggage rack with Kriega US-40 Rackpack
Просмотров 2,1 тыс.6 месяцев назад
Perun moto Ducati DesertX Top luggage rack with Kriega US-40 Rackpack
Perun moto KTM 690 2019+ Luggage rack, Extension plate and Heel guards with Kriega OS-18 & US-40
Просмотров 3,4 тыс.6 месяцев назад
Perun moto KTM 690 2019 Luggage rack, Extension plate and Heel guards with Kriega OS-18 & US-40
Perun moto Husqvarna 701 Luggage rack and Heel guards with Mosko moto Reckless 80, minimalist setup
Просмотров 2,4 тыс.6 месяцев назад
Perun moto Husqvarna 701 Luggage rack and Heel guards with Mosko moto Reckless 80, minimalist setup
I got mine and installed it and I am using the Kriega US40 it’s just perfect! Thanks guys
What kind of muffler protection? Who is the manufacturer?
You mean the heat shield? It's Giant Loop. Most definitely not needed for this type of luggage.
Makane nek koe ndelok topan torisne ning duwur ......ngisor kui malah tumouane kekuattane lucu pora.......kecil menganta ringan tumah kendaraan pohon hpne langit nej ndue tuhan allah swt nek kristen opo nek buda opo nek yahudi oponeh hindu opo sak senengmu hakmu nek ra ndue yo sak senngmu .ora malah agama di fungsikke senjata ndasmu kui.
Can I mount a Givi top case on this rack?
Yes. Check Section II here - www.perunmoto.com/pages/perun-moto-aprilia-tuareg-660-top-luggage-rack-installation-instructions
@@Perunmoto Wow! 😲 Thank you. I only need the small bits that attach to the Perun Moto rack and I should be good to go.
Great stuff, already installed on my 900. 👍 Do you plan some kind of minimalistic side racks, like on the DesertX e.g.?
Maybe. But not sure. Geometry of the rear end is very different (wide sub-frame, high silencer, not too much room between silencer and seat line etc.) then the one on Dx. We could make some Aux Pox / OS-6 carrier plates, but without an option to carry larger rack-less system above that. Which kind-of defies the original purpose of Side carriers. We tested a lot of rack-less system on the bike with our rack and tie-downs and most of them work great without the need for some lateral support. We may offer minimalistic lateral support for the LHS only, as some rack-less systems may benefit from this.
Needs anodized black hardware bad.
Nice DIY task, for stealth look. Bolts are steel, for strength. They can be black, but corrosion resistance would be compromised.
Beautiful!!😍 .. thanks Nikola 🤟
Will try it on my 21 gs i also add the dampener otherwise the phone cam won’t survive
Yea, that might be a good idea. It depends on the phone, of course. QuadLock offers nice damper, within their ecosystem.
Richtig gut 👍
Heat shield required on the exhaust?
Yes.
so u need to take off the foot pegs for the passenger?
If you want to install our Heel guards - yes, you need to remove passenger foot pegs.
Hi Nikola. Thx for this video. Is there any chance you could do a video showing this rack with the Reckless 80 on the 900GS? Thx, Stevie
We will do that in the next month or two.
Thank you 👍😊
Add Tutorial also… it’s helps a lot…
@@stevia13 Here is the link for Mosko Reckless 80 on F900 ;) ruclips.net/video/z287n27lRH8/видео.htmlsi=0s8H_898vqD7m3I9
Nice! We love all of your work!
Thanks a lot! 🙏
do you still have that 1090?
@@portlandtwowheels1872 nope, long gone. It was one of my all time favorites.
@@portlandtwowheels1872 Sadly no. It had to go, space in the workshop is limited :)
I still have mine and all of the parts from you. they sure can take a beating
😎
Does the Gen 2 rack allow for mounting the Kreiga 690/701 OS base with the OS rack loops vs. the Kreiga sub frame loops needed for the Gen 1 rack?
We will soon publish a video with 690/701 OS-base on 701. There are several viable mounting options available, depending on do you have Extension plate installed or not.
@@nikolamaletic Excellent. Just put my email in on the website to be notified when its back in stock.
My strap, which is mounted on the Perun heelguard, snaped on the edge of the healguard. Is there any way, how I can protect the straps better, because on the other side also the strap starts wearing out. My Mosko Moto 80 was brand new before my last 10 day trip through south Blakans. Maybe my heels rubbing around the straps while riding. I guess, that the Healguards stick a bit out on the end of the edges. I think about to bend it a bit to the swing arm side, to less rubbing around.
Thanks for reaching out and sharing this. Luckily, straps on R80 are replaceable. We noticed that there may be some premature wear on the straps on R80. I don't think the blame is on the straps. I think the thing is that A) R80 bags are usually loaded heavier than any other rack-less bags and B) straps are not secure enough so they move - when the bags are installed, straps are tightened, but due to weight, when bags 'settle' during the ride, one side is looser then the other. It may be a good idea to retighten the straps after hour or so of riding. We are working on new generation of the Heel guards and we will make even smoother edges.
Thank for your quick response. I have already ordered new straps from Mosko Moto. The Perun products are great and very well engineered and I always recommended your products in my group. 👍 One of my good friends which introduced Perun products to me is Jakob Weinknecht.
@@TRIUMPHUS1 Thank you for the kind words! Greetings to you and Jakob!
And here I am looking at the Mosko Back Country and I’m wondering what it will look like on my Tuareg. Thank you for filming this!
That's what you call "good timing" :D It's a really good, robust bag.
Awesome 💪🏼
Soon in our EU shop ;)
Any particular reason you used T700 vs Tuareg specific Kriega base? Love the look and functionality of your rack and the Kriega bags.
When we got Tuareg, there was no Tuareg-specific OS-Base. Of course, Tuareg-specific base should fit even better. We will test it in couple of weeks.
@@Perunmoto any updates on the fitment? I just installed your rear luggage rack and would like to confirm which OS base to purchase.
@@josiahortega9284 We still didn't get our hands on the Tuareg specific OS Base. With that said, T700 base fits really well and I don't feel any rush to change.
@@Perunmoto Thank you for the response. I'll just purchase the T700 base.
Asking out of curiosity, why the 3 “rings” to strap things? Is 1 not enough? What bags do you think could be strapped?
Three slots provide more flexibility when it comes to finding ideal position and angle of the bags. All of the luggage systems require different positioning in order to perform the best they can. We have tested and used these with Mosko moto Reckles 10, 40 and 80, Kriega OS base (for Tenere 700) and OS-18 bags, Giant Loop Great Basin and Mojavi and with Enduristan Blizzard XL.
❤❤❤ thank you! I already have your rack in my tuareg, works perfect and looks even better 😊
Will you make a similar kit for the ducati 698?
Not in the plans, at the moment.
Probably worth a mention that this base isn't the 701/690 specific base
Absolutely. At the time this video was created dedicated 690/701 OS base didn't exist. So this is Kriega's "universal" OS-base.
Good video. Is that exhaust guard necessary with this setup?
Mounted like this, the bags aren't touching the exhaust. With that said, I would always suggest to use the heat shield. They weigh next to nothing and provide peace of mind.
Thanks! Will keep that in mind.
nice setup
Thanks. DX's slim rear end makes a great platform for mounting of small bags.
Hi, will it fit the Gen1 plate in the same way?
Hi. Unfortunately not. Gen 1 rack has a different pattern of holes.
This is good, for a reasonably light load you dont need those big ass side racks everyone puts on these bikes. The rackless bags I have, have the cut out for the 690R gas cap. Which only makes sense. These bikes need gas sort of often compared to my 890R which can go 265 miles on one tankful. The rear subframe/gas tank is designed to hold a passenger, which could be 160lbs or even more. So it should be fine with a moderately light load on it. I dont want to add any more weight to the 690R than I have to.
Can vouch for the quality of these products and excellent customer service.
Thanks, buddy! 👍
Thanks , useful
Bravi 💪🏾
Very good system, I Also need it for my 690 Enduro R, is shipping to Germany very expensive?
Thanks! We have EU web site and the stock is in Germany. So shipping is very reasonable - www.perunmoto.eu/collections/ktm-690-enduro-enduro-r
@@Perunmoto Ok
Where did you get the motorcycle maneuvering rail with rocker?
Hi, the dolly is made by these guys www.blacksmith011.com/ Super sturdy, easy to move the bike around the shop.
@@Perunmoto Thanks👍 Is there only an option to order there via email address? I just see that it comes from Serbia Best regards
@@regarolt1691 Not sure, sorry. There is an email in the Contact section of the web site, send them a message.
@@Perunmoto You ordered them too?
@@regarolt1691 Yes,. But we are in Serbia, I just went there and picked them up. :)
Belle 💪🏾
Çok işime yaradı teşekkürler. Türkiye'den selamlar.
Glad you found it helpful! Regards from Belgrade!
I’ve just ordered the two racks from Perun.. their response to emails is 1st class !! ❤❤❤
Thanks for your support :)
this is exactly the video I need !!
If you can, subscribe to my RUclips channel Moto Explorer bike stories 👍
Wow, is there anything to dislike about that installation? Perfect ! thanks for posting the video
Installation is super quick and easy, I don't see what could be better. 👍
please build these side carriers for the Honda AT 1100 ....
Molto interessante
Grazie
Great product 👍👍👍 thanks perun moto
Thanks, Oli! 💪👍
Кайф! Отлично выглядит! Когда у меня будет 690-й, тоже поставлю себе такую систему.
You will love the 690! And this setup too.
This is exactly the set up Id like for my 2023 701 - but cant you make some side luggage racks to protect the rear plastics and also the bags from falling in to the rear wheel - this is what Mosko Moto recommend themselves. PLEASE!!! 😉
Thanks for the comment! I ride 2023 701. Reckless 80 fits perfectly! If the bags are set properly (so the cutout on the base is above the fuel cap), bags rests completely on the rear side plastics and they don't need more lateral support. Tried and tested many, many times. No way bags can get in contact with the rear wheel or swing arm (unless bags are mounted too much towards the rear). Yes, side plastic will get scuffed but that is inevitable. If this really bothers you, you can apply some clear self adhesive film to protect them. By the way, check prices of the new OEM plastics, they are very reasonable.
@@Perunmoto Thanks for getting back so quickly 👍🏼 Id heard the rear sub frame on the 701 was potentially a weak point - or is it the front subframe??? I know you guys sell the (tank) reinforcement kit. Is the rear subframe ok with the weight of the bags etc when they are loaded :-))))
@@stevia13 You are welcome! You can find a lot of info about this 'issue' here - www.perunmoto.com/blogs/blog/ktm-690-enduro-and-husqvarna-701-tank-bolts-issue-explained. Everything written there applies to the 2023 and 2024 bikes too. In short, rear subframe (tank on this bike) is almost indestructible, but you may consider upgrading tank bolt assembly.
Exhaust?
It is Wings silencer, if that is the question. Due to the new material for the bags base and support provided by Extension plate, bags are safe from the silencer, there is plenty of clearance. Heat shield is still advised.
There is a good reason so many choose both mosko and Perun! Great to see your ongoing work for us 👏🏻
Thanks! Appreciate the comment! 🙂
More like a Mosko Moto commercial.
Hi Carl! This is not a review and it is not titled like one. Sorry it that was not clear enough. It is an overview of these bags on the motorcycle equipped with the parts we at Perun moto make. We also do the same videos with Enduristan, Giant Loop, Kriega etc. By the way, Reckless 80 is great. I love it.
Can't it get any easier? 1.3 kg is a lot
Depends on the point of view. We aimed for a balance between strength and weight. IMO, we did well. I would rather read complaints about few hundreds grams more or less then complaints about rack broke in the middle of nowhere.
@@Perunmoto Thank you for commenting on this, that's understandable - it's also intended to support us customers in the long term
Can't it get any easier? 1.3 kg is a lot
Depends on the point of view. We aimed for a balance between strength and weight. IMO, we did well. I would rather read complaints about few hundreds grams more or less then complaints about rack broke in the middle of nowhere.
Access to the tank?
Loose the rear straps (or unclip the Gnoblin, if you use it), move the bag forward. If this is a deal breaker, there are other options. R80 has a cutout for refueling.
@@Perunmoto perfect! Thx
Great work once again 👏🏻 Looks great 🔥
Thanks! 🤜🤛
Best tuareg rack I’ve seen 😮
We agree! :) Many thanks for the comment!